


| パラメータ | 価値 |
|---|---|
| Fiber amplifier connector | |
| アイテム | Order code |
| モデル | E3X-HD11 |
| 形 | Type |
| 配線済み | E3X-HD11 2M |
| NPN出力 | PNP output |
| 応答時間 | Super-high-speed Mode (SHS) |
| 制御出力 | NPN output |
| 接続方法 | Pre-wired |
| 消費電力 | Normal Mode: 720 mW max. (Current consumption: 30 mA max. at 24 VDC, 60 mA max. at 12 VDC.)Power Saving Eco Mode: 530 mW max. (Current consumption: 22 mA max. at 24 VDC, 44 mA max. at 12 VDC.) |
| M8コネクタ(4ピン) | E3X-HD14 |
| 高速モード(HS) | Operate or reset: 250 µs |
| 電源電圧 | 12 to 24 VDC±10%, ripple (p-p) 10% max. |
| 標準モード(STND) | Operate or reset: 1 ms |
| ギガパワーモード(GIGA) | Operate or reset: 1 ms |
| 最大接続可能ユニット数 | 16 units |
| トランジスタ出力モデル | Communication unit model1 |
| ファイバーアンプコネクタ | E3X-HD6 |
| 光源(波長) | Red, 4-element LED (625 nm) |
| 相互干渉防止 | Possible for up to 10 units |
| M8プラグコネクタ(4ピン)付き30cm PVCケーブル | E3X-CN21-M3J-2 0.3M |
技術仕様と性能データ
設置・操作ガイド