

| パラメータ | 価値 |
|---|---|
| 1 Byte (PROFIBUS) | |
| リンク | Card Edge Connectors |
| タイプ | modularity |
| 深さ | 62 mm |
| 入力 | max. 120 W (of which 1.06 W internal losses) |
| 幅 | 14.9 mm |
| 身長 | 62.2 mm |
| リンクの命名 | Outskirts |
| 製品タイプ | I/O Components |
| 取り付けタイプ | Slot Smart Element |
| 製品ファミリー | Axioline Smart Elements |
| セキュリティクラス | III (IEC 61140, EN 61140, VDE 0140-1) |
| 剥ぎ取り長さ | 8 mm |
| 保護回路 | Prot. against overvoltages; See the system where you are using the Smart Element. |
| 伝送速度 | See the system where you are using the Smart Element. |
| 消費電流 | max. 4 A |
| 汚染度 | 2 (IEC 60664-1, EN 60664-1) |
| 寸法図 | |
| 入力アドレス範囲 | 0 Bytes (all systems except PROFIBUS) |
| 保護の程度 | Ip20 |
| インターフェースの数 | 1 |
| 出力アドレス範囲 | 0 Bytes |
| 過電圧カテゴリー | II (IEC 60664-1, EN 60664-1) |
| 電源電圧 | via Card Edge connectors |
| プロセスデータチャネル | 0 Bit |
| 供給電圧範囲 | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| IDコード(16進数) | none |
| 設置場所 | See the system where you are using the Smart Element. |
| 構成データが必要 | 6 Bytes |
| 接続タイプに関する注意 | Observe the information on the conductor cross-sections in the "Axioline Smart Element" user manual. |
| 空気圧(動作) | 70 kPa ... 106 kPa (up to 3000 m a.s.l.) |
| AWG導体断面積 | 24 ... 16 |
| 導体断面積AWG | 24 ... 16 |
| 剛性導体断面 | 0.25 mm² ... 1.5 mm² |
| パラメータ化データの必要性 | 1 Byte |
| 周囲温度(動作時) | -25 °C ... 60 °C |
| フレキシブル導体断面 | 0.25 mm² ... 1.5 mm² |
| 許容湿度(動作) | 5 % ... 95 % (non-condensing) |
| 空気圧(輸送および保管) | 70 kPa ... 106 kPa (up to 3000 m a.s.l.) |
| 周囲温度(保管/輸送) | -40 °C ... 85 °C |
| 許容湿度(保管/輸送) | 5 % ... 95 % (non-condensing) |
| テスト電圧: ロジック電源 / 機能グランド | 500 V AC, 50 Hz, 1 min. |
| 試験電圧: 24 V電源(周辺)/機能接地 | 500 V AC, 50 Hz, 1 min. |
| テスト電圧: ロジック電源 / 24V電源(周辺) | 500 V AC, 50 Hz, 1 min. |
| フレキシブル導体断面、ラグとプラスチックカラーを取り付けた構造 | 0.25 mm² ... 1.5 mm² |
| プラスチックカラーのないケーブルラグを備えたフレキシブル導体断面 | 0.25 mm² ... 1.5 mm² |
技術仕様と性能データ
設置・操作ガイド