

| パラメータ | 価値 |
|---|---|
| 426 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%) | |
| EMC | B |
| 平均故障間隔 | 272 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day)) |
| 平均時間 | 957 Years (SN 29500 standard, temperature 25°C, operating cycle 21%) |
| 注記 | Please follow the special installation instructions in the documentation! |
| 深さ | 105 mm |
| 入力 | ± 2 kV |
| 幅 | 35 mm |
| 身長 | 99 mm |
| 信号 | Modbus |
| 電圧 | 10 V |
| 高度 | ≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation) |
| コメント | Criterion B |
| EMCノート | EMC: class A product, see manufacturer's declaration in the download area |
| 湿度 | A |
| ビット遅延 | ≤ 1 bit |
| 囲い | Required protection according to the Rules shall be provided upon installation on board |
| 振動 | A |
| CCCexノート | Use in potentially explosive areas is not permitted in China. |
| 波長 | 850 nm |
| 証明書 | CE-compliant |
| 基準A | Normal operating behavior within the specified limits. |
| 基準B | Temporary impairment to operational behavior that is corrected by the device itself. |
| 繊維の種類 | 200/230 µm |
| 出力名 | Relay output |
| 温度 | B |
| 製品タイプ | Media converter |
| 取り付けタイプ | DIN rail mounting |
| 識別 | II 3 G Ex ec IIC T4 Gc |
| 騒音放出 | EN 55011 |
| ノイズ耐性 | EN 61000-6-2:2005 |
| カラー(ハウジング) | gray (RAL 7042) |
| 電界強度 | 10 V/m |
| チャンネル数 | 1 |
| 記事の改訂 | 13 |
| 空中放電 | ± 8 kV |
| 剥ぎ取り長さ | 7.00 mm |
| 接続方法 | COMBICON plug-in screw terminal block |
| 接触放電 | ± 6 kV |
| 出力数 | 1 |
| 締め付けトルク | 0.56 Nm ... 0.79 Nm |
| ファイル形式/コーディング | UART (11/10 bit switchable; NRZ), slip-tolerant |
| 材質(ハウジング) | PA 6.6-FR |
| 出力の説明 | Alarm output |
| 申請に関する注意事項 | Only for industrial use |
| 伝送距離 | ≤ 1200 m (depending on the data rate, with shielded, twisted data cable) |
| 伝送媒体 | PCF fiber |
| 保護の程度 | IP20 |
| 電気的絶縁 | VCC // RS-485 |
| 供給電圧範囲 | 18 V DC ... 30 V DC (via pluggable COMBICON screw terminal block) |
| 終端抵抗 | 390 Ω (Can be connected) |
| ビット歪み、入力 | ± 35 % (permitted) |
| 規格・規制 | EN 61000-4-2 |
| 伝送プロトコル | Protocol-transparent to the RS-485 interface |
| ビット歪み、出力 | < 6.25 % |
| 公称電源電圧 | 24 V DC (in acc. with UL) |
| データ方向の切り替え | Automatic control |
| 最大消費電流 | 130 mA |
| 最大スイッチング電圧 | 60 V DC (Resistive Load, General Load) |
| シリアル伝送速度 | 4.8/ 9.6/ 19.2/ 38.4/ 57.6/ 75/ 93.75/ 115.2/ 136/ 187.5/ 375/ 500 kbps |
| 送信容量、最小 | -4 dBm (200/230 µm) |
| 連続電流の制限 | 0.46 A |
| 標準消費電流 | 120 mA (24 V DC) |
| 最大受信感度 | -3 dBm (200/230 µm) |
| 最小受信感度 | -32.5 dBm (50/125 µm) |
| 電磁両立性 | Conformance with EMC Directive 2014/30/EU |
| 周囲温度(動作) | -20 °C ... 60 °C |
| 許容湿度(動作) | 30 % ... 95 % (non-condensing) |
| 単線/端子ポイント、フレキシブル | 0.2 mm² ... 2.5 mm² |
| 単一導体/端子点、剛性 | 0.2 mm² ... 2.5 mm² |
| 周囲温度(保管/輸送) | -40 °C ... 85 °C |
| テスト電圧データインターフェース/電源 | 1.5 kVrms(50 Hz, 1 min.) |
| 最大AWG導体断面積、フレキシブル | 14 |
| 最小AWG導体断面積、フレキシブル | 24 |
| 単線/端子点、リジッド AWG 最大。 | 14 |
| 単線/端子点、リジッド AWG 最小。 | 24 |
| 3 dBシステム予備を含む伝送距離 | 2800 m (F-K 200/230 8 dB/km with quick mounting connector) |
| 公称条件での最大消費電力 | 2.88 W |
| コーティングの適用を損なう可能性のある物質を含まない | VDMA 24364:2018-05 |
技術仕様と性能データ
設置・操作ガイド