在庫あり 注目商品
HLC1CM
HLC1CM HL-C1C-M PANASONIC Driver for connecting 2 sensor heads HL-C1 series
$0.00米ドル
3584 在庫あり
主な仕様
アイテム:Specifications
重さ:Net weight: 300 g approx.
詳細:Controller
製品:Ultra High-speed Laser Displacement Sensor [CCD Style]
サプライヤー情報
PANASONIC
製品: 4316
通常、2〜3営業日以内に出荷します
品質保証済み
高速配送
テクニカルサポート
技術仕様
| パラメータ | 価値 |
|---|---|
| アイテム | Specifications |
| 重さ | Net weight: 300 g approx. |
| 詳細 | Controller |
| 製品 | Ultra High-speed Laser Displacement Sensor [CCD Style] |
| アクセサリー | - |
| 部品番号 | HL-C1C-M |
| アラーム出力 | Photo-MOS relay- Maximum load current: 50 mA- Applied voltage: 30 V DC or less (between alarm output and COM)- ON impedance: 35 Ohm or less- Operation time: Max. 2 ms |
| ケーブル長 | Power line: Less than 10 m 32.808 ftSignal line: Less than 30 m 98.425 ft |
| 製品名 | Ultra High-speed Laser Displacement Sensor HL-C1(Discontinued) |
| サンプリングレート | Selectable from 100 micro s / 144 micro s / 200 micro s / 255 micro s / 332 micro s / 498 micro s / 1,000 micro s |
| ホールド機能 | Selectable from NORMAL / P-P / PEAK / VALLEY(Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface. |
| 製品番号 | HL-C1C-M |
| 供給電圧 | 24 V DC plus or minus 10 % including ripple 0.5 V (P-P) |
| デジタルフィルタ | High pass: OFF, 10 to 2,000 Hz (9 steps)Low pass: OFF, 10 to 2,000 Hz (9 steps)(Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface. |
| インジケーター：暗い | Red LED (lights up upon disabled measurement due to insufficient light at sensor head 1 or 2) |
| ゼロセットON入力 | Zero set: ON when voltage (using input voltage: 12 to 24 V DC, maximum input voltage: 30 V DC) is input |
| 校正：スパン | 0.9000 to 1.1000(Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface. |
| ゼロセットOFF入力 | Zero set: OFF when voltage (using input voltage: 12 to 24 V DC, maximum input voltage: 30 V DC) is input |
| キャリブレーション：シフト | plus or minus 20.0000 mm plus or minus 0.787 in(Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface. |
| 消費電流 | When 1 sensor is connected: 430 mA approx.When 2 sensors are connected: 550 mA approx. |
| インジケーター：明るい | Red LED (lights up upon disabled measurement due to excessive light at sensor head 1 or 2) |
| 計算関数 | L plus or minus KA, L plus or minus KB, L plus or minus K (A plus or minus B)A, B: Sensor head 1, Sensor head 2 measurement values, L = plus or minus 999.9999, K = 0.0001 to 99.9999(Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface. |
| シリアル入出力 | RS-232C |
| センサーヘッドの接続 | Maximum 2 sensor heads |
| アナログ出力：電流 | Output current: 4 to 20 mA/F.S. [default setting when diffuse reflective mode is selected (Note 2)]Output range: 0 to 29.5 mA (maximum of 25 mA at max. load impedance)Load impedance: 250 Ohm or less(Note 1) The maximum analog output current will vary with load impedance.(Note 2) If specular reflective mode is selected, then the default setting is 5.6 to 18.4 mA/F.S. |
| アナログ出力：電圧 | Output voltage: plus or minus 5 V/F.S. [default setting when diffuse reflective mode is selected (Note) ]Output range: -10.9 to +10.9 VOutput current: Max. 2 mA, Output impedance: 50 Ohm(Note) If specular reflective mode is selected, then the default setting is plus or minus 4 V/F.S. |
| 平均サンプル数 | OFF, 2 to 32,768 times (16 steps)(Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface. |
| 判定出力（O1、O2） | Photo-MOS relay- Maximum load current: 50 mA- Applied voltage: 30 V DC or less (between judgment output and COM)- ON impedance: 35 Ohm or less- Operation time: Max. 2 ms |
| インジケーター：レーザー放射 | Green LED (lights up during laser emission from sensor head 1 or sensor head 2, or immediately before laser emission) |
| 温度特性 | plus or minus 0.01 % F.S./degrees |
| タイミング入力（レーザー発光） | Laser emission stops or continues when voltage (using input voltage: 12 to 24 V DC, maximum input voltage: 30 V DC) is input or there is an open circuit: determined based on input mode selection. |
| 警報出力：出力動作 | Opened when the amount of light is excessive or insufficient. |
| 警報出力：短絡保護 | Incorporated |
| 耐環境性：周囲湿度 | 35 to 85 % RH, Storage: 35 to 85 % RH |
| 耐環境性：耐衝撃性 | 196 m/s2 (20 G approx.) in X, Y and Z directions for 3 times each |
| 判定出力（O1、O2）：出力動作 | Opened or closed when the threshold value is reached. Determined based on judgment output mode selection. (The threshold value varies with the hysteresis setting.) |
| 耐環境性：周囲温度 | 0 to +50 degrees +32 to +122 degrees Fahrenheit (No dew condensation), Storage: -20 to +70 degrees -4 to +158 degrees Fahrenheit |
| 耐環境性：耐振動性 | 10 to 55 Hz frequency (period: 1 min.) 0.75 mm 0.030 in amplitude in X,Y and Z directions for 30 min. each |
| 判定出力（O1、O2）：利用カテゴリー | DC-12 or DC-13 |
| 判定出力（O1、O2）：短絡保護 | Incorporated |
製品説明
More details
主な機能
- 産業グレードの品質
- RoHS準拠
- CE認証取得
- 1年保証
製品資料
データシート
技術仕様と性能データ
ユーザーマニュアル
設置・操作ガイド
