

| パラメータ | 価値 |
|---|---|
| Status display I/O Yellow LED | |
| 導かれた | yes |
| 幅 | 58 mm |
| コーディング | A |
| 身長 | 26 mm |
| 長さ | 117 mm |
| シールド | no |
| ケーブルタイプ | PUR/PVC black [PUR] |
| 応用 | Standard |
| ケーブル長 | 10 m |
| ケーブル重量 | 77.9 kg/km |
| 製品タイプ | Distributor box |
| 試験電圧 | 2000 V |
| UL AWMスタイル | 20549 |
| 組み立てノート | NOTE:Observe the permissible bending radii when routing cables, since the degree of protection may be at risk if the bending forces are too high. Reduce mechanical loads upstream of the connector, e.g., by using cable ties. |
| 全体的なひねり | Wires twisted in layers |
| AWG信号線 | 22 |
| スロット数 | 4 |
| 接触材料 | Cu alloy |
| 難燃性 | DIN EN 50265 |
| マテリアルハウジング | PBT |
| その他の抵抗 | Highly resistant to acids, alkaline solutions and solvents |
| ローカル診断 | Supply voltage Green LED |
| 耐油性 | according to VDE 0472 Part 803 |
| 導体材料 | Bare Cu litz wires |
| 監視対象機能 | Supply voltage |
| 公称電圧UN | 24 V DC |
| 単線、カラー | brown, blue, green/yellow, white, green, yellow, gray |
| 特別な特性 | Silicone-free |
| 寸法図 | |
| 申請に関する注意事項 | Unused slots are to be sealed off prior to commissioning. Suitable sealing elements are to be found under "Accessories". |
| ポジション数 | 4 |
| 保護の程度 | IP65 |
| 定格電流、合計 | 12 A |
| シール材Oリング | NBR |
| 標準指定 | M12 connector |
| 外装シース、カラー | black RAL 9005 |
| 内鞘の厚さ | ≥ 0.15 mm |
| 公称電圧、ケーブル | 300 V |
| 光学的表現 | Green LED |
| 外装材 | PUR |
| ステータス表示あり | Yes |
| 導体断面積 | 4x 0.34 mm² (Signal line) |
| ケーブル外径 | 6.90 mm ±0.2 mm |
| 厚さ、外皮 | ≥ 0.38 mm |
| 接触キャリア材料 | PA |
| 接触面材質 | gold-plated |
| 材質 ねじ付きスリーブ | Die-cast zinc |
| 材質電線絶縁体 | PVC |
| 規格/仕様 | IEC 61076-2-101 |
| 材料 成形コンパウンド | PUR |
| 最大動作電圧 Umax | 30 V DC |
| 絶縁体を含む線径 | 1.3 mm ±0.1 mm (Signal line) |
| 周囲温度(動作) | -40 °C ... 90 °C (cable, fixed installation) |
| 導体構造信号線 | 19x 0.15 mm |
| 動的荷重容量(曲げ) | Max. bending cycles: 1500000, Bending radius: 69 mm, Traversing path: 2 m, Traversing rate: 2 m/s |
| センサー/アクチュエータ接続システム | M12-SPEEDCON-socket |
| スロットあたりの電流容量 | 4 A |
| UL 94準拠の難燃性評価 | V0 |
| パスあたりの最大電流容量 | 2 A |
| スロット/位置 = 配線の色または接続 | 1 / 4 (A) = WH |
| 最小曲げ半径、固定設置 | 7.5 x D |
| 最小の曲げ半径、固定設置 | 52 mm |
| 締め付けトルクスロットセンサー/アクチュエータケーブル | 0.4 Nm |
| 最小曲げ半径、柔軟な設置 | 10 x D |
| 最小の曲げ半径、可動設置 | 69 mm |
| ハウジング固定用取付ネジの締め付けトルク | 0.5 Nm |
技術仕様と性能データ
設置・操作ガイド