ELN-60-27

60W Single Output Class 2 Switching Power Supply 60W Single Output Class 2 Switching Power Supply60W Single Output Class 2 Switching Power Supply ELN-60series ELN-60seriesELN-60seriesFeatures : Features :Features : UniversalAC input / Full range UniversalAC input / Full rangeUniversalAC input / Full range Protections: Short circuit / Over current/ Over voltage Protections: Short circuit / Over current/ Over voltageProtections: Short circuit / Over current/ Over voltage Cooling by free air convection Cooling by free air convectionCooling by free air convection Built-in constant currentlimiting circuit with adjustable OCP level Built-in constant currentlimiting circuit with adjustable OCP levelBuilt-in constant currentlimiting circuit with adjustable OCP level Optional dimming function : 1>10VDC (D type) or PWM (P type) controlled Optional dimming function : 1>10VDC (D type) or PWM (P type) controlledOptional dimming function : 1>10VDC (D type) or PWM (P type) controlled Fully isolated plastic case with IP64 level Fully isolated plastic case with IP64 levelFully isolated plastic case with IP64 level Classpower unit, no FG Classpower unit, no FGClasspower unit, no FG Class 2 power unit Class 2 power unitClass 2 power unit Pass LPS Pass LPSPass LPS Suitable for LED lighting and moving sign applications (Note.s) Suitable for LED lighting and moving sign applications (Note.s)Suitable for LED lighting and moving sign applications (Note.s) 100% full load burn-in test 100% full load burn-in test100% full load burn-in test Low cost,high reliability Low cost,high reliabilityLow cost,high reliability 2 years warranty 2 years warranty2 years warranty SPECIFICATION SPECIFICATIONSPECIFICATION LPS LPSLPS IP64 IP64IP64( for 48V only) ( except for 48V ) ( for 48V only) ( except for 48V )( for 48V only) ( except for 48V ) MODEL MODELMODEL ELN-60-9 ELN-60-9ELN-60-9 ELN-60-12 ELN-60-12ELN-60-12 ELN-60-15ELN-60-24 ELN-60-27ELN-60-48 ELN-60-15ELN-60-24 ELN-60-27ELN-60-48ELN-60-15ELN-60-24 ELN-60-27ELN-60-48 DC VOLTAGE9V DC VOLTAGE9VDC VOLTAGE9V LED OPERATION VOLTAGE Note.8 3 ~ 9V LED OPERATION VOLTAGE Note.8 3 ~ 9VLED OPERATION VOLTAGE Note.8 3 ~ 9V 12V 12V12V 6 ~ 12V 6 ~ 12V6 ~ 12V 15V 15V15V 7.5 ~ 15V 7.5 ~ 15V7.5 ~ 15V 24V 24V24V 12 ~ 24V 12 ~ 24V12 ~ 24V 27V 27V27V 13.5 ~ 27V 13.5 ~ 27V13.5 ~ 27V 48V 48V48V 24 ~ 48V 24 ~ 48V24 ~ 48V RATED CURRENT5A RATED CURRENT5ARATED CURRENT5A 5A 4A 5A 4A5A 4A 2.5A2.3A 2.5A2.3A2.5A2.3A 1.3A 1.3A1.3A CURRENT RANGE CURRENT RANGECURRENT RANGE 0 ~ 5A 0 ~ 5A0 ~ 5A 0 ~ 5A 0 ~ 5A0 ~ 5A 0 ~ 4A 0 ~ 4A0 ~ 4A 0 ~ 2.5A0 ~ 2.3A 0 ~ 1.3A 0 ~ 2.5A0 ~ 2.3A 0 ~ 1.3A0 ~ 2.5A0 ~ 2.3A 0 ~ 1.3A RATED POWER RATED POWERRATED POWER 45W 45W45W 60W 60W60W 60W 60W62.1W62.5W 60W 60W62.1W62.5W60W 60W62.1W62.5W RIPPLE & NOISE (max.) Note.2120mVp-p RIPPLE & NOISE (max.) Note.2120mVp-pRIPPLE & NOISE (max.) Note.2120mVp-p 8.7 ~ 10.5V 8.7 ~ 10.5V8.7 ~ 10.5V 120mVp-p 120mVp-p120mVp-p 10.8 ~ 13.2V 10.8 ~ 13.2V10.8 ~ 13.2V 150mVp-p 150mVp-p150mVp-p 13.5 ~ 16.5V 13.5 ~ 16.5V13.5 ~ 16.5V 150mVp-p 150mVp-p150mVp-p 21.6 ~ 26.4V 21.6 ~ 26.4V21.6 ~ 26.4V 200mVp-p 200mVp-p200mVp-p 24.3 ~ 29.7V 24.3 ~ 29.7V24.3 ~ 29.7V 250mVp-p 250mVp-p250mVp-p 43.2 ~ 52.8V 43.2 ~ 52.8V43.2 ~ 52.8V OUTPUT VOLTAGE ADJ. RANGE Note.7 OUTPUT VOLTAGE ADJ. RANGE Note.7OUTPUT VOLTAGE ADJ. RANGE Note.7 Can be adjusted by internal potentiometer SVR1 Can be adjusted by internal potentiometer SVR1Can be adjusted by internal potentiometer SVR1 CURRENT ADJ. RANGE Note.7-25% ~ 3%. Can be adjusted by internal potentiometer SVR2 CURRENT ADJ. RANGE Note.7-25% ~ 3%. Can be adjusted by internal potentiometer SVR2CURRENT ADJ. RANGE Note.7-25% ~ 3%. Can be adjusted by internal potentiometer SVR2 VOLTAGE TOLERANCE Note.35.0% VOLTAGE TOLERANCE Note.35.0%VOLTAGE TOLERANCE Note.35.0% LINE REGULATION LOAD REGULATION LINE REGULATION LOAD REGULATIONLINE REGULATION LOAD REGULATION 1.0% 1.0%1.0% 2.0% 2.0%2.0% SETUP, RISE TIME Note.6500ms, 30ms / 230VAC1500ms, 30ms / 115VAC at full load SETUP, RISE TIME Note.6500ms, 30ms / 230VAC1500ms, 30ms / 115VAC at full loadSETUP, RISE TIME Note.6500ms, 30ms / 230VAC1500ms, 30ms / 115VAC at full load HOLD UP TIME (Typ.) HOLD UP TIME (Typ.)HOLD UP TIME (Typ.) 50ms/230VAC16ms/115VAC at full load 50ms/230VAC16ms/115VAC at full load50ms/230VAC16ms/115VAC at full load VOLTAGE RANGE Note.4 90 ~ 264VAC127 ~ 370VDC VOLTAGE RANGE Note.4 90 ~ 264VAC127 ~ 370VDCVOLTAGE RANGE Note.4 90 ~ 264VAC127 ~ 370VDC INPUT INPUTINPUT FREQUENCY RANGE EFFICIENCY (Typ.) AC CURRENT (Typ.) FREQUENCY RANGE EFFICIENCY (Typ.) AC CURRENT (Typ.)FREQUENCY RANGE EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) INRUSH CURRENT (Typ.)INRUSH CURRENT (Typ.) MAX. No. of PSUs on 16A CIRCUIT BREAKER MAX. No. of PSUs on 16A CIRCUIT BREAKERMAX. No. of PSUs on 16A CIRCUIT BREAKER LEAKAGE CURRENT LEAKAGE CURRENTLEAKAGE CURRENTOVER CURRENT OVER CURRENTOVER CURRENT 47 ~ 63Hz 47 ~ 63Hz47 ~ 63Hz 82%85%86%87%87% 88% 82%85%86%87%87% 88%82%85%86%87%87% 88% 1.2A/115VAC 0.7A/230VAC 1.2A/115VAC 0.7A/230VAC1.2A/115VAC 0.7A/230VAC COLD START 60A(twidth=600s measured at 50% Ipeak) at 230VAC COLD START 60A(twidth=600s measured at 50% Ipeak) at 230VACCOLD START 60A(twidth=600s measured at 50% Ipeak) at 230VAC3 units (circuit breaker of type B) / 5 units (circuit breaker of type C) at 230VAC 3 units (circuit breaker of type B) / 5 units (circuit breaker of type C) at 230VAC3 units (circuit breaker of type B) / 5 units (circuit breaker of type C) at 230VAC0.25mA / 240VAC 0.25mA / 240VAC0.25mA / 240VAC 95 ~ 110% 95 ~ 110%95 ~ 110% Protection type : Constant current limiting, recovers automatically after fault condition is removed Protection type : Constant current limiting, recovers automatically after fault condition is removedProtection type : Constant current limiting, recovers automatically after fault condition is removed PROTECTION PROTECTIONPROTECTION 11 ~ 13.5V 11 ~ 13.5V11 ~ 13.5V 13.8 ~ 16V 13.8 ~ 16V13.8 ~ 16V 17.5 ~ 21V 28 ~ 32V 31 ~ 37V54 ~ 60V 17.5 ~ 21V 28 ~ 32V 31 ~ 37V54 ~ 60V17.5 ~ 21V 28 ~ 32V 31 ~ 37V54 ~ 60V OVER VOLTAGE OVER VOLTAGEOVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover Protection