

| パラメータ | 価値 |
|---|---|
| 1.5 kV AC/DC | |
| 注記 | In line with |
| コーディング | T |
| シールド | no |
| ケーブルタイプ | UL/cUL stranded hook-up wire |
| ヘッドデザイン | Pin |
| センサータイプ | Power |
| ねじの種類 | M12 |
| ケーブル長 | 1 m |
| ハロゲンフリー | yes |
| 製品タイプ | Circular connectors (device side) |
| 試験電圧 | 1.5 kV |
| 組み立てノート | With flat nut |
| 取り付けタイプ | Rear mounting |
| シール材 | FKM |
| AWG信号線 | 16 |
| 記事の改訂 | 05 |
| 接触材料 | CuZn |
| 難燃性 | in acc. to UL 1581 VW1 |
| ヘッドねじの種類 | M12 |
| 接続方法 | Individual wires |
| 締め付けトルク | M12 connector |
| 導体材料 | Bare Cu litz wires |
| 接触抵抗 | ≤ 3 mΩ |
| 公称電流IN | 12 A |
| 公称電圧UN | 63 V |
| 操作上の注意 | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
| 注文情報: | Lock nut is included in the scope of delivery |
| 単線、カラー | black, brown, blue, white |
| ケーブル断面 | 1.31 mm² |
| 汚染度 | 3 |
| ポジション数 | 4 |
| 定格サージ電圧 | 1.5 kV |
| 保護の程度 | IP67 |
| ケーブル出口の数 | 1 |
| 過電圧カテゴリー | III |
| 信号の種類/カテゴリ | Power |
| 標準指定 | M12 connector |
| 絶縁抵抗 | ≥ 100 MΩ |
| 導体断面積 | 1.31 mm² |
| 接点接続タイプ | Pin |
| 接触キャリア材料 | PA |
| 接触面材質 | Au |
| 材質電線絶縁体 | mPPE |
| 規格/仕様 | IEC 61076-2-111 |
| 挿入/離脱サイクル | > 100 |
| ねじ接続用材質 | CuZn alloy, nickel-plated |
| 絶縁体を含む線径 | 2 mm |
| 周囲温度(動作) | -40 °C ... 105 °C (cable, fixed installation) |
| UL 94準拠の難燃性評価 | V0 |
技術仕様と性能データ
設置・操作ガイド