

| パラメータ | 価値 |
|---|---|
| 120 V DC | |
| 導かれた | no |
| 幅 | 58 mm |
| 身長 | 21 mm |
| 長さ | 34 mm |
| シールド | no |
| ケーブルタイプ | PUR/PVC black [PUR] |
| 応用 | Sensor/actuator box |
| ケーブル長 | 10 m |
| ケーブル重量 | 122 kg/km |
| 製品タイプ | Connector hood |
| 試験電圧 | 2000 V |
| UL AWMスタイル | 20549 |
| 組み立てノート | NOTE:Observe the permissible bending radii when routing cables, since the degree of protection may be at risk if the bending forces are too high. Reduce mechanical loads upstream of the connector, e.g., by using cable ties. |
| 全体的なひねり | Wires twisted in layers |
| AWG信号線 | 20 |
| スロット数 | 4 |
| 難燃性 | DIN EN 50265 |
| マテリアルハウジング | PBT |
| その他の抵抗 | Highly resistant to acids, alkaline solutions and solvents |
| 接続方法 | Pluggable screw connection |
| 耐油性 | according to VDE 0472 Part 803 |
| 導体材料 | Bare Cu litz wires |
| 公称電圧UN | 120 V AC |
| 単線、カラー | brown, blue, green/yellow, white, green, yellow, gray, gray/pink, red/blue, white/green, brown/green |
| 特別な特性 | Silicone-free |
| 寸法図 | |
| ポジション数 | 11 |
| 保護の程度 | IP65 |
| 定格電流、合計 | 10 A |
| 外装シース、カラー | black RAL 9005 |
| 内鞘の厚さ | ≥ 0.15 mm |
| 公称電圧、ケーブル | 300 V |
| 外装材 | PUR |
| ステータス表示あり | No |
| 導体断面積 | 8x 0.5 mm² (Signal line) |
| ケーブル外径 | 8.70 mm ±0.2 mm |
| 厚さ、外皮 | ≥ 0.38 mm |
| 材質電線絶縁体 | PVC |
| 締め付けトルク、カバーネジ | 0.35 Nm |
| 絶縁体を含む線径 | 1.5 mm ±0.1 mm (Signal line) |
| 周囲温度(動作) | -40 °C ... 90 °C (cable, fixed installation) |
| 導体構造信号線 | 28x 0.15 mm |
| 動的荷重容量(曲げ) | Max. bending cycles: 1500000, Bending radius: 87 mm, Traversing path: 2 m, Traversing rate: 2 m/s |
| センサー/アクチュエータ接続システム | M12-SPEEDCON-socket |
| スロットあたりの電流容量 | 4 A |
| マスターケーブル側接点材質 | CU alloy |
| パスあたりの最大電流容量 | 2 A |
| スロット/位置 = 配線の色または接続 | 1 / 4 (A) = WH |
| 最小曲げ半径、固定設置 | 7.5 x D |
| 最小の曲げ半径、固定設置 | 66 mm |
| 最小曲げ半径、柔軟な設置 | 10 x D |
| 最小の曲げ半径、可動設置 | 87 mm |
| マスターケーブル側接触面材質 | gold-plated |
| マスターケーブル側のコンタクトキャリアの材質 | PA |
技術仕様と性能データ
設置・操作ガイド