LCM-25

技術仕様

パラメータ	価値
名前	LCM-25
力	18,9 W
州	Recommended Model
ストック	Yes
形式	Box
シリーズ	LCM-25
調光	0-10V, 1-10V, Resistance 0-100K, PWM Signal 10V
承認	CCC, CE, ENEC, UL
電力（W）	25,50
サブフォーマット	IP20
幅（mm）	68.00
高さ（mm）	23.00
AC入力最大	277,00
AC入力最小	180,00
アプリケーション	Lighting
メーカー	MEAN WELL
製品タイプ	LED Driver
隔離（V）	3.750,00
出力電流	350mA
ピーク電力（W）	25.2
入力コネクタ	Quick Connector
入力周波数	50 Hz, 60 Hz
長文/背景	105.00
長い説明	LED driver dimmable.Specially designed for powering LEDs directly in a steady stream.Format in plastic boxIP20.Input range180-277Vca47-63Hz.Current output selectable by micro-switch350, 500, 600, 700, 900 or 1050mA.Output current350mA500mA600mA700mA900mA1050mAPower18,9 W25,2 W25,2 W25,2 W25,2 W25,2 WRange of Output Voltage6-54Vcc6-50Vcc6-42Vcc6-36Vcc6-28Vcc6-24vdcEfficiency typical:86%.Regulation0% to 100% of the output intensity with a slider0-10V or 1-10V, a PWM signal of 10V with a frequency of 100Hz to 3KHz or resistance of 0 to 100K Ohms. With the regulation we can turn off the output, but we need a regulator 0-10V. Regulators 1-10V not arrive to give 0V, do not shut down the output.Synchronization: we can sync up10 unitsvia the wires LCM-xxx-SYNC25 in such a way that by regulating a source other do the same regulation without the need to be connected to the regulator 1-10/0-10V.Input class II without grounding.Factor corrector, power>0.94to 230vac at full load.Consumption without load <0.5 W.Operating temperature range of caseTcfrom-30ºCup+85ºC.Dimensions (Length x Width x Height):105 x 68 x 23mm.3 years of warranty.Manufacturer: MEAN WELL.This source is designed to work directly with leds (plates LED or COBs), not with LED strips. Must be equipment that is fed in a steady stream.This source works on a Constant Current when we connect the LEDs directly to have a voltage within the Range of Output Voltage mode Constant Current and a working current equal to the output current.Be sure to adjust the output current desired using the selector current. For more information please see the datasheet in the section attachments.With plastic housing, designed for applications of LED lighting and architectural. Suitable for indoor lighting, offices, LED panels.Low ripple current, no flicker (flicker-free).Can be adjusted by regulatory assets or liabilities0-10Vor1-10V, signal 10V PWM of 100Hz to 3KHz or by resistance of 0 to 100KOhmios. Does not work with dimmers Triac dimmer cutting phase.(Not to be confused with regulators TRIACs, cutting phase. This driver cannot be regular with a Triac).With potentiometers assets that you can give 0V to shut down the output without the need of a switch. Dimmers 1-10V we can only reach 10% of regulation without shutting down the output.Compatible with any regulator 0-10V or 1-10V-market both assets and liabilities. Some compatible models tested are:MEAN WELL DAP-04S01 (compatible with any push button normally open).SIMON: 75317BJC: 5TC8 425LEGRAND: 0784 04ABB- "NIESSEN": N2260.9SIEMENS: 5TC8424EFAPEL: Model 21210LED BOX: Model LD1160188OSRAM: Model DIM MCUJUNG: Model 240-10We can put about 20 sources for each regulator. The maximum distance is 100 meters between the regulator and the driver.
出力コネクタ	Quick Connector
入国の種類 CA	Single-phase
保証期間（年）	3,00
原産国	China
出力電流 mA	350, 400, 450, 500, 550, 600, 650, 700, 750, 800, 850, 900, 950, 1000, 1050
出力電圧範囲	6-54Vcc
最小出力強度（mA）	350,00
出力最大強度（mA）	1.050,00

製品説明

More details

主な機能

産業グレードの品質
RoHS準拠
CE認証取得
1年保証

技術的詳細

LED driver dimmable.

製品資料

データシート

技術仕様と性能データ

ユーザーマニュアル

設置・操作ガイド