サービス時間: 月曜日~金曜日 9:00-18:00
SACC-M12FS-8CT-CM SH - SACC-M12FS-8CT-CM SH 1319942 PHOENIX CONTACT Connector, Universal, 8-pole, shielded, M12 straight connection..
在庫あり 注目商品

SACC-M12FS-8CT-CM SH

SACC-M12FS-8CT-CM SH 1319942 PHOENIX CONTACT Connector, Universal, 8-pole, shielded, M12 straight connection..

$26.61米ドル
411 在庫あり
主な仕様
:4 Nm (Pressure nut with coupling sleeve)
コーディング:A
長さ:42 mm
一般的な:NOTE:Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties.
サプライヤー情報
製品: 0
通常、2〜3営業日以内に出荷します
品質保証済み
高速配送
テクニカルサポート

技術仕様

パラメータ価値
4 Nm (Pressure nut with coupling sleeve)
コーディングA
長さ42 mm
一般的なNOTE:Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties.
シールドyes
ヘッドデザインSocket
センサータイプUniversal
ケーブルコンセントstraight
製品タイプCircular connector (cable-side)
シール材FKM
直径ハウジング16 mm
ヘッドねじの種類M12
外径4.5 mm ... 7.5 mm
接続方法Crimp connection
ヘッドケーブル出口straight
締め付けトルク0.4 Nm (M12 knurl)
公称電流IN2 A
公称電圧UN30 V AC
汚染度3
寸法図
ポジション数8
定格サージ電圧0.8 kV
保護の程度IP65
ケーブル出口の数1
過電圧カテゴリーII
信号の種類/カテゴリUniversal
標準指定M12 connector
絶縁抵抗≥ 100 MΩ
グリップ本体の材質Zinc die-cast, nickel-plated
レンチサイズ、ユニオンナット15 mm
接続断面0.14 mm² ... 0.34 mm² (flexible)
規格/仕様IEC 61076-2-101
レンチサイズ、カウンターナット14 mm
挿入/離脱サイクル≥ 100
接続断面積AWG26 ... 22 (flexible)
ねじ接続用材質Zinc die-cast, nickel-plated
周囲温度(動作)-40 °C ... 85 °C (Plug / socket)
UL 94準拠の難燃性評価V0
個々の電線の被覆剥き長さ4 mm +0,5 mm

製品説明

Connector, Universal, 8-position, shielded, Socket straight M12, coding: A, Crimp connection, knurl material: Zinc die-cast, nickel-plated, external cable diameter 4.5 mm ... 7.5 mm, without crimp con
主な機能
  • 産業グレードの品質
  • RoHS準拠
  • CE認証取得
  • 1年保証

製品資料

データシート

技術仕様と性能データ

ユーザーマニュアル

設置・操作ガイド

Top