F3SP-U3P-TGR

E3FSSafety sensorsSingle-beam safety sensor in compact housingThe slender M18-sized E3FS is a type 2 safety single beam with an operating range of up to 10 m. Plastic and metal housing, cable and M12-connector offer flexibility inapplication together with a control unit such as F3SP-U3P or F3SP-U5P.• Sensing distance up to 10 m•LEDs for easy alignment and diagnosis• Cable and M12 plug categories• Plastic and metal housing• Type 2 sensor complying with EN 61496-1Ordering informationSafety single beam sensors (Type 2)Controller for safety single beam sensorsCase material Operation distanceOrder codeSensors Output contactsWidthOrder codePlastic 0 to 10 mCable type E3FS-10B4Plug type E3FS-10B4-P1Nickel brassCable typeE3FS-10B4-M Plug type E3FS-10B4-M1-M1 to 2Safety single beam sensors1 to 4Safety single beam sensors2 NO 2.5 A22.5 mm F3SP-U3P-TGR45 mmF3SP-U5P-TGRSpecificationsSensorsSensing method Through-beamControllerF3SP-U3P-TGR, F3SP-U5P-TGR Supply voltage (Vs) 24 VDC ± 10% (ripple p-p 10% max.) Effective aperture angle (EAA) ±5° (at 3 m)Current consumption Emitter:50 mA max.Receiver:25 mA max.Sensing distance10 mStandard sensing objectOpaque object: 11 mm min. in diameterResponse time 2.0 ms (E3FS only)Control outputPNP transistor output, load current: 100 mA max.Test input (emitter)21.5 to 24 VDC: Emitter OFF (source current: 3 mA max.)Open or 0 to 2.5V: Emitter ON (leakage current: 0.1 mA max.)Ambient light intensityIncandescent lamp: 3.000 lx max. (light intensity on the receiver surface) Sunlight: 10,000 lx max. (light intensity on the receiver surface)Ambient temperature Operating:-20°C +55°C, storage:-30°C +70°C (with no icing or condensation)Degree of protectionIP67(IEC 60529)Light source Infrared LEDProtectionOutput short-circuit protection, reverse polarity protectionControllersItem F3SP-U3PF3SP-U5PNumber of sensors 1 to 2 safety single beam sensor 1 to 4 safety single beam sensorWidth 22.5 mm45 mm Muting input2 Inputs4 Inputs Safety related functionOverride functionMuting lamp connectionInterlock system (automatic and manual reset)Power supply voltage24 VDC ±10%Power consumption 420 mA max.Output contacts 2 NO 2.5 A (protected by fuse), 115 VAC max. 2 NO 2.5 A (protected by fuse), 250 VAC max.Indicators 6 LED for status and diagnosticsDegree of protectionIP20(IEC 60529)Terminal16 screw terminals, detachable blocks with ’4pin’Response time  30 msAmbient temperature Operation: –10°C +55°CHousing material PlasticDIN rail mounting32 screw terminals, detachable blocks with ’4pin’488