

| パラメータ | 価値 |
|---|---|
| 0.2 Nm (M8 knurl) | |
| コーディング | A |
| 長さ | 43.4 mm |
| 一般的な | NOTE:Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties. |
| シールド | no |
| ヘッドデザイン | Plug |
| ケーブルコンセント | straight |
| 製品タイプ | Circular connector (cable-side) |
| シール材 | NBR |
| 接触材料 | CuSn |
| 直径ハウジング | 12.5 mm |
| ヘッドねじの種類 | M8 |
| 外径 | 2.5 mm ... 5 mm ±0.2 mm |
| 接続方法 | Insulation displacement connection |
| ヘッドケーブル出口 | straight |
| 締め付けトルク | 0.6 Nm (Pressure nut) |
| 接触抵抗 | ≤ 5 mΩ |
| 公称電流IN | 4 A |
| 公称電圧UN | 60 V AC |
| 汚染度 | 3 |
| 寸法図 | |
| ポジション数 | 3 |
| 定格サージ電圧 | 0.8 kV |
| 保護の程度 | IP65 |
| ケーブル出口の数 | 1 |
| 過電圧カテゴリー | II |
| 標準指定 | M8 connector |
| 絶縁抵抗 | ≥ 100 MΩ |
| グリップ本体の材質 | PA 6 |
| 接続断面 | 0.25 mm² ... 0.5 mm² |
| 接触キャリア材料 | TPU GF |
| 接触面材質 | Ni/Au |
| 規格/仕様 | IEC 61076-2-104 |
| 電線絶縁材 | PVC / PE / PP / rubber |
| ケーブル外径() | 2.5 mm ... 5 mm |
| 挿入/離脱サイクル | ≥ 100 |
| 接続断面積AWG | 24 ... 20 |
| ねじ接続用材質 | Stainless steel 1.4305 |
| 周囲温度(動作) | -25 °C ... 80 °C (Plug / socket) |
| UL 94準拠の難燃性評価 | HB |
技術仕様と性能データ
設置・操作ガイド