ELN-60-24D

60W Single Output Class 2 Switching Power supply 60W Single Output Class 2 Switching Power supply60W Single Output Class 2 Switching Power supply ELN-60series ELN-60seriesELN-60seriesFeatures : Features :Features : UniversalAC input / Full range UniversalAC input / Full rangeUniversalAC input / Full range Protections: short circuit / Over current/ Over voltage Protections: short circuit / Over current/ Over voltageProtections: short circuit / Over current/ Over voltage Cooling by free air convection Cooling by free air convectionCooling by free air convection Built-in constant currentlimiting circuit with level adjustment OCP Built-in constant currentlimiting circuit with level adjustment OCPBuilt-in constant currentlimiting circuit with level adjustment OCP Optional dimming function : 1>10VDC (D type) or PWM (P type) controlled Optional dimming function : 1>10VDC (D type) or PWM (P type) controlledOptional dimming function : 1>10VDC (D type) or PWM (P type) controlled Fully isolated plastic case with IP64 level Fully isolated plastic case with IP64 levelFully isolated plastic case with IP64 level Classpower unit, no FG Classpower unit, no FGClasspower unit, no FG Class 2 power unit Class 2 power unitClass 2 power unit Pass LPS Pass LPSPass LPS Suitable for LED lighting and moving sign applications (Note.s) Suitable for LED lighting and moving sign applications (Note.s)Suitable for LED lighting and moving sign applications (Note.s) 100% full load burn-in test 100% full load burn-in test100% full load burn-in test Low cost,high reliability Low cost,high reliabilityLow cost,high reliability 2 years warranty 2 years warranty2 years warranty SPECIFICATION SPECIFICATIONSPECIFICATION LPS LPSLPS IP64 IP64IP64( for 48V only) ( except for 48V ) ( for 48V only) ( except for 48V )( for 48V only) ( except for 48V ) MODEL MODELMODEL ELN-60-9 ELN-60-9ELN-60-9 ELN-60-12 ELN-60-12ELN-60-12 ELN-60-15ELN-60-24 ELN-60-27ELN-60-48 ELN-60-15ELN-60-24 ELN-60-27ELN-60-48ELN-60-15ELN-60-24 ELN-60-27ELN-60-48 DC VOLTAGE9V DC VOLTAGE9VDC VOLTAGE9V LED OPERATION VOLTAGE Note.8 3 ~ 9V LED OPERATION VOLTAGE Note.8 3 ~ 9VLED OPERATION VOLTAGE Note.8 3 ~ 9V 12V 12V12V 6 ~ 12V 6 ~ 12V6 ~ 12V 15V 15V15V 7.5 ~ 15V 7.5 ~ 15V7.5 ~ 15V 24V 24V24V 12 ~ 24V 12 ~ 24V12 ~ 24V 27V 27V27V 13.5 ~ 27V 13.5 ~ 27V13.5 ~ 27V 48V 48V48V 24 ~ 48V 24 ~ 48V24 ~ 48V NOMINAL CURRENT5A NOMINAL CURRENT5ANOMINAL CURRENT5A 5A 4A 5A 4A5A 4A 2.5A2.3A 2.5A2.3A2.5A2.3A 1.3 A 1.3 A1.3 A CURRENT RANGE CURRENT RANGECURRENT RANGE 0 ~ 5A 0 ~ 5A0 ~ 5A 0 ~ 5A 0 ~ 5A0 ~ 5A 0 ~ 4A 0 ~ 4A0 ~ 4A 0 ~ 2.5A0 ~ 2.3 A 0 ~ 1.3 A 0 ~ 2.5A0 ~ 2.3 A 0 ~ 1.3 A0 ~ 2.5A0 ~ 2.3 A 0 ~ 1.3 A RATED POWER RATED POWERRATED POWER 45W 45W45W 60W 60W60W 60W 60W62.1W62.5W 60W 60W62.1W62.5W60W 60W62.1W62.5W RIPPLE & NOISE (max.) Note.2120mVp-p RIPPLE & NOISE (max.) Note.2120mVp-pRIPPLE & NOISE (max.) Note.2120mVp-p 8.7 ~ 10.5 V 8.7 ~ 10.5 V8.7 ~ 10.5 V 120mVp-p 120mVp-p120mVp-p 10.8 ~ 13.2 V 10.8 ~ 13.2 V10.8 ~ 13.2 V 150mVp-p 150mVp-p150mVp-p 13.5 ~ 16.5 V 13.5 ~ 16.5 V13.5 ~ 16.5 V 150mVp-p 150mVp-p150mVp-p 21.6 ~ 26.4 V 21.6 ~ 26.4 V21.6 ~ 26.4 V 200mVp-p 