

| パラメータ | 価値 |
|---|---|
| • WARNING: only qualified personnel specialized in electrical engineering can install and use the product, always taking into account the following safety indications. Specialized personnel must be familiar with the fundamentals of electrical engineering. You must be able to identify and avoid hazards. The corresponding symbol on the packaging indicates that personnel specialized in electrical engineering are required for installation and operation. | |
| 色 | black |
| ケーブルタイプ | Photovoltaic cables |
| プラグサイクル | 50 |
| 製品タイプ | Photovoltaic plug-in connector |
| 安全に関する注意事項 | • WARNING: Serve only products in perfect condition. Products should be checked regularly for damage. Remove defective products immediately. Replace damaged products. It is not possible to repair them. |
| 定格電流 | 35 A |
| 耐油性 | No |
| 接続タイプ | Spring-loaded |
| 極数 | 1 |
| 接触材料 | Cu |
| 保護指数 | IP66 / IP68 (2 m / 24 h) (After connection) |
| 表面接触 | Ag |
| 接触抵抗 | ≤ 0.5 mΩ |
| 保護の種類 | Iii |
| 公称電圧UN | 1500 V |
| 汚染度 | 2 |
| 断熱材 | PC/PA |
| AWG導体セクション | (Converted according to IEC) |
| サイジング電圧(II/2) | 1500 V |
| シングルドライバー、セクション | 4 mm² 6 mm² |
| ケーブル外径() | 5 mm ... 8 mm |
| 定格電流(6.0 mm²) | 40 A |
| 絶縁除去する長さ | 15 mm |
| 材質: 接触面 | Sn |
| 周囲温度(サービス) | -40 °C ... 85 °C |
| 周囲温度(取り付け) | -25 °C ... 50 °C |
| 過渡電圧の寸法決定 | 16 kV |
| コードを抜くときの力 | > 80 N |
| UL 94準拠の難燃性クラス | V0 |
| 過渡電圧の測定(III/2) | 16 kV |
| 過渡電圧の測定(III/3) | 16 kV |
| 周囲温度(保管/輸送) | -40 °C ... 85 °C |
技術仕様と性能データ
設置・操作ガイド