


| パラメータ | 価値 |
|---|---|
| (仕様と注文情報) | Female for adapter G1/4 |
| A (仕様と注文情報) | 43.3 |
| B(仕様と注文情報) | 21.1 |
| C (仕様と注文情報) | 13 |
| D (仕様と注文情報) | 9.2 |
| E (仕様と注文情報) | 34 |
| F (仕様と注文情報) | 3.7 |
| G (仕様と注文情報) | 17 |
| 5 m (仕様と注文情報) | XS5W-D422-G81-F |
| NPN(仕様と注文情報) | E8PC-010-E |
| タイプ(仕様と注文情報) | Appearance |
| モデル(仕様と注文情報) | E8PC-YA-A18 |
| 液体(仕様と注文情報) | 0 to 10 MPa |
| スレッド(仕様と注文情報) | G3/4×R1/8 |
| 重量(仕様と注文情報) | Approx.190 g |
| IO-Link(仕様と注文情報) | IO-Link specification |
| 高度(仕様と注文情報) | 2,000 m or less |
| L字型(仕様と注文情報) | 2 m |
| 材質(仕様と注文情報) | Wetted part |
| ボーレート(仕様と注文情報) | E8PC-⬜⬜⬜D: COM2 (38.4kbps)E8PC-⬜⬜⬜T: COM3 (230.4Kbps) |
| PNP(COM3) (仕様と注文情報) | E8PC-010T-E |
| 外観(仕様と注文情報) | Type |
| ヒステリシス(仕様と注文情報) | Variable |
| 0~40 MPa(仕様と注文情報) | PNP |
| アクセサリ(仕様と注文情報) | Throttle (Model E8PC-YSand E8PC-YS-N), one eachO-ring × 1 (Model E8PC-010: Model E8PC-YL-1, Model E8PC-100/400:Model E8PC-YL-2)Ferrite core × 1 (TDK's Model ZCAT1730-0730A)User's manual (Japanese, English, and Chinese), one eachCompliance sheetIndex list |
| データ長(仕様と注文情報) | PD Size: 6 byteOD Size: 1 byte (M-sequence type: TYPE_2_V) |
| ウィンドウモード(仕様と注文情報) | Judge if the measured value iswithin the upper and lower limits. |
| 電源(仕様と注文情報) | Power supply voltage |
| 遅延設定(仕様と注文情報) | 1 to 9999 ms(Select a function from invalid, ON delay, OFF delay, and one-shot.) |
| 表示範囲(仕様と注文情報) | –0.20 to 1.10 MPa |
| 圧力タイプ(仕様と注文情報) | Gauge pressure |
| 破裂圧力(仕様と注文情報) | 8 MPa |
| 表示方法(仕様と注文情報) | Numerical value indication: 4-digit 7-segment white LED with inverting functionStatus indicator: Normal operation (green), status indication (orange), and error (red) The content of status indication is selectable.Output indicator: OUT1 operation (orange), OUT2 operation (orange)Unit indication: E8PC-⬜⬜⬜⬜: MPa (white),E8PC-⬜⬜⬜⬜-E: MPa (white), bar (white), psi (white), °C (white)IO-Link indicator: Lighting when communications are in progress (green) |
| 外部入力(仕様と注文情報) | One-point teaching, zero point adjustment input (selectable, initial status: invalid)short-circuit current 1.5 mA or less, input time 20 ms or more |
| 適合流体(仕様と注文情報) | Gas and fluid not corroding thematerial of the wetted part (such as water, glycol solution, andoil) |
| 接続方法(仕様と注文情報) | M12, 4-pole connector type |
| 汚染度(仕様と注文情報) | 3 |
| COM3 (230.4 kbps) (仕様と注文情報) | E8PC-400T-E |
| L字型/L字型(仕様と注文情報) | 2 m |
