ELN-30-27D

30W Single Output switching Power supply 30W Single Output switching Power supply30W Single Output switching Power supply ELN-30series ELN-30seriesELN-30seriesFeatures : Features :Features : UniversalAC input / Full range UniversalAC input / Full rangeUniversalAC input / Full range Protections: short circuit / Over current/ Over voltage Protections: short circuit / Over current/ Over voltageProtections: short circuit / Over current/ Over voltage Cooling by free air convection Cooling by free air convectionCooling by free air convection Built-in constant currentlimiting circuit with level adjustment OCP Built-in constant currentlimiting circuit with level adjustment OCPBuilt-in constant currentlimiting circuit with level adjustment OCP Optional dimming function : 1.1<10VDC(D type) or PWM (P type) controlled Optional dimming function : 1.1<10VDC(D type) or PWM (P type) controlledOptional dimming function : 1.1<10VDC(D type) or PWM (P type) controlled Fully isolated plastic case with IP64 level Fully isolated plastic case with IP64 levelFully isolated plastic case with IP64 level Classpower unit, no FG Classpower unit, no FGClasspower unit, no FG Class 2 power unit Class 2 power unitClass 2 power unit Pass LPS Pass LPSPass LPS Suitable for LED lighting and moving sign applications (Note.8) Suitable for LED lighting and moving sign applications (Note.8)Suitable for LED lighting and moving sign applications (Note.8) 100% full load burn-in test 100% full load burn-in test100% full load burn-in test Low-cost Low-costLow-cost 2 years warranty 2 years warranty2 years warrantySPECIFICATION SPECIFICATIONSPECIFICATIONLPS LPSLPSIP64 IP64IP64( for 48V only) ( except for 48V ) ( for 48V only) ( except for 48V )( for 48V only) ( except for 48V ) MODEL ELN-30-5 ELN-30-9 ELN-30-12 ELN-30-15 ELN-30-24 ELN-30-27 ELN-30-48 MODEL ELN-30-5 ELN-30-9 ELN-30-12 ELN-30-15 ELN-30-24 ELN-30-27 ELN-30-48MODEL ELN-30-5 ELN-30-9 ELN-30-12 ELN-30-15 ELN-30-24 ELN-30-27 ELN-30-48 THE DC VOLTAGE THE DC VOLTAGETHE DC VOLTAGE 5V 9V 5V 9V5V 9V 12V 12V12V 15V 15V15V 24V 24V24V 27V 27V27V 48V 48V48V LED OPERATION VOLTAGE Note.7 3 ~ 5V LED OPERATION VOLTAGE Note.7 3 ~ 5VLED OPERATION VOLTAGE Note.7 3 ~ 5V 3 ~ 9V 3 ~ 9V3 ~ 9V 3 ~ 12V 3 ~ 12V3 ~ 12V 3 ~ 15V 3 ~ 15V3 ~ 15V 3 ~ 24V 3 ~ 24V3 ~ 24V 3 ~ 27V 3 ~ 27V3 ~ 27V 3 ~ 48V 3 ~ 48V3 ~ 48V RATED CURRENT CURRENT RANGE RATED POWER RATED CURRENT CURRENT RANGE RATED POWERRATED CURRENT CURRENT RANGE RATED POWER 5A 3.4 A 2.5 A 2A 1.25 A 1.12 A 0.63 A 5A 3.4 A 2.5 A 2A 1.25 A 1.12 A 0.63 A5A 3.4 A 2.5 A 2A 1.25 A 1.12 A 0.63 A 0 ~ 5A0 ~ 3.4 0 ~ 2.5 0 ~ 2A0 ~ 1.25 A 0 ~ 1.12 A 0 ~ 0.63 A 0 ~ 5A0 ~ 3.4 0 ~ 2.5 0 ~ 2A0 ~ 1.25 A 0 ~ 1.12 A 0 ~ 0.63 A0 ~ 5A0 ~ 3.4 0 ~ 2.5 0 ~ 2A0 ~ 1.25 A 0 ~ 1.12 A 0 ~ 0.63 A 25W 30.6W30W 30W 30W 30.24W30.24W 25W 30.6W30W 30W 30W 30.24W30.24W25W 30.6W30W 30W 30W 30.24W30.24W RIPPLE & NOISE (max.) Note.2 80mVp-p100mVp-p120mVp-p120mVp-p150mVp-p150mVp-p250mVp-p RIPPLE & NOISE (max.) Note.2 80mVp-p100mVp-p120mVp-p120mVp-p150mVp-p150mVp-p250mVp-pRIPPLE & NOISE (max.) Note.2 