type : Shut down o/p voltage, re-power on to recoverProtection type : Shut down o/p voltage, re-power on to recover FUNCTION DIMMING CONTROL (OPTIONAL)1 ~ 10VDC or PWM signal : 100Hz ~ 3KHz FUNCTION DIMMING CONTROL (OPTIONAL)1 ~ 10VDC or PWM signal : 100Hz ~ 3KHzFUNCTION DIMMING CONTROL (OPTIONAL)1 ~ 10VDC or PWM signal : 100Hz ~ 3KHzENVIRONMENT ENVIRONMENTENVIRONMENT SAFETY & EMC SAFETY & EMCSAFETY & EMCOTHERS OTHERSOTHERS WORKING TEMP. WORKING HUMIDITY STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION WORKING TEMP. WORKING HUMIDITY STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATIONWORKING TEMP. WORKING HUMIDITY STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION SAFETY STANDARDS WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSIONSAFETY STANDARDS WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF DIMENSION EMC IMMUNITY MTBF DIMENSIONEMC IMMUNITY MTBF DIMENSION PACKING PACKINGPACKING -20 ~ +60 (Refer to "Derating Curve") -20 ~ +60 (Refer to "Derating Curve")-20 ~ +60 (Refer to "Derating Curve") 20 ~ 90% RH non-condensing 20 ~ 90% RH non-condensing20 ~ 90% RH non-condensing -40 ~ +80, 10 ~ 95% RH -40 ~ +80, 10 ~ 95% RH-40 ~ +80, 10 ~ 95% RH 0.03%/ (0 ~ 50) 0.03%/ (0 ~ 50)0.03%/ (0 ~ 50) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL1310, CAN/CSA C22.2 No. 223-M91(except for 48V), IP64 approved ; design refer to TUV EN60950-1 UL1310, CAN/CSA C22.2 No. 223-M91(except for 48V), IP64 approved ; design refer to TUV EN60950-1UL1310, CAN/CSA C22.2 No. 223-M91(except for 48V), IP64 approved ; design refer to TUV EN60950-1 I/P-O/P:3KVAC I/P-O/P:3KVACI/P-O/P:3KVAC I/P-O/P:>100M Ohms / 500VDC / 25/ 70% RH I/P-O/P:>100M Ohms / 500VDC / 25/ 70% RHI/P-O/P:>100M Ohms / 500VDC / 25/ 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2 Class A, EN61000-3-3 Compliance to EN55022 (CISPR22) Class B, EN61000-3-2 Class A, EN61000-3-3Compliance to EN55022 (CISPR22) Class B, EN61000-3-2 Class A, EN61000-3-3 Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level,criteria A Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level,criteria ACompliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level,criteria A 603Khrs min.MIL-HDBK-217F (25) 603Khrs min.MIL-HDBK-217F (25)603Khrs min.MIL-HDBK-217F (25) 181*61.5*35mm (L*W*H) 181*61.5*35mm (L*W*H)181*61.5*35mm (L*W*H) 0.4Kg; 24pcs/11Kg/0.75CUFT 0.4Kg; 24pcs/11Kg/0.75CUFT0.4Kg; 24pcs/11Kg/0.75CUFTNOTE NOTENOTE 1. All parameters NOT speciallymentioned are measured at 230VAC input, ratedload and 25 of ambient temperature. 1. All parameters NOT speciallymentioned are measured at 230VAC input, ratedload and 25 of ambient temperature.1. All parameters NOT speciallymentioned are measured at 230VAC input, ratedload and 25 of ambient temperature. 2. Ripple & noiseare measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 2. Ripple & noiseare measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.2. Ripple & noiseare measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes setup tolerance, line regulation and load regulation. 