| 消費電力(仕様と注文情報) | 1,200 mW or less(When power supply voltage is 30 V, current consumption must be 40 mA or less.When power supply voltage is 10 V, current consumption must be 120 mA or less.) |
| 保護回路(仕様と注文情報) | Power supply reverse connectionprotection, output short-circuit protection, and output reverseconnection protection |
| 接続直径(仕様と注文情報) | G3/4 male (Use the optional adapterto convert the diameter) Connection strength 20 N·m |
| ディスプレイ解像度(仕様と注文情報) | 0.001 MPa |
| 衝撃(耐久性)(仕様と注文情報) | 500 m/s2, three timesin X/Y/Z direction each |
| 設置場所(仕様と注文情報) | Indoor |
| 最小サイクルタイム(仕様と注文情報) | E8PC-⬜⬜⬜D (COM2): 3.2 msE8PC-⬜⬜⬜T (COM3): 2.0 ms |
| 公称直径A(仕様と注文情報) | Nominal diameter B |
| 保護構造(仕様と注文情報) | IP67 |
| 耐環境性(仕様と注文情報) | Ambient temperature range |
| 周囲湿度範囲(仕様と注文情報) | –35 to 85%RH in operation andstorage, respectively (no condensation) |
| 接液部以外(仕様と注文情報) | Head: PPSU, display unit: PES,button: PBT, chassis: SUS304L |
| 出力ch3(選択可能)(仕様と注文情報) | Control output |
| 出力ch4(選択可能)(仕様と注文情報) | Control output |
| ケーブルの片端にソケット(仕様と注文情報) | Straight |
| 温度再現性(仕様と注文情報) | ±1°C |
| 圧力監視精度(仕様と注文情報) | ±1.0% of F.S. or less |
| 耐衝撃性(破壊)(仕様と注文情報) | 10 to 2000 Hz, double amplitude1.5 mm, 2 hours in X/Y/Z direction each |
| 温度監視精度(仕様と注文情報) | ±4°C |
| 耐振動性(破壊)(仕様と注文情報) | 1000 VAC, 50/60 Hz, 1 min. betweencurrent-carrying parts and case |
| 制御出力判定(選択可能)(仕様と注文情報) | Standard mode |
| ケーブル端にソケットとプラグを装着した2タイプ。ストレートタイプとL字タイプの組み合わせもございます。(仕様・注文情報) | Straight/straight |
| 適用流体温度2配管温度が70℃を超える場合は、ケーブルを配管に接触させないでください。(仕様と注文情報) | –20 to +100°C (no icing or condensation) |
| アナログ電流出力2アナログ電流出力をIO-Linkのマスターユニットに接続しないでください。接続するとユニットが故障する可能性があります。(仕様と注文情報) | Pressure analog output / Temperature analog outputCurrent output 4 to 20 mA (maximum load resistance 350Ω or less)(Display value ± 2% of F.S.) |
| 圧力応答時間2設定応答時間が3~10msの場合は最大1ms、11~100msの場合は最大5ms、101ms以上の場合は±5%の誤差があります。(仕様と注文情報) | Control output: Select 3 to 6000ms Analog output: Set value + 2 ms (90% response) |
| 周囲温度特性2周囲温度特性は、油を用いて最大定格圧力の50%の圧力値を印加した状態で測定した値に基づいて規定されています。(仕様および注文情報) | ±0.6% of F.S./10°C |
| 圧力監視2圧力精度は、常温(約23℃)の水を用いて常温環境(約23℃)で測定した値に基づき定義されます。(仕様・注文情報) | Rated pressure range |
| 耐圧2ウォーターハンマーなどの瞬間的な圧力変動があっても、耐圧範囲内であることが必要です。瞬間的な圧力変動が予想される場合は、同梱のスロットルをご使用ください。(仕様・注文情報) | 4 MPa |
| 圧力再現性2常温(約23℃)の水を用いて、常温環境(約23℃)において定格圧力範囲内で繰り返し圧力を加えたときの検出点の誤差です。(仕様・注文情報) | ±0.3% of F.S. or less |
| 温度監視2温度監視精度は水を用いた測定値に基づいて規定されています。温度測定は、媒体温度と配管温度の両方の影響を受けます。温度測定素子は圧電素子の裏面(製品内部)に設置されており、熱伝達速度によっては測定値が安定するまでに時間がかかる場合があります。(仕様・注文情報) | Temperature monitoringrated range |
技術仕様と性能データ
設置・操作ガイド