


| パラメータ | 価値 |
|---|---|
| Fiber amplifierconnector | |
| アイテム | Functions |
| 形 | Type |
| 機能 | Power tuning |
| 配線済み | AND/OR output |
| NPN出力 | PNP output |
| I/O設定 | Output setting (select from channel 2 output, AND, OR, leading edge sync, falling edge sync, or differential output) |
| 応答時間 | Super-high-speed mode |
| 標準モード | 1 ms for operation and reset respectively |
| タイマー機能 | Select from OFF-delay, ON-delay, or one-shot timer.1 ms to 5 s (1 to 20 ms set in 1-ms increments, 20 to 200 ms set in 10-ms increments,200 ms to 1 s set in 100-ms increments, and 1 to 5 s set in 1 s-increments) |
| デジタルディスプレイ | Select from the following: Incident level for channel 1 + incident level for channel 2, Incident level + threshold, incident level percentage + threshold, incident light peak level + no incident light bottom level, minimum incident light peak level + maximum no incident light bottom level, long bar display, incident level + peak hold, incident level + channel |
| 保護回路 | Power supply reverse polarity protection, output short-circuit protection, mutual interference prevention |
| 感度設定 | Teaching and digital up/down keys |
| 保護の程度 | IEC 60529 IP50 (with protective cover attached) |
| 高解像度モード | 4 ms for operation and reset respectively |
| 電源電圧 | 12 to 24 VDC±10%, ripple (p-p) 10% max. |
| ファイバーアンプコネクタ1 | AND/OR output |
| 光源(波長) | Red LED (650 nm) |
| M8プラグコネクタ(4ピン)付き30cm PVCケーブル | E3X-CN21-M3J-2 0.3M |
技術仕様と性能データ
設置・操作ガイド