


| パラメータ | 価値 |
|---|---|
| アイテム | Specifications |
| タイプ | Ultra low inertia |
| 軸 | Key-way, center tap |
| 製品 | Servo Motor |
| 特徴 | Compact Servo Only for Position Control. |
| オイルシール | without |
| 囲い | IP65 |
| 質量(kg) | 0.96 |
| 部品番号 | MUMA022P1S |
| 製品名 | MINAS E series Servo Motor |
| 定格出力 | 200 W |
| ブレーキを握る | without |
| エンクロージャについて | Except rotating portion of output shaft and leadwire end. |
| 定格トルク(N⋅m) | 0.64 |
| 電圧仕様 | 200 V |
| 定格電流(A(rms)) | 1.6 |
| 環境条件 | For more details, please refer to the instruction manual. |
| ロータリーエンコーダ:解像度 | 10000 |
| 定格回転速度(r/min) | 5000 |
| ロータリーエンコーダ:仕様 | 2500 P/r Incremental |
| 回生ブレーキの周波数について | Note) 1. Regenerative brake frequency represents the frequency of the motor's stops from the rated speed with deceleration without load.⋅ If the load is connected, frequency will be defined as 1/( m + 1 ), where m = ( load moment of inertia ) / ( rotor moment of inertia ).⋅ When the motor speed exceeds the rated speed, regenerative brake frequency is in inverse proportion to the square of ( running speed / rated speed ).⋅ Power supply voltage is AC115 V ( at 100 V of the main voltage ). If the supply voltage fluctuates, frequency is in inverse proportion to the square of ( Running supply voltage /115 ) relative to the value in the table.⋅ When regeneration occurs continuosly such cases as running speed frequently changes or vertical feeding, consult us or a dealer.Note) 2. If the effective torque is within the rated torque, there is no limit in regenerative brake. |
| 瞬間最大ピークトルク(N⋅m) | 1.91 |
| 回生ブレーキ頻度(回/分) | Without option :No limitWith option :No limitOption (External regenerative resistor) Part No. : DV0P2891 |
| ローターの慣性モーメント(x10-4kg ⋅ m²) | 0.10 |
| 負荷とローターの推奨慣性モーメント比 | 30 times or less |
| 負荷とローターの推奨慣性モーメント比について | Note) 3. Consult us or a dealer if the load moment of inertia exceeds the specified value. |
技術仕様と性能データ
設置・操作ガイド