

| パラメータ | 価値 |
|---|---|
| 250 V DC | |
| 注記 | Due to the extremely robust outer sheath, this cable should only be stripped in 5 cm increments. |
| タイプ | Plug straight M12 |
| コーディング | A |
| シールド | no |
| ケーブルタイプ | Gray, highly flexible PUR [800] |
| 応用 | Robots and drag chains |
| コーディングタイプ | A |
| ケーブル長 | 1.5 m |
| ケーブル重量 | 28.3 kg/km |
| ハロゲンフリー | in accordance with DIN VDE 0472 part 815 |
| 製品タイプ | Sensor/actuator cable |
| 試験電圧 | 2000 V |
| UL AWMスタイル | 20549 |
| 全体的なひねり | 3 wires, twisted |
| シール材 | NBR |
| ステータス表示 | no |
| AWG信号線 | 22 |
| 接触材料 | CuSn |
| 難燃性 | in accordance with UL 758/1581 FT2 |
| その他の抵抗 | Highly resistant to acids, alkaline solutions and solvents |
| 耐油性 | in accordance with DIN EN 60811-2-1 |
| 締め付けトルク | 0.4 Nm (M12 connector) |
| 導体材料 | Bare Cu litz wires |
| 公称電流IN | 4 A |
| 公称電圧UN | 250 V AC |
| 単線、カラー | brown, blue, black |
| 特別な特性 | Cable jacket is welding spark-resistant, recyclable, matt, low-adhesion, abrasion-resistant, flame-retardant, and self-extinguishing |
| 汚染度 | 3 |
| 寸法図 | |
| ポジション数 | 3 |
| 保護の程度 | IP65 |
| ケーブル出口の数 | 1 |
| 過電圧カテゴリー | II |
| 標準指定 | M12 connector |
| 絶縁抵抗 | ≥ 100 MΩ |
| グリップ本体の材質 | TPU, hardly inflammable, self-extinguishing |
| 外装シース、カラー | gray RAL 7001 |
| 公称電圧、ケーブル | 300 V |
| 外装材 | PUR |
| ステータス表示あり | No |
| 導体断面積 | 3x 0.34 mm² (Signal line) |
| ケーブル外径 | 4.50 mm ±0.2 mm |
| 接触キャリア材料 | TPU GF |
| 接触面材質 | Ni/Au |
| 材質電線絶縁体 | PP |
| 規格/仕様 | IEC 61076-2-101 |
| 最大導体抵抗 | approx. 53 Ω/km |
| 挿入/離脱サイクル | ≥ 100 |
| ねじ接続用材質 | Zinc die-cast, nickel-plated |
| 絶縁体を含む線径 | 1.3 mm ±0.05 mm (Signal line) |
| 周囲温度(動作) | -40 °C ... 80 °C (cable, fixed installation) |
| 導体構造信号線 | 42x 0.10 mm |
| 動的荷重容量(曲げ) | Max. bending cycles: 10000000, Bending radius: 7,5 x D, Traversing path: 5 m, Traversing rate: 3.3 m/s, Acceleration: 5 m/s² |
| 動的荷重容量(ねじり) | Torsion: ±360 °/m, Torsion cycles: 1000000 |
| UL 94準拠の難燃性評価 | HB |
| 最小曲げ半径、固定設置 | 4 x D |
| 最小の曲げ半径、固定設置 | 18 mm |
| 最小曲げ半径、柔軟な設置 | 7.5 x D |
| 最小の曲げ半径、可動設置 | 34 mm |
技術仕様と性能データ
設置・操作ガイド