

| パラメータ | 価値 |
|---|---|
| • WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product. | |
| 幅 | 7 mm |
| 身長 | 7.7 mm |
| 長さ | 28.8 mm |
| 安全に関する注意事項 | • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible. |
| 製品タイプ | Crimp contact |
| 製品ファミリー | SUNCLIX |
| 接触面 | Silver Ag |
| 挿入力 | ≤ 20 N (uninstalled state) |
| 記事の改訂 | 06 |
| 接触材料 | Cu |
| 撤退部隊 | ≤ 20 N (uninstalled state) |
| 接続方法 | Crimp |
| 接触抵抗 | 0.45 mΩ |
| 操作上の注意 | Crimping recommendation: Crimp the conductor with the crimp contact in accordance with IEC 60352 |
| 汚染度 | 2 |
| 寸法図 | |
| 申請に関する注意事項 | When using the CRIMPFOX-P SR 6 manual crimping tool, item no. 1212755, please note the use of the standard locator (no marking). |
| ポジション数 | 1 |
| 最大負荷電流 | 40 A (for 6 mm²) |
| 定格電圧(II/2) | 1000 V |
| 定格電圧(III/2) | 1500 V |
| 接点接続タイプ | Pin |
| 接触面材質 | Ag |
| 定格電流(6.0 mm²) | 35 A |
| 絶縁材料グループ | I / CTI 600 |
| 定格サージ電圧(II/2) | 12 kV |
| 断面積範囲(メートル法) | 6 mm² |
| 挿入/離脱サイクル | 100 |
| 定格サージ電圧(III/2) | 12 kV |
| 定格サージ電圧(III/3) | 16 kV |
| 周囲温度(アセンブリ) | -25 °C ... 50 °C |
| 周囲温度(動作) | -40 °C ... 85 °C (installed with PV-...-HSG) |
| 保護等級(プラグ未接続時) | IP20 |
| 保護等級(プラグ接続時) | IP66 / IP68 (2 m / 24 h) |
| UL 94準拠の難燃性評価 | V0 |
| 個々の電線の被覆剥き長さ | 8 mm +1 mm |
技術仕様と性能データ
設置・操作ガイド