


| パラメータ | 価値 |
|---|---|
| 重さ: | 0.127 kg |
| 品番: | 7000-15501-8310100 |
| 原産国: | CZ |
| モデル指定: | MSYAL0-08D831_1.0-ZS |
| コーディング(技術データ) | Y |
| スレッド(技術データ) | M12 x 1 |
| デュプレックス(技術データ) | Full duplex |
| 材質(技術データ) | PUR |
| ケーブル長(技術データ) | 1 m |
| ケーブル出口(技術データ) | straight |
| 取り付けセット(技術データ) | M12 x 1 |
| 極数(技術データ) | 8 |
| 構成(技術データ) | fully used |
| コーティングロック(技術データ) | Nickeled |
| 取り付け方法(技術データ) | inserted, screwed, Shaking protection |
| ロック材(技術データ) | Zinc die-casting |
| 汚染度(技術データ) | 3 |
| 製品規格(技術データ) | DIN EN 61076-2-101 (M12) |
| 締め付けトルク(技術データ) | 0,6 Nm |
| フィッティングのコーティング(技術データ) | nickel plated |
| 二面幅(技術データ) | SW13 |
| 定格サージ電圧(技術データ) | 0,8 kV |
| 転送パラメータ(技術データ) | CAT5, Class D (ISO/IEC 11801:2002), (EN 50173-1) |
| ストレインリリーフに関する注意事項(技術データ) | Protect the connectors by suitable measures from mechanical loads, e.g. by the usage of cable ties. |
| ステータス表示LED(技術データ) | no |
| 曲げ半径に関する注意事項(技術データ) | Attention:Observe the permissible bending radii when laying cables, as the IP protection class can be endangered by excessive bending forces. |
| 家族構成フォーム(技術データ) | free cable end |
| 材質ネジ接続(技術データ) | Zinc die-casting |
| 動作電圧 AC 最大 (技術データ) | 50 V |
| 動作電圧 DC 最大 (技術データ) | 50 V |
| 被覆剥ぎ長さ(ジャケット)(技術データ) | 80 mm |
| 動作温度範囲(技術データ) | -25 °C |
| コルゲートホースの輪郭(技術データ) | without |
| 最大データ転送速度(技術データ) | 100 MBit/s |
| 材料グループ(IEC 60664-1)(技術データ) | I |
| 動作電圧 AC (UL規格準拠) (技術データ) | 30 V |
| 動作電圧 DC (UL規格準拠) (技術データ) | 30 V |
| 接点あたりの動作電流(UL)(技術データ) | 3,3 A |
| 保護等級(EN IEC 60529)(技術データ) | IP67 |
| 追加条件保護等級(技術データ) | inserted, screwed |
| 追加条件温度範囲(技術データ) | depending on cable quality |
| データ接点あたりの最大動作電流(技術データ) | 0,5 A |
| 電源接点あたりの最大動作電流(技術データ) | 6 A |
技術仕様と性能データ
設置・操作ガイド