3. Tolerance : includes setup tolerance, line regulation and load regulation.3. Tolerance : includes setup tolerance, line regulation and load regulation. 4. Deratingmay be needed underlow input voltage.Please checkthe static characteristics for more details. 4. Deratingmay be needed underlow input voltage.Please checkthe static characteristics for more details.4. Deratingmay be needed underlow input voltage.Please checkthe static characteristics for more details. 5. The powersupply is considered as a component that will be operated in combination with final equipment. SinceEMC performance will be affected by the complete installation,the final equipment manufacturers must re-qualify EMC Directive on the complete installationagain. 5. The powersupply is considered as a component that will be operated in combination with final equipment. SinceEMC performance will be affected by the complete installation,the final equipment manufacturers must re-qualify EMC Directive on the complete installationagain.5. The powersupply is considered as a component that will be operated in combination with final equipment. SinceEMC performance will be affected by the complete installation,the final equipment manufacturers must re-qualify EMC Directive on the complete installationagain. 6. Lengthof setup time is measured at first cold start.Turning ON/OFF the powersupply may lead to increase of the setup time. 6. Lengthof setup time is measured at first cold start.Turning ON/OFF the powersupply may lead to increase of the setup time.6. Lengthof setup time is measured at first cold start.Turning ON/OFF the powersupply may lead to increase of the setup time. 7. Outputvoltagecanbe adjusted throughthe SVR1 on the PCB ; limit of output constant currentlevel canbe adjusted throughthe SVR2 on the PCB. 7. Outputvoltagecanbe adjusted throughthe SVR1 on the PCB ; limit of output constant currentlevel canbe adjusted throughthe SVR2 on the PCB.7. Outputvoltagecanbe adjusted throughthe SVR1 on the PCB ; limit of output constant currentlevel canbe adjusted throughthe SVR2 on the PCB. 8. Constant currentoperation region is within the specified output voltagerange above. This is the suitable operation region for LED related applications. s. The unit might not be suitable for lighting applications in EU countries. Please checkwith your local authorities for the possible useof the unit. 8. Constant currentoperation region is within the specified output voltagerange above. This is the suitable operation region for LED related applications. s. The unit might not be suitable for lighting applications in EU countries. Please checkwith your local authorities for the possible useof the unit.8. Constant currentoperation region is within the specified output voltagerange above. This is the suitable operation region for LED related applications. s. The unit might not be suitable for lighting applications in EU countries. Please checkwith your local authorities for the possible useof the unit.File Name:ELN-60-SPEC2015-05-28 File Name:ELN-60-SPEC2015-05-28File Name:ELN-60-SPEC2015-05-28