

| パラメータ | 価値 |
|---|---|
| 1 Byte (PROFIBUS) | |
| タイプ | modular |
| 深さ | 62 mm |
| 幅 | 14.9 mm |
| 身長 | 62.2 mm |
| 電流消費量 | max. 0 mA |
| 製品タイプ | I/O component |
| IDコード(16進数) | none |
| 取り付けタイプ | Smart Element slot |
| 製品ファミリー | Axioline Smart Elements |
| 供給電圧 | using card edge connectors |
| 接続名 | I/O |
| 汚染度 | 2 (IEC 60664-1, EN 60664-1) |
| 保護クラス | III (IEC 61140, EN 61140, VDE 0140-1) |
| 剥ぎ取り長さ | 8 mm |
| 接続方法 | Card edge connector |
| 取り付け位置 | See the system in which the Smart Element is used. |
| 消費電力 | max. 0 mW |
| 入力アドレスエリア | 0 Byte (All systems except PROFIBUS) |
| 保護回路 | Surge protection; See the system in which the Smart Element is used. |
| 伝送速度 | See system in which you use the Smart Element. |
| 消費電流 | min. 0 mA (without connected peripherals) |
| 寸法図 | |
| 出力アドレス領域 | 0 Byte |
| 保護の程度 | IP20 |
| インターフェースの数 | 1 |
| 過電圧カテゴリー | II (IEC 60664-1, EN 60664-1) |
| プロセスデータチャネル | 0 bit |
| 供給電圧範囲 | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| 必要なパラメータデータ | 1 Byte |
| 空気圧(動作) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| 導体断面積 AWG | 24 ... 16 |
| 必要な構成データ | 6 Byte |
| 導体断面積は剛性 | 0.25 mm² ... 1.5 mm² |
| 接続方法に関する注意 | Please observe the information provided on conductor cross sections in the “Axioline Smart Elements” user manual. |
| 導体断面積、剛性 | 0.25 mm² ... 1.5 mm² |
| 周囲温度(動作) | -25 °C ... 60 °C |
| 空気圧(保管・輸送) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| 導体断面積が柔軟 | 0.25 mm² ... 1.5 mm² |
| 許容湿度(動作) | 5 % ... 95 % (non-condensing) |
| 導体断面積、フレキシブル | 0.25 mm² ... 1.5 mm² |
| 周囲温度(保管/輸送) | -40 °C ... 85 °C |
| 許容湿度(保管/輸送) | 5 % ... 95 % (non-condensing) |
| テスト電圧: 24 V電源 (I/O) / 機能接地 | 500 V AC, 50 Hz, 1 min. |
| テスト電圧: 通信電源 / 24 V電源 (I/O) | 500 V AC, 50 Hz, 1 min. |
| 試験電圧: 通信電源 / 機能接地 | 500 V AC, 50 Hz, 1 min. |
| 導体断面、フレキシブル、フェルール付き、プラスチックスリーブ付き | 0.25 mm² ... 1.5 mm² |
| 導体断面はフレキシブル、フェルール付き、プラスチックスリーブなし | 0.25 mm² ... 1.5 mm² |
技術仕様と性能データ
設置・操作ガイド