

| パラメータ | 価値 |
|---|---|
| 2 WH | |
| 幅 | 27 mm |
| 身長 | 27 mm |
| 長さ | 41.2 mm |
| シールド | no |
| ケーブル長 | 0.5 m |
| 製品タイプ | Panel feed-through |
| 組み立てノート | If the conductor is reconnected, it must be cut off above the last contact point. QUICKON components may only be operated when under no load. |
| 取り付けタイプ | Front mounting M25 |
| 定格電流 | 17.5 A |
| カラー(ハウジング) | green (RAL 6021) |
| 衝撃強度 | IK07 |
| 接触材料 | Copper alloy |
| マテリアルハウジング | PA |
| ポジションマーキング | 1, 2, 3, 4 |
| 接触抵抗 | < 3 mΩ |
| 公称電流IN | 17.5 A |
| 公称電圧UN | 250 V AC |
| ケーブル断面 | 1.5 mm² |
| 汚染度 | 3 |
| 寸法図 | |
| ポジション数 | 4 |
| 保護の程度 | IP65 |
| 過電圧カテゴリー | III |
| 定格電圧(II/2) | 630 V (with insulating sleeve) |
| 接続数 | 4 |
| 定格電圧(III/3) | 250 V (with insulating sleeve) |
| レンチサイズ ユニオンナット | 27 mm |
| 定格電圧(III/2) | 320 V (with insulating sleeve) |
| ケーブル外径 | 6 mm ... 12 mm |
| 接触キャリア材料 | PA 6.6 |
| 接触面材質 | Pre-nickel plated and tin-plated |
| 材質電線絶縁体 | PVC / PE |
| 定格サージ電圧(III/3) | 6 kV |
| 締め付けトルク ユニオンナット | 3.3 Nm |
| レンチサイズ キャリアにお問い合わせください | 30 mm |
| 接続断面積AWG | 18 ... 16 |
| 導体断面固体 | 0.75 mm² ... 1 mm² |
| 締め付けトルク ロックナット | 5 Nm |
| 周囲温度(動作) | -25 °C ... 80 °C (specifications of the cable manufacturer must also be observed) |
| 導体断面フレキシブル | 0.75 mm² ... 1.5 mm² |
| ポジションあたりの接続数 | 1 |
| 絶縁体を含む線径 | 1.8 mm ... 3 mm |
| 接続方法 デバイス側 | Single wires |
| 導体接続時の温度 | -5 °C ... 50 °C (specifications of the cable manufacturer must also be observed) |
| UL 94準拠の難燃性評価 | V0 |
| 接点色(信号指定)接点(オプション) | 1 BN |
| 同じ断面積の導体間の接続頻度 | 10 (if the conductor is connected more than once, seal and cap may need to be replaced.) |
| VDE 0295に準拠した個々のリッツの構造/最小線径 | VDE 0295 Cl.2-5, min. wire diameter 0.2 mm |
技術仕様と性能データ
設置・操作ガイド