

| パラメータ | 価値 |
|---|---|
| NBR | |
| コーディング | A |
| 長さ | 39 mm |
| 一般的な | Strip 22 mm off the cable sheath, shorten conductor for the fifth position by 10 mm. Strip 7 mm off the conductor insulation, crimp the ferrule, then shorten this to 5 mm. Length of conductors with shortened ferrule: 20 mm. Connect conductors and tighten the mounting screws with 0.2 Nm. |
| シールド | no |
| 応用 | Power supply |
| ヘッドデザイン | Socket |
| ケーブルコンセント | angled |
| 製品タイプ | Circular connector (cable-side) |
| 組み立てノート | NOTE:Observe the permissible bending radii when routing cables, since the degree of protection may be at risk if the bending forces are too high. Reduce mechanical loads upstream of the connector, e.g., by using cable ties. |
| シール材 | Viton |
| 記事の改訂 | 00 |
| 接触材料 | CuZn |
| 直径ハウジング | 20.2 mm |
| ヘッドねじの種類 | M12 |
| 外径 | 8 mm ... 10 mm |
| 接続方法 | Screw connection |
| ヘッドケーブル出口 | angled |
| 締め付けトルク | 0.4 Nm (M12 knurl) |
| 接触抵抗 | ≤ 3 mΩ |
| 公称電流IN | 8 A (Contact 5: 2 A) |
| 公称電圧UN | 48 V AC |
| 汚染度 | 3 |
| 寸法図 | |
| ポジション数 | 5 |
| Pgねじ接続 | Pg11 |
| 定格サージ電圧 | 0.8 kV |
| 保護の程度 | IP67 |
| ケーブル出口の数 | 1 |
| 過電圧カテゴリー | II |
| 標準指定 | M12 connector |
| 絶縁抵抗 | > 10 GΩ |
| グリップ本体の材質 | PA |
| 接続断面 | 0.75 mm² ... 1.5 mm² (without ferrule) |
| 接触キャリア材料 | PA |
| 接触面材質 | Ni/Au |
| 規格/仕様 | IEC 61076-2-101 |
| 挿入/離脱サイクル | > 100 |
| 接続断面積AWG | 18 ... 16 (without ferrule) |
| ねじ接続用材質 | Zinc die-cast, nickel-plated |
| 周囲温度(動作) | -40 °C ... 85 °C (Plug / socket) |
| UL 94準拠の難燃性評価 | V0 |
| 個々の電線の被覆剥き長さ | 5 mm |
技術仕様と性能データ
設置・操作ガイド