80mVp-p100mVp-p120mVp-p120mVp-p150mVp-p150mVp-p250mVp-pOUTPUT VOLTAGE ADJ. RANGE of OUTPUT VOLTAGE ADJ. RANGE ofOUTPUT VOLTAGE ADJ. RANGE of 4.5 ~ 5.5 V 4.5 ~ 5.5 V4.5 ~ 5.5 V 8.7 ~ 10.5V10.8 ~ 13.2V13.5 ~ 16.5V21.6 ~ 26.4V24.3 ~ 29.7V43.2 ~ 52.8 V 8.7 ~ 10.5V10.8 ~ 13.2V13.5 ~ 16.5V21.6 ~ 26.4V24.3 ~ 29.7V43.2 ~ 52.8 V8.7 ~ 10.5V10.8 ~ 13.2V13.5 ~ 16.5V21.6 ~ 26.4V24.3 ~ 29.7V43.2 ~ 52.8 VCURRENT ADJ. RANGE of CURRENT ADJ. RANGE ofCURRENT ADJ. RANGE of Can be adjusted by internal potentiometer SVR1 Can be adjusted by internal potentiometer SVR1Can be adjusted by internal potentiometer SVR1 -25% ~3%. Can be adjusted by internal potentiometer SVR2 -25% ~3%. Can be adjusted by internal potentiometer SVR2-25% ~3%. Can be adjusted by internal potentiometer SVR2 VOLTAGE TOLERANCE Note.35.0% VOLTAGE TOLERANCE Note.35.0%VOLTAGE TOLERANCE Note.35.0% LINE REGULATION LOAD REGULATION LINE REGULATION LOAD REGULATIONLINE REGULATION LOAD REGULATION 1.0% 1.0%1.0% 2.0% 2.0%2.0% SETUP, RISE TIME Note.6500ms, 80ms / 230VAC1000ms, 80ms / 115VAC at full load SETUP, RISE TIME Note.6500ms, 80ms / 230VAC1000ms, 80ms / 115VAC at full loadSETUP, RISE TIME Note.6500ms, 80ms / 230VAC1000ms, 80ms / 115VAC at full load HOLD TIME (Typ.) HOLD TIME (Typ.)HOLD TIME (Typ.) 50ms/230VAC16ms/115VAC at full load 50ms/230VAC16ms/115VAC at full load50ms/230VAC16ms/115VAC at full load VOLTAGE RANGE Note.4 90 ~ 264VAC127 ~ 370VDC VOLTAGE RANGE Note.4 90 ~ 264VAC127 ~ 370VDCVOLTAGE RANGE Note.4 90 ~ 264VAC127 ~ 370VDC INPUT INPUTINPUTPROTECTION PROTECTIONPROTECTION FREQUENCY RANGE EFFICIENCY (Typ.) AC CURRENT (Typ.) FREQUENCY RANGE EFFICIENCY (Typ.) AC CURRENT (Typ.)FREQUENCY RANGE EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) INRUSH CURRENT (Typ.)INRUSH CURRENT (Typ.) MAX. No. of the power systems on the 16A CIRCUIT BREAKER of LEAKAGE CURRENT MAX. No. of the power systems on the 16A CIRCUIT BREAKER of LEAKAGE CURRENTMAX. No. of the power systems on the 16A CIRCUIT BREAKER LEAKAGE CURRENTOVER CURRENT MORE CURRENTMORE CURRENT OVER VOLTAGE OVER VOLTAGEOVER VOLTAGE 47 ~ 63Hz 47 ~ 63Hz47 ~ 63Hz 75%80%82%82%85%85%87% 75%80%82%82%85%85%87%75%80%82%82%85%85%87% 0.75 A/115VAC 0.48 A/230VAC 0.75 A/115VAC 0.48 A/230VAC0.75 A/115VAC 0.48 A/230VAC COLD start 55A(twidth=465s measured at 50% Ipeak) at 230VAC COLD start 55A(twidth=465s measured at 50% Ipeak) at 230VACCOLD start 55A(twidth=465s measured at 50% Ipeak) at 230VAC4 units (circuit breaker type B) / 8 units (circuit breaker type C) 230VAC 4 units (circuit breaker type B) / 8 units (circuit breaker type C) 230VAC4 units (circuit breaker type B) / 8 units (circuit breaker type C) in 230VAC0.25mA / 240VAC 0.25 mA / 240VAC0.25 mA / 240VAC 95 ~ 110% 95 ~ 110%95 ~ 110% Protection type : Constant current limiting, recovers automatically after fault condition is removed Protection type : Constant current limiting, recovers automatically after fault condition is removedProtection type : Constant current limiting, recovers automatically after fault condition is removed 5.75 ~ 6.75V11 ~ 13.5 13.8 V ~ 16V 17.5 ~ 21V 28 ~ 32V31 ~ 36.4 V 54 ~ 60V 5.75 ~ 6.75V11 ~ 13.5 13.8 V ~ 16V 17.5 ~ 21V 28 ~ 32V31 ~ 36.4 V 54 ~ 60V5.75 ~ 6.75V11 ~ 13.5 13.8 V ~ 16V 17.5 ~ 21V 28 ~ 32V31 ~ 36.4 V 54 ~ 60V Protection type : Shut down o/p voltage, re-power on to recover Protection type : Shut down o/p voltage, re-power on to recoverProtection type : Shut down o/p voltage, re-power on to recover THE FUNCTION DIMMING CONTROL (OPTIONAL) THE FUNCTION DIMMING CONTROL (OPTIONAL)THE FUNCTION DIMMING CONTROL (OPTIONAL) WORKING TEMP. WORKING HUMIDITY WORKING TEMP. WORKING HUMIDITYWORKING TEMP. WORKING HUMIDITY 1.1 ~ 10VDC or PWM signal : 100Hz ~ 3KHz 1.1 ~ 10VDC or PWM signal : 100Hz ~ 3KHz1.1 ~ 10VDC or PWM signal : 100Hz ~ 3KHz -20 ~ +60 (Refer to "Reduction Curve") -20 ~ +60 (Refer to "Reduction Curve")-20 ~ +60 (Refer to "Reduction Curve") 20 ~ 90% RH non-condensing 20 ~ 90% RH non-condensing20 ~ 90% RH non-condensing ENVIRONMENT ENVIRONMENTENVIRONMENT SAFETY AND EMC SAFETY AND EMCSECURITY AND EMCOTHERS OTHEROTHER STORAGE TEMP., THE HUMIDITY TEMP. COEFFICIENT VIBRATION STORAGE TEMP., THE HUMIDITY TEMP. COEFFICIENT VIBRATIONSTORAGE TEMP., THE HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION SAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSIONSAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF DIMENSION EMC IMMUNITY MTBF DIMENSIONEMC IMMUNITY MTBF DIMENSION PACKAGING PACKAGINGPACKAGING -40 ~ +80, 10 ~ 95% RH -40 ~ +80, 10 ~ 95% RH-40 ~ +80, 10 ~ 95% RH 0.03%/ (0 ~ 50) 0.03%/ (0 ~ 50)0.03%/ (0 ~ 50) 10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes 10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes UL1310, CAN/CSA C22.2 No. 223-M91(except for 48V), IP64 approved ; design refer to TUV EN60950-1 UL1310, CAN/CSA C22.2 No. 223-M91(except for 48V), IP64 approved ; design refer to TUV EN60950-1UL1310, CAN/CSA C22.2 No. 223-M91(except for 48V), IP64 approved ; design refer to TUV EN60950-1 I/P-O/P:3KVAC I/P-O/P:3KVACI/P-O/P:3KVAC I/P-O/P:>100m Ohms / 500VDC / 25/ 70% RH I/P-O/P:>100m Ohms / 500VDC / 25/ 70% RHI/P-O/P:>100m Ohms / 500VDC / 25/ 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2 Class a, EN61000-3-3 Compliance to EN55022 (CISPR22) Class B, EN61000-3-2 Class a, EN61000-3-3Compliance to EN55022 (CISPR22) Class B, EN61000-3-2 Class a, EN61000-3-3 Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level,criteria A Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level,criteria ACompliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level,criteria A 628.3 Khrs min.MIL-HDBK-217F (25) 628.3 Khrs min.MIL-HDBK-217F (25)628.3 Khrs min.MIL-HDBK-217F (25) 145*47*30 mm (L*W*H) 145*47*30 mm (L*W*H)145*47*30 mm (L*W*H) 0.26 Kg; 60pcs/16.6 Kg/1.25 CUFT 0.26 Kg; 60pcs/16.6 Kg/1.25 CUFT0.26 Kg; 60pcs/16.6 Kg/1.25 CUFTNOTE NOTENOTE 1. All the parameters are NOT speciallymentioned are measured at 230vac input, ratedload and 25 of ambient temperature. 1. All the parameters are NOT speciallymentioned are measured at 230vac input, ratedload and 25 of ambient temperature.1. All the parameters are NOT speciallymentioned are measured at 230vac input, ratedload and 25 of ambient temperature. 