サービス時間: 月曜日~金曜日 9:00-18:00
SACC-M12MSD-4Q SH PN - SACC-M12MSD-4Q SH PN 1554513 PHOENIX CONTACT Bus system connector
在庫あり 注目商品

SACC-M12MSD-4Q SH PN

SACC-M12MSD-4Q SH PN 1554513 PHOENIX CONTACT Bus system connector

$29