

| パラメータ | 価値 |
|---|---|
| • WARNING: Serve only products in perfect condition. Products should be checked regularly for damage. Remove defective products immediately. Replace damaged products. It is not possible to repair them. | |
| 一般的な | Look at the rating curve. |
| 高度 | 2000 m |
| ロックタイプ | for ONECLICK and standard quick lock |
| プラグフェイス | 16+3 |
| 観察 | In the case of connection cross-section max. |
| プラグサイクル | 100 |
| ねじの種類 | M23 |
| 応用 | Signal |
| 成文化 | N |
| 製品タイプ | Circular connector (cable side) |
| 安全に関する注意事項 | WARNING: Connectors should not be plugged in or unplugged under load. Failure to comply and improper use can result in property damage and personal injury. |
| シェル素材 | GD-Zn |
| サージカテゴリー | Ii |
| 接続タイプ | Welding connection |
| ガスケット材質 | FKM |
| 取り付け高さ | 2000 m |
| 公称電圧 | 150 V |
| 極数 | 19 |
| Pgケーブルグランド | without |
| 汚染度 | 3 |
| ケーブル外径 | 9 mm ... 15 mm |
| 回転方向 | Standard |
| 恒久的な温度 | 125 °C (DIN EN 60512-9-2 / 1000 h) |
| 接点スイッチングタイプ | Female |
| 材質:絶縁体 | AP 6.6 |
| 保護インデックス(挿入) | IP66 / IP68 (2 m / 24 h) |
| 定格電流電源接点 | 10 A |
| 周囲温度(サービス) | -40 °C ... 105 °C (see derating) |
| コンタクト径パワーコンタクト | 1.5 mm |
| 過渡電圧の寸法決定 | 1.5 kV |
| 連絡先直径信号連絡先 | 1 mm |
| 公称電圧警告接点 | 150 V |
| 信号接点あたりの公称電流 | 8 A |
| 編組糸部パワーコンタクト最大。 | 1 mm² |
| 編組糸セクション電力接点最小。 | 0.08 mm² |
| 編組糸セクション信号接点最大。 | 1 mm² |
| 編組糸セクション信号接点分。 | 0.08 mm² |
技術仕様と性能データ
設置・操作ガイド