HRP-300-3.3

300W Single Output with the Function of PFC 300W Single Output with the Function of PFC300W Single Output with the Function of PFC HRP-300series HRP-300seriesHRP-300series Features : Features :Features : Universal AC input / Full range Universal AC input / Full rangeUniversal AC input / Full range Built-in active PFC function,PF>0.95 Built-in active PFC function,PF>0.95Built-in active PFC function,PF>0.95 High efficiency, up to 89% High efficiency, up to 89%High efficiency, up to 89% Withstand 300VAC surge input for 5 seconds Withstand 300VAC surge input for 5 secondsWithstand 300VAC surge input for 5 seconds Protections: short circuit / Overload / Over voltage / Over temperature Protections: short circuit / Overload / Over voltage / Over temperatureProtections: short circuit / Overload / Over voltage / Over temperature Built-in limiting circuit of constant current Built-in limiting circuit of constant currentBuilt-in limiting circuit of constant current 1U low profile 41mm 1U low profile 41mm1U low profile 41mm Built-in cooling fan ON-OFF control Built-in cooling fan ON-OFF controlBuilt-in cooling fan ON-OFF control Built-in DC OK signal Built-in DC OK signalBuilt-in DC OK signal Built-in remote sense function Built-in remote sense functionBuilt-in remote sense function 5 years warranty 5 years warranty5 years warrantyBauar t gepr u f t Bauar t gepr u f tBauar t gepr u f t Sicherheit egel ma ge Sicherheit egel ma geSicherheit egel ma ge od or s od or sod or s be wacg be wacgbe wacg SPECIFICATION SPECIFICATIONSPECIFICATION MODEL MODELMODEL DC VOLTAGE RATED CURRENT RANGE RATED POWER DC VOLTAGE RATED CURRENT RANGE RATED POWERDC VOLTAGE RATED CURRENT RANGE RATED POWER www. tuv. com www. tuv. comwww. tuv. com ID 2000000000 ID 2000000000ID 2000000000HRP-300-3.3 HRP-300-5HRP-300-7.5 HRP-300-12HRP-300-15HRP-300-24HRP-300-36HRP-300-48 HRP-300-3.3 HRP-300-5HRP-300-7.5 HRP-300-12HRP-300-15HRP-300-24HRP-300-36HRP-300-48HRP-300-3.3 HRP-300-5HRP-300-7.5 HRP-300-12HRP-300-15HRP-300-24HRP-300-36HRP-300-48 3.3 V 5V 7.5 V 12V15V24V36V48V 3.3 V 5V 7.5 V 12V15V24V36V48V3.3 V 5V 7.5 V 12V15V24V36V48V 60A 60A40A27A22A14A9A 7A 60A 60A40A27A22A14A9A 7A60A 60A40A27A22A14A9A 7A 0 ~ 60A0 ~ 60A0 ~ 40A0 ~ 27A0 ~ 22A0 ~ 14A0 ~ 9A0 ~ 7A 0 ~ 60A0 ~ 60A0 ~ 40A0 ~ 27A0 ~ 22A0 ~ 14A0 ~ 9A0 ~ 7A0 ~ 60A0 ~ 60A0 ~ 40A0 ~ 27A0 ~ 22A0 ~ 14A0 ~ 9A0 ~ 7A 198W 300W 300W 324W 330W 336W 324W 336W 198W 300W 300W 324W 330W 336W 324W 336W198W 300W 300W 324W 330W 336W 324W 336W RIPPLE & NOISE (max.) Note.280mVp-p90mVp-p100mVp-p120mVp-p150mVp-p150mVp-p250mVp-p250mVp-p RIPPLE & NOISE (max.) Note.280mVp-p90mVp-p100mVp-p120mVp-p150mVp-p150mVp-p250mVp-p250mVp-pRIPPLE & NOISE (max.) Note.280mVp-p90mVp-p100mVp-p120mVp-p150mVp-p150mVp-p250mVp-p250mVp-p OUTPUT VOLTAGE ADJ. RANGE of OUTPUT VOLTAGE ADJ. RANGE ofOUTPUT VOLTAGE ADJ. RANGE of 2.8 ~ 3.8V4.3 ~ 5.8V6.8 ~ 9V 10.2 ~ 13.8V13.5 ~ 18V 21.6 ~ 28.8V28.8 ~ 39.6V40.8 ~ 55.2 V 2.8 ~ 3.8V4.3 ~ 5.8V6.8 ~ 9V 10.2 ~ 13.8V13.5 ~ 18V 21.6 ~ 28.8V28.8 ~ 39.6V40.8 ~ 55.2 V2.8 ~ 3.8V4.3 ~ 5.8V6.8 ~ 9V 10.2 ~ 13.8V13.5 ~ 18V 21.6 ~ 28.8V28.8 ~ 39.6V40.8 ~ 55.2 V VOLTAGE TOLERANCE Note.32.5%2.0%2.0%1.0%1.0%1.0%1.0%1.0% VOLTAGE TOLERANCE Note.32.5%2.0%2.0%1.0%1.0%1.0%1.0%1.0%VOLTAGE TOLERANCE Note.32.5%2.0%2.0%1.0%1.0%1.0%1.0%1.0% LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD TIME (Typ.) LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD TIME (Typ.)LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD TIME (Typ.) 0.5%0.5%0.5%0.3%0.3%0.2%0.2%0.2% 0.5%0.5%0.5%0.3%0.3%0.2%0.2%0.2%0.5%0.5%0.5%0.3%0.3%0.2%0.2%0.2% 1.0%1.0%1.0%0.5%0.5%0.5%0.5%0.5% 1.0%1.0%1.0%0.5%0.5%0.5%0.5%0.5%1.0%1.0%1.0%0.5%0.5%0.5%0.5%0.5% 1000ms, 50ms/230VAC 2500ms, 50ms/115VAC at full load 1000ms, 50ms/230VAC 2500ms, 50ms/115VAC at full load1000ms, 50ms/230VAC 2500ms, 50ms/115VAC at full load 16ms/230VAC16ms/115VAC at full load 16ms/230VAC16ms/115VAC at full load16ms/230VAC16ms/115VAC at full load VOLTAGE RANGE Note.5 85 ~ 264VAC120 ~ 370VDC VOLTAGE RANGE Note.5 85 ~ 264VAC120 ~ 370VDCVOLTAGE RANGE Note.5 85 ~ 264VAC120 ~ 370VDCINPUT INPUTINPUT FREQUENCY RANGE POWER FACTOR (Typ.) EFFICIENCY (Typ.) FREQUENCY RANGE POWER FACTOR (Typ.) EFFICIENCY (Typ.)FREQUENCY RANGE POWER FACTOR (Typ.) EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) THE LEAKAGE CURRENT AC CURRENT (Typ.) INRUSH CURRENT (Typ.) THE LEAKAGE CURRENTAC CURRENT (Typ.) INRUSH CURRENT (Typ.) THE LEAKAGE OF CURRENTOVERLOAD The OVERHEAD ofThe OVERHEAD of 47 ~ 63Hz 47 ~ 63Hz47 ~ 63Hz PF>0.95/230VAC PF>0.99/115VAC at full load PF>0.95/230VAC PF>0.99/115VAC at full loadPF>0.95/230VAC PF>0.99/115VAC at full load 80%82%86%88%88%87%88%89% 80%82%86%88%88%87%88%89%80%82%86%88%88%87%88%89% 3.5 A/115VAC1.8A/230VAC 3.5 A/115VAC1.8A/230VAC3.5 A/115VAC1.8A/230VAC 35A/115VAC70A/230VAC 35A/115VAC70A/230VAC35A/115VAC70A/230VAC <1.2 mA / 240VAC <1.2 mA / 240VAC<1.2 mA / 240VAC 105 ~ 135% rated output power 105 ~ 135% rated output power105 ~ 135% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed Protection type : Constant current limiting, recovers automatically after fault condition is removedProtection type : Constant current limiting, recovers automatically after fault condition is removed PROTECTION PROTECTIONPROTECTIONOVER VOLTAGE OVER VOLTAGEOVER VOLTAGE 3.96 ~ V 4.62 3.96 ~ V 4.623.96 ~ V 4.62 6 ~ 7V9.4 ~ 10.9V14.4 ~ 16.8V18.8 ~ 21.8V30 ~ 34.8 V 41.4 ~ 48.6V57.6 ~ 67.2 V 6 ~ 7V9.4 ~ 10.9V14.4 ~ 16.8V18.8 ~ 21.8V30 ~ 34.8 V 41.4 ~ 48.6V57.6 ~ 67.2 V6 ~ 7V9.4 ~ 10.9V14.4 ~ 16.8V18.8 ~ 21.8V30 ~ 34.8 V 41.4 ~ 48.6V57.6 ~ 67.2 VOVER TEMPERATURE THE EXCESS OF TEMPERATURETHE EXCESS OF TEMPERATURE Protection type : Shut down o/p voltage, re-power on to recover Protection type : Shut down o/p voltage, re-power on to recoverProtection type : Shut down o/p voltage, re-power on to recover Shut down o/p voltage, recovers automatically after temperature goes down Shut down o/p voltage, recovers automatically after temperature goes downShut down o/p voltage, recovers automatically after temperature goes downFUNCTION The FUNCTIONThe FUNCTION DC OK SIGNAL the power supply to turn on : 3.3 ~ 5.6 V ; psu turns off : 0 ~ 1V DC OK SIGNAL the power supply to turn on : 3.3 ~ 5.6 V ; psu turns off : 0 ~ 1VDC OK SIGNAL the power supply to turn on : 3.3 ~ 5.6 V ; psu turns off : 0 ~ 1V FAN CONTROL (Typ.)Load 3515% or RTH250c Fan FAN CONTROL (Typ.)Load 3515% or RTH250c FanFAN CONTROL (Typ.)Load 3515% or RTH250c Fan onENVIRONMENT ENVIRONMENTENVIRONMENT SAFETY AND EMC SAFETY AND EMCSAFETY AND EMC (Note 4) (Note 4)(Note 4)OTHER OTHEROTHER WORKING TEMP. OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION WORKING TEMP. OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATIONWORKING TEMP. OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION SAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSIONSAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF DIMENSION EMC IMMUNITY MTBF DIMENSIONEMC IMMUNITY MTBF DIMENSION PACKAGING PACKAGINGPACKAGING -40 ~ +70c (Refer to "Reduction Curve") -40 ~ +70c (Refer to "Reduction Curve")-40 ~ +70c (Refer to "Reduction Curve") 20 ~ 90% RH non-condensing 20 ~ 90% RH non-condensing20 ~ 90% RH non-condensing -40 ~ +85℃, 10 ~ 95% RH -40 ~ +85℃, 10 ~ 95% RH-40 ~ +85℃, 10 ~ 95% RH 0.03%/ c (0 ~ 50 ° c ) 0.03%/ c (0 ~ 50 ° c )0.03%/ c (0 ~ 50 ° c ) 10 ~ 500 hz, 5 G, 10 min./1cycle, 60min. each along X, y, Z axes 10 ~ 500 hz, 5 G, 10 min./1cycle, 60min. each along X, y, Z axes10 ~ 500 hz, 5 G, 10 min./1cycle, 60min. each along X, y, Z axes UL60950-1, TUV EN60950-1 approved UL60950-1, TUV EN60950-1 approvedUL60950-1, TUV EN60950-1 approved I/P-O/P:3KVAC I/P-FG:2KVACO/P-FG:0.5 KVAC I/P-O/P:3KVAC I/P-FG:2KVACO/P-FG:0.5 KVACI/P-O/P:3KVAC I/P-FG:2KVACO/P-FG:0.5 KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25c / 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25c / 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25c / 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2, heavy industry level, criteria Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2, heavy industry level, criteriaCompliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2, heavy industry level, criteria 176K hrs min.MIL-HDBK-217F (25c ) 176K hrs min.MIL-HDBK-217F (25c )176K hrs min.MIL-HDBK-217F (25c ) 199*105*41 mm (L*W*H) 199*105*41 mm (L*W*H)199*105*41 mm (L*W*H) 0.95 Kg;15pcs/15.3 Kg/0.69 CUFT 0.95 Kg;15pcs/15.3 Kg/0.69 CUFT0.95 Kg;15pcs/15.3 Kg/0.69 CUFTNOTE NOTENOTE 1. All parameters NOT specially mentioned are measured at 230vac input, ratedload and 25 ° c ambient temperature. 1. All parameters NOT specially mentioned are measured at 230vac input, ratedload and 25 ° c ambient temperature.1. All parameters NOT specially mentioned are measured at 230vac input, ratedload and 25 ° c ambient temperature. 2. Curly and noiseare measured at 20 mhz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 2. Curly and noiseare measured at 20 mhz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.2. Curly and noiseare measured at 20 mhz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 3. Tolerance : includes set up tolerance, line regulation and load regulation.3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For information on how to perform these EMC tests, please refer to EMI testingof component powersupplies. EMC directives. For information on how to perform these EMC tests, please refer to EMI testingof component powersupplies.EMC directives. For information on how to perform these EMC tests, please refer to EMI testingof component powersupplies. (asavailable in http://www.meanwell.com) (asavailable in http://www.meanwell.com)(asavailable in http://www.meanwell.com) 5. Deratingmay be necessary underlow input voltages. Please checkthe of the curve of reduction of power for more details. 5. Deratingmay be necessary underlow input voltages. Please checkthe of the curve of reduction of power for more details.5. Deratingmay be necessary underlow input voltages. Please checkthe of the curve of reduction of power for more details.File name:HRP-300-SPEC2015-07-06 File name:HRP-300-SPEC2015-07-06File name:HRP-300-SPEC2015-07-06