2. Curly and noiseare measured at 20 mhz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 2. Curly and noiseare measured at 20 mhz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.2. Curly and noiseare measured at 20 mhz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 3. Tolerance : includes setup tolerance, line regulation and load regulation. 3. Tolerance : includes setup tolerance, line regulation and load regulation.3. Tolerance : includes setup tolerance, line regulation and load regulation. 4. Deratingmay be necessary underlow of the input voltage.Please checkthe static characteristics for more details. 4. Deratingmay be necessary underlow of the input voltage.Please checkthe static characteristics for more details.4. Deratingmay be necessary underlow of the input voltage.Please checkthe static characteristics for more details. 5. The supply is considered a component which will be operated in combination with final equipment. SinceEMC the performance will be affected by the complete installation,the final equipment manufacturers must re-qualify EMC Directive on the complete installationagain. 5. The supply is considered a component which will be operated in combination with final equipment. SinceEMC the performance will be affected by the complete installation,the final equipment manufacturers must re-qualify EMC Directive on the complete installationagain.5. The supply is considered a component which will be operated in combination with final equipment. SinceEMC the performance will be affected by the complete installation,the final equipment manufacturers must re-qualify EMC Directive on the complete installationagain. 6. Lengthof installation time is measured at first cold start.Turn on/OFF the supply can lead to the increase of the setup time. 6. Lengthof installation time is measured at first cold start.Turn on/OFF the supply can lead to the increase of the setup time.6. Lengthof installation time is measured at first cold start.Turn on/OFF the supply can lead to the increase of the setup time. 7. Constant currentoperation region is within the specified output voltagerange up. This is the suitable operation region for LED related applications. 7. Constant currentoperation region is within the specified output voltagerange up. This is the suitable operation region for LED related applications.7. Constant currentoperation region is within the specified output voltagerange up. This is the suitable operation region for LED related applications. 8. The unit may not be suitable for lighting applications in EU countries. Please checkwith the local authorities for the possible use of the unit. 8. The unit may not be suitable for lighting applications in EU countries. Please checkwith the local authorities for the possible use of the unit.8. The unit may not be suitable for lighting applications in EU countries. Please checkwith the local authorities for the possible use of the unit.File name:ELN-30-SPEC2015-05-28 File name:ELN-30-SPEC2015-05-28File name:ELN-30-SPEC2015-05-28