

| パラメータ | 価値 |
|---|---|
| When connecting the conductor, make sure that the CAPAROC modules are not pulled apart due to tensile force. Gaps must not be created between the modules. | |
| ヒューズ | electronic |
| 注記 | LABS release – in accordance with test specification VW PV 3.10.7:2005-0 |
| タイプ | Plug-in module |
| 深さ | 111.3 mm (incl. DIN rail 7.5 mm) |
| 幅 | 12.4 mm |
| 身長 | 132.4 mm |
| 高度 | ≤ 4000 m (amsl) |
| 材料 | PA 6 |
| 効率 | > 99 % |
| 製品タイプ | Device circuit breakers |
| 電圧降下 | 0.14 V (at 10 A) |
| 湿度テスト | 96 h, 95 % RH, 40 °C |
| 取り付けタイプ | pluggable onto CAPAROC CR… current rail |
| 定格電圧 | 12 V DC |
| シャットダウン時間 | 5 s (for overload 1.1…1.3 x INat IN≥ 4 A) |
| 識別 | UL/C-UL Listed UL 508 |
| 製品ファミリー | CAPAROC |
| チャンネルLEDオフ | off (Channel switched off) |
| チャンネルLED赤 | lit (Channel switched off, over- or undervoltage active) |
| チャンネル数 | 2 |
| スロット数 | 2 |
| スイッチオン遅延 | 50 ms (each channel preset by default) |
| トリッピング法 | E (electronic) |
| 汚染度 | 2 |
| 保護クラス | III |
| 定格電流IN | 10 A DC (per channel) |
| 剥ぎ取り長さ | 10 mm |
| チャンネルLED緑 | lit (Channel switched on) |
| 接続方法 | Push-in connection |
| 断面積AWG | (converted acc. to IEC) |
| フェイルセーフ要素 | 15 A DC (per output channel) |
| 動作電圧 | 10 V DC ... 30 V DC |
| 消費電力 | typ. 0.6 W (no load at 24 V) |
| ショック(操作) | 30g (11 ms period, half-sine shock pulse, according to IEC 60068-2-27) |
| チャンネルLED黄色 | lit (Channel switched on, channel load > 80% ) |
| 絶縁強度 | 35 V DC (Load circuit) |
| 寸法図 | |
| フィードバック抵抗 | max. 35 V DC |
| ポジション数 | 1 |
| 定格サージ電圧 | 0.5 kV |
| 保護の程度 | IP20 |
| 最大容量負荷 | ≤ 75000 µF (Depending on the current setting and the short-circuit current available) |
| 必要なバックアップヒューズ | Only required if Imaxof the power supply > the short-circuit switching capacity. Integrated failsafe element. |
| 温度ディレーティング | 20 A (Total current at 40°C) |
| チャンネルLED赤緑 | flashing (Channel switched off, programming mode active, current adjustment after overload or short-circuit release) |
| 許容差の測定 I | ± 10 % (typ.) |
| 振動(操作) | 5g (10 ... 150 Hz / 10 cycles / axis / X, Y, Z) |
| チャンネルLED赤黄 | flashing (Channel is overloaded and is switched off) |
| 過電圧スイッチオフ | ≥ 32.5 V DC (active) |
| 低電圧スイッチオフ | ≤ 8.5 V DC (active) |
| 規格/仕様 | EN 61000-6-2 |
| アクティブ電流制限 | typ. 2.0 x INat IN≤ 3 A |
| 閉回路電流 I0 | typ. 25 mA (no load at 24 V) |
| MTBF(IEC 61709、SN 29500) | 11140621 h (at 25 °C with 21 % load) |
| 導体断面積 AWG | 24 ... 12 |
| 定格電流(調整済み) | 2 A |
| 導体断面積は剛性 | 0.2 mm² ... 4 mm² |
| 周囲温度(動作) | -30 °C ... 65 °C (The temperature range of the power module must be taken into consideration) |
| 導体断面積が柔軟 | 0.2 mm² ... 4 mm² |
| 短絡スイッチング容量 | 300 A |
| UL 94準拠の難燃性評価 | V-0 |
| 周囲温度(保管/輸送) | -40 °C ... 70 °C |
| 導体断面、フレキシブル、フェルール付き、プラスチックスリーブ付き | 0.25 mm² ... 4 mm² |
| 導体断面はフレキシブル、フェルール付き、プラスチックスリーブなし | 0.25 mm² ... 4 mm² |
技術仕様と性能データ
設置・操作ガイド