サービス時間: 月曜日~金曜日 9:00-18:00
CA2T3 - CA2T3 CA2-T3 PANASONIC Digital panel meter, signal input -1 to 1V, 4 digit LED, NPN
在庫あり 注目商品

CA2T3

CA2T3 CA2-T3 PANASONIC Digital panel meter, signal input -1 to 1V, 4 digit LED, NPN

$0.00米ドル
4623 在庫あり
主な仕様
アイテム:Specifications
画面:4 digit 7-segment red LED display(letter height: 8 mm0.315 in)
製品:Ultra-compact Digital Panel Controller
材料:Enclosure: Polycarbonate
サプライヤー情報
PANASONIC
PANASONIC
製品: 4316
通常、2〜3営業日以内に出荷します
品質保証済み
高速配送
テクニカルサポート

技術仕様

パラメータ価値
アイテムSpecifications
画面4 digit 7-segment red LED display(letter height: 8 mm0.315 in)
製品Ultra-compact Digital Panel Controller
材料Enclosure: Polycarbonate
機能Auto-reference function, zero-adjust function, scale setting function, threshold value setting function, hysteresis setting function, comparative output timer function, start / hold function, memory clear function, power supply ON-delay function etc.
正味重量Net weight: 55 g approx.
部品番号CA2-T3
製品名Ultra-compact Digital Panel Controller CA2
バックアップメモリNon-volatile memory (EEPROM), Guaranteed write operations: 1,000,000 or less
製品番号CA2-T3
供給電圧24 V DC ± 10 % Ripple P-P 10 % or less
接続方法Terminal block connection
消費電力2.8 W or less
解像度の設定1 digit
開始/ホールド入力High level (supply voltage, or open): Start, Low level (1.5 V or less): Hold
表示:表示範囲Selectable span of 4,000 Nos. between -9999 to +9999 is displayed. ("+" is not displayed)
ディスプレイ:表示精度±(0.1 % F.S. + 1 digit) at 23 ± 5 ℃73.4 ± 41 ℉, 35 to 85 % RH
アナログ入力:入力範囲±1 V
インジケーター:OUT2動作Orange LED(Measurement mode: Lights up when OUT 2 is ON. Blinks when display is changed to OUT 2 threshold value display.Setting mode: Blinks when OUT 2 threshold value and comparison conditions are set or when full scale of scale setting function is set.)
アナログ入力:入力方法Single end input
インジケーター:OUT 1 動作Orange LED(Measurement mode: Lights up when OUT 1 is ON. Blinks when display is changed to OUT 1 threshold value display.Setting mode: Blinks when OUT 1 threshold value and comparison conditions are set or when zero scale of scale setting function is set.)
アナログ入力:入力数1 No.
アナログ入力: サンプリングレートSelectable from 200 times/sec., 20 times/sec., 10 times/sec. or 5 times/sec.
閾値設定範囲-9999 to +9999
ディスプレイ: ディスプレイのリフレッシュレートSelectable from 20 times/sec., 10 times/sec., 5 times/sec., 2.5 times/sec., 1 time/sec. or 0.5 time/sec.
アナログ入力:入力インピーダンス1 MΩ
インジケーター:極性表示Red LED(lights up when the displayed value or the threshold value is negative)
比較出力(OUT 1、OUT 2)NPN open-collector transistor・ Maximum sink current: 100 mA・ Applied voltage: 35 V DC or less (between comparative output and GND)・ Residual voltage:1.3 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
アナログ入力:A/D変換方式Successive approximation method
表示:温度特性±0.5 % F.S. over 0 to +50 ℃+32 to +122 ℉
インジケーター:自動参照操作Green LED(lights up when auto-reference function is used)
耐環境性:周囲湿度35 to 85 % RH, Storage: 35 to 85 % RH
耐環境性:耐衝撃性294 m/s2(30 G) acceleration in X, Y and Z directions three times each
比較出力(OUT 1、OUT 2):ヒステリシスVariable from 1 to 3,999 digits
耐環境性:周囲温度0 to +55 ℃+32 to +131 ℉(No dew condensation), Storage: -20 to +70 ℃-4 to +158 ℉
耐環境性:耐振動性10 to 55 Hz frequency, 1.5 mm0.059 indouble amplitude in X, Y and Z directions for two hours each
耐環境性:絶縁抵抗100 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure
比較出力(OUT 1、OUT 2):応答時間5 ms or less(when start / hold input is used at a sampling rate of 200 times/sec.)
耐環境性:耐電圧性1,500 V AC for one min. between all supply terminals connected together and enclosure
ゼロ調整入力(0-ADJ.)/自動リファレンス入力(A-REF.)Input condition: Non-voltage contact or NPN open-collector transistor inputSignal condition: Negative logic, Input time duration 10 ms or moreSignal level: ON ... 1.5 V or less (output current: 10 mA or less), OFF ... Supply voltage or openGuaranteed No. of zero-adjust input usage: 10 million times or less (for zero-adjust back-up setting)

製品説明

More details
主な機能
  • 産業グレードの品質
  • RoHS準拠
  • CE認証取得
  • 1年保証

製品資料

データシート

技術仕様と性能データ

ユーザーマニュアル

設置・操作ガイド

Top