MCDS18125-316

技術仕様

パラメータ	価値
機能名	Feature Value
深さ（EF000049）	None mm
幅 (EF000008)	None mm
カラー (EF000007)
高さ（EF000040）	None mm
利点: (機能)	Large enclosure configurations can be created and installed in areas where there is limited access space. The enclosure's doors can support heavy loads, such as, cooling units, due to its increased loading capability. Component failure and unnecessary downtime is avoided as water and dust are prevented from entering the enclosure. Stainless steel enclosures can be installed in almost any environment, grade dependent.
コメント: (特徴)	Stainless steel side panels, SPMS, need to be ordered separately, to close individual enclosures and enclosure assembly's, to ensure the stated protection degree is achieved.
機能: (機能)	Stainless steel 304 and 316(L) double door combinable floor standing enclosures, with a IP 55 protection degree.
材質（EF002169）
連結可能（EF001229）
利点: (特徴)	A flexible solution that allows customers to create enclosure configurations made up of smaller individual enclosures. The space required immediately in front of the enclosure is reduced due to the width of each enclosure door being half that of the enclosure. This also results in the door's loading capacity being higher, as it is split over two doors. The installed components inside the enclosure will be safe and secure due to the high protection degree.
RAL番号（EF000116）
ドア: (技術データ)	Mounted with four hinges. Including door frame with 25 mm hole pattern. Doors cannot be reversed. Separate doors to be ordered for left hand door locking.
EMCバージョン（EF001062）
ロック: (技術データ)	Espagnolette 4-point locking system in the main door and 2-point locking system in the slave door. Standard double-bit lock with 3 mm insert. Standard inserts, cylinders, lift handles and T-handle are available as accessories.
コーナーモデル（EF020814）
フレーム: (技術データ)	Seam welded reversed open profiles with 25 mm hole pattern, according to DIN 43660.
自立型（EF020363）
傾斜屋根（EF009278）
仕上げ: (技術データ)	400 pre-grained stainless steel.
ポール固定具（EF009582）
リアドア付き（EF007381）
配送：（技術データ）	Frame with fitted doors, rear panel, roof panel, bottom plates, mounting plate and door frame. Delivery also includes earthing bolts. Delivered on a pallet which is identical to the width of the enclosure to allow baying without removal. Packing material is recyclable.
アース: (技術データ)	All panels are earthed through their fittings and are equipped with a separate earthing stud.
衝撃強度（EF004293）
材質: (技術データ)	AISI 304L pre-grained stainless steel / AISI 316L. Frame: 1.5 mm. Door: 2 mm. Rear, roof and side panels: 1.5 mm. Bottom plates: 1.5 mm stainless steel. Mounting plate: 3 mm galvanized steel.
ドアの数（EF000122）
ロックの数（EF000123）
素材の品質（EF001257）
ガラスドア付き（EF001089）
保護: (技術データ)	Complies with IP 55 TYPE 12, 13 IK 10.
背面パネル: (技術データ)	Fitted by M6 torx screws. Standard facilities for rear door mounting. Split rear panels in 1600 mm wide enclosures.
ルーフパネル：（技術データ）	Removable.
表面仕上げ（EF006569）
サイドパネル: (技術データ)	Supplied as an accessory.
取り付けプレート付き（EF000118）
底板：（技術データ）	Two piece bottom plate in 1200 mm width, with injected polyurethane gasket to ensure maximum sealing.
中間マウント（EF022994）
取り付けプレート: (技術データ)	Double folded and adjustable in depth by steps of 25 mm, with the MPD02 accessory. Mounting plate is delivered, attached on the outside of the enclosure packaging.
換気扉付き（EF006279）
保護等級（IP）（EF005474）
床置き壁掛けモデル（EF015208）
壁埋め込み型（EF007536）
壁掛け対応（EF000664）
保護等級（NEMA）（EF011959）
取り付け要件: (技術データ)	Standard delivery ready for combined installation. For stand-alone installation, add side panels.
メートル法の取り付けに適しています（EF005823）
奥行き調節可能な取り付けプレート（EF006054）
IEC 62208（EF014988）に準拠したドアの最大許容荷重	None N
IEC 62208（EF014987）に準拠した筐体の最大許容荷重	None N
IEC/TR 60890（EF014986）に準拠した熱放散（デルタT = 20 K）	None W
IEC 62208（EF014989）に準拠した取り付けプレートの最大許容荷重	None N

製品説明

Self-supporting, 1800x1200x500, combinable, 2-door, with MP, stainless steel 316, IP55

主な機能

産業グレードの品質
RoHS準拠
CE認証取得
1年保証

技術的詳細

Material:

製品資料

データシート

技術仕様と性能データ

ユーザーマニュアル

設置・操作ガイド