

| パラメータ | 価値 |
|---|---|
| Can only be used in plastic housing | |
| タイプ | COM |
| 幅 | 22.4 mm |
| 身長 | 44.1 mm |
| 長さ | 41.6 mm |
| シリーズ | HC-COM |
| 一般的な | Connectors may be operated only when there is no load/voltage. |
| 応用 | Power/signal |
| 製品タイプ | Contact insert with a fixed no. of positions |
| 定格電流 | 40 A (power contacts) |
| 接触直径 | 4 mm |
| 接触材料 | Copper alloy |
| 連絡先番号 | 1 - 4 (power contacts) |
| 締め付けトルク | 0.5 Nm ... 0.8 Nm (Mounting screws for mounting in the HEAVYCON housing) |
| 接続プロファイル | 4+2+PE |
| 汚染度 | 3 |
| 寸法図 | |
| ポジション数 | 6 |
| 定格サージ電圧 | 6 kV (Phase-phase power contacts) |
| 過電圧カテゴリー | III |
| 組み立て説明書 | To ensure correct use, installation in housing with IP54 protection or better is required |
| 接続技術 | Crimp connection (power contacts) |
| 接触材料の種類 | turned |
| 電源接点数 | 4 |
| 定格電圧(III/3) | 400 V (Phase-ground power contacts) |
| 規格・規制 | PC: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3) |
| 導体断面積 | 1.5 mm² ... 10 mm² (power contacts) |
| 制御コンタクト数 | 2 |
| 接触キャリア材料 | PC |
| 接触面材質 | Ag (alternatively Au) |
| 挿入/離脱サイクル | ≥ 500 |
| 接続断面積AWG | 16 ... 8 (power contacts) |
| 周囲温度(動作) | -40 °C ... 125 °C (including heating up of contacts) |
| 標準に準拠した接続 | IEC / EN |
| 電源接点の定格電圧 | 400/690 V |
| ポジションあたりの接続数 | 1 |
| UL 94準拠の難燃性評価 | V0 |
| 個々の電線の被覆剥き長さ | 9 mm (for 1.5 ... 2.5 mm²) |
| 接触面の材質、電源接点 | Ag |
| 接触面の材質、制御接触 | Ag (alternatively Au) |
技術仕様と性能データ
設置・操作ガイド