

| パラメータ | 価値 |
|---|---|
| -10 °C ... 70 °C (flexible installation) | |
| ピッチ | 2.77 mm |
| 高度 | ≤ 2000 m |
| シールド | no |
| ケーブルタイプ | 20X0.14 [PVC] |
| ケーブル長 | 20 m |
| ハロゲンフリー | no |
| 製品タイプ | System cable |
| ねじ山 | UNC 4-40 |
| UL AWMスタイル | 2464/1061 |
| 導体タイプ | Round cable set |
| AWG信号線 | 26 |
| ケーブル抵抗 | ≤ 145 Ω/km (20 °C) |
| 難燃性 | IEC 60332-1-2 (raw cable) |
| 接続方法 | D-SUB socket strip |
| 耐油性 | can withstand occasional splashes (raw cable) |
| 締め付けトルク | 0.2 Nm |
| 導体材料 | Tin-plated Cu litz wires |
| 操作上の注意 | For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met. |
| ポジション数 | 20 |
| 保護の程度 | IP00 |
| 絶縁抵抗 | ≥ 20 MΩ*km (20 °C) |
| 接続数 | 1 |
| 外装シース、カラー | gray |
| 公称動作モード | 100% operating factor |
| 動作電圧(AC) | ≤ 30 V AC |
| 動作電圧(DC) | ≤ 60 V DC |
| 外装材 | Semi-rigid PVC |
| 導体断面積 | 20x 0.14 mm² |
| ケーブル外径 | 7.60 mm ±0.4 mm |
| 電流(パスあたり、50°C) | ≤ 1 A (Uncoiled, see derating) |
| 電流(パスあたり、70°C) | ≤ 0.6 A (Uncoiled, see derating) |
| 挿入/離脱サイクル | > 200 |
| 絶縁体を含む線径 | 1 mm ±0.03 mm |
| 周囲温度(動作) | -40 °C ... 70 °C (fixed installation) |
| 導体構造信号線 | 7x 0.16 mm |
| 動的荷重容量(曲げ) | Max. bending cycles: 5000 (at a radius of ≥ 15x outside diameter) |
| 標準に準拠した接続 | IEC 60807-2 |
| 周囲温度(保管/輸送) | -40 °C ... 80 °C |
| 最小の曲げ半径、固定設置 | 64 mm |
| 保護等級(設置場所) | ≥ IP54 (Installation location) |
| 最小の曲げ半径、可動設置 | 120 mm |
技術仕様と性能データ
設置・操作ガイド