200mVp-p200mVp-p 24.3 ~ 29.7 V 24.3 ~ 29.7 V24.3 ~ 29.7 V 250mVp-p 250mVp-p250mVp-p 43.2 ~ 52.8 V 43.2 ~ 52.8 V43.2 ~ 52.8 V OUTPUT VOLTAGE ADJ. RANGE of Note.7 OUTPUT VOLTAGE ADJ. RANGE of Note.7OUTPUT VOLTAGE ADJ. RANGE of Note.7 Can be adjusted by internal potentiometer SVR1 Can be adjusted by internal potentiometer SVR1Can be adjusted by internal potentiometer SVR1 CURRENT ADJ. RANGE of Note.7-25% ~ 3%. Can be adjusted by internal potentiometer SVR2 CURRENT ADJ. RANGE of Note.7-25% ~ 3%. Can be adjusted by internal potentiometer SVR2CURRENT ADJ. RANGE of Note.7-25% ~ 3%. Can be adjusted by internal potentiometer SVR2 VOLTAGE TOLERANCE Note.35.0% VOLTAGE TOLERANCE Note.35.0%VOLTAGE TOLERANCE Note.35.0% LINE REGULATION LOAD REGULATION LINE REGULATION LOAD REGULATIONLINE REGULATION LOAD REGULATION 1.0% 1.0%1.0% 2.0% 2.0%2.0% SETUP, RISE TIME Note.6500ms, 30ms / 230VAC1500ms, 30ms / 115VAC at full load SETUP, RISE TIME Note.6500ms, 30ms / 230VAC1500ms, 30ms / 115VAC at full loadSETUP, RISE TIME Note.6500ms, 30ms / 230VAC1500ms, 30ms / 115VAC at full load HOLD TIME (Typ.) HOLD TIME (Typ.)HOLD TIME (Typ.) 50ms/230VAC16ms/115VAC at full load 50ms/230VAC16ms/115VAC at full load50ms/230VAC16ms/115VAC at full load VOLTAGE RANGE Note.4 90 ~ 264VAC127 ~ 370VDC VOLTAGE RANGE Note.4 90 ~ 264VAC127 ~ 370VDCVOLTAGE RANGE Note.4 90 ~ 264VAC127 ~ 370VDC INPUT INPUTINPUT FREQUENCY RANGE EFFICIENCY (Typ.) AC CURRENT (Typ.) FREQUENCY RANGE EFFICIENCY (Typ.) AC CURRENT (Typ.)FREQUENCY RANGE EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) INRUSH CURRENT (Typ.)INRUSH CURRENT (Typ.) MAX. No. of the power systems on the 16A CIRCUIT BREAKER MAX. No. of the power systems on the 16A CIRCUIT BREAKERMAX. No. of the power systems on the 16A CIRCUIT BREAKER THE LEAKAGE CURRENT THE LEAKAGE CURRENTTHE LEAKAGE OF CURRENTOVER CURRENT MORE CURRENTMORE CURRENT 47 ~ 63Hz 47 ~ 63Hz47 ~ 63Hz 82%85%86%87%87% 88% 82%85%86%87%87% 88%82%85%86%87%87% 88% 1.2 A/115VAC 0.7 A/230VAC 1.2 A/115VAC 0.7 A/230VAC1.2 A/115VAC 0.7 A/230VAC COLD start 60A(twidth=600 measured at 50% Ipeak) at 230VAC COLD start 60A(twidth=600 measured at 50% Ipeak) at 230VACCOLD start 60A(twidth=600 measured at 50% Ipeak) at 230VAC3 units (circuit breaker type B) / 5 units (circuit breaker type C) 230VAC 3 units (circuit breaker type B) / 5 units (circuit breaker type C) 230VAC3 units (circuit breaker type B) / 5 units (circuit breaker type C) in 230VAC0.25mA / 240VAC 0.25 mA / 240VAC0.25 mA / 240VAC 95 ~ 110% 95 ~ 110%95 ~ 110% Protection type : Constant current limiting, recovers automatically after fault condition is removed Protection type : Constant current limiting, recovers automatically after fault condition is removedProtection type : Constant current limiting, recovers automatically after fault condition is removed PROTECTION PROTECTIONPROTECTION 11 ~ 13.5 V 11 ~ 13.5 V11 ~ 13.5 V 13.8 ~ 16V 13.8 ~ 16V13.8 ~ 16V 17.5 ~ 21V 28 ~ 32V 31 ~ 37V54 ~ 60V 17.5 ~ 21V 28 ~ 32V 31 ~ 37V54 ~ 60V17.5 ~ 21V 28 ~ 32V 31 ~ 37V54 ~ 60V OVER VOLTAGE OVER VOLTAGEOVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover Protection type : Shut down o/p voltage, re-power on to recoverProtection type : Shut down o/p voltage, re-power on to recover The FUNCTION DIMMING CONTROL (OPTIONAL)1 ~ 10VDC or PWM signal : 100Hz ~ 3KHz The FUNCTION DIMMING CONTROL (OPTIONAL)1 ~ 10VDC or PWM signal : 100Hz ~ 3KHzThe FUNCTION DIMMING CONTROL (OPTIONAL)1 ~ 10VDC or PWM signal : 100Hz ~ 3KHzENVIRONMENT ENVIRONMENTENVIRONMENT SAFETY AND EMC SAFETY AND EMCSECURITY AND EMCOTHERS OTHEROTHER WORKING TEMP. OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION WORKING TEMP. OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATIONWORKING TEMP. OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION SAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSIONSAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF DIMENSION EMC IMMUNITY MTBF DIMENSIONEMC IMMUNITY MTBF DIMENSION PACKAGING PACKAGINGPACKAGING -20 ~ +60 (Refer to "Reduction Curve") -20 ~ +60 (Refer to "Reduction Curve")-20 ~ +60 (Refer to "Reduction Curve") 20 ~ 90% RH non-condensing 20 ~ 90% RH non-condensing20 ~ 90% RH non-condensing -40 ~ +80, 10 ~ 95% RH -40 ~ +80, 10 ~ 95% RH-40 ~ +80, 10 ~ 95% RH 0.03%/ (0 ~ 50) 0.03%/ (0 ~ 50)0.03%/ (0 ~ 50) 10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes 10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes UL1310, CAN/CSA C22.2 No. 223-M91(except for 48V), IP64 approved ; design refer to TUV EN60950-1 UL1310, CAN/CSA C22.2 No. 223-M91(except for 48V), IP64 approved ; design refer to TUV EN60950-1UL1310, CAN/CSA C22.2 No. 223-M91(except for 48V), IP64 approved ; design refer to TUV EN60950-1 I/P-O/P:3KVAC I/P-O/P:3KVACI/P-O/P:3KVAC I/P-O/P:>100m Ohms / 500VDC / 25/ 70% RH I/P-O/P:>100m Ohms / 500VDC / 25/ 70% RHI/P-O/P:>100m Ohms / 500VDC / 25/ 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2 Class a, EN61000-3-3 Compliance to EN55022 (CISPR22) Class B, EN61000-3-2 Class a, EN61000-3-3Compliance to EN55022 (CISPR22) Class B, EN61000-3-2 Class a, EN61000-3-3 Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level,criteria A Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level,criteria ACompliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level,criteria A 603Khrs min.MIL-HDBK-217F (25) 603Khrs min.MIL-HDBK-217F (25)603Khrs min.MIL-HDBK-217F (25) 181*61.5*35 mm (L*W*H) 181*61.5*35 mm (L*W*H)181*61.5*35 mm (L*W*H) 0.4 Kg; 24pcs/11Kg/0.75 CUFT 0.4 Kg; 24pcs/11Kg/0.75 CUFT0.4 Kg; 24pcs/11Kg/0.75 CUFTNOTE NOTENOTE 1. All the parameters are NOT speciallymentioned are measured at 230vac input, ratedload and 25 of ambient temperature. 1. All the parameters are NOT speciallymentioned are measured at 230vac input, ratedload and 25 of ambient temperature.1. All the parameters are NOT speciallymentioned are measured at 230vac input, ratedload and 25 of ambient temperature. 2. Curly and noiseare measured at 20 mhz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 2. Curly and noiseare measured at 20 mhz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.2. Curly and noiseare measured at 20 mhz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 3. Tolerance : includes setup tolerance, line regulation and load regulation. 3. Tolerance : includes setup tolerance, line regulation and load regulation.3. Tolerance : includes setup tolerance, line regulation and load regulation. 4. Deratingmay be necessary underlow of the input voltage.Please checkthe static characteristics for more details. 4. Deratingmay be necessary underlow of the input voltage.Please checkthe static characteristics for more details.4. Deratingmay be necessary underlow of the input voltage.Please checkthe static characteristics for more details. 5. The supply is considered a component which will be operated in combination with final equipment. SinceEMC the performance will be affected by the complete installation,the final equipment manufacturers must re-qualify EMC Directive on the complete installationagain. 5. The supply is considered a component which will be operated in combination with final equipment. SinceEMC the performance will be affected by the complete installation,the final equipment manufacturers must re-qualify EMC Directive on the complete installationagain.5. The supply is considered a component which will be operated in combination with final equipment. SinceEMC the performance will be affected by the complete installation,the final equipment manufacturers must re-qualify EMC Directive on the complete installationagain. 6. Lengthof installation time is measured at first cold start.Turn on/OFF the supply can lead to the increase of the setup time. 6. Lengthof installation time is measured at first cold start.Turn on/OFF the supply can lead to the increase of the setup time.6. Lengthof installation time is measured at first cold start.Turn on/OFF the supply can lead to the increase of the setup time. 7. Outputvoltagecanbe adjusted through SVR1 on the PCB ; limit of output constant currentlevel can be adjusted through the SVR2 on the PCB. 7. Outputvoltagecanbe adjusted through SVR1 on the PCB ; limit of output constant currentlevel can be adjusted through the SVR2 on the PCB.7. Outputvoltagecanbe adjusted through SVR1 on the PCB ; limit of output constant currentlevel can be adjusted through the SVR2 on the PCB. 8. Constant currentoperation region is within the specified output voltagerange up. This is the suitable operation region for LED related applications. s. The unit may not be suitable for lighting applications in EU countries. Please checkwith the local authorities for the possible use of the unit. 8. Constant currentoperation region is within the specified output voltagerange up. This is the suitable operation region for LED related applications. s. The unit may not be suitable for lighting applications in EU countries. Please checkwith the local authorities for the possible use of the unit.8. Constant currentoperation region is within the specified output voltagerange up. This is the suitable operation region for LED related applications. s. The unit may not be suitable for lighting applications in EU countries. Please checkwith the local authorities for the possible use of the unit.File name:ELN-60-SPEC2015-05-28 File name:ELN-60-SPEC2015-05-28File name:ELN-60-SPEC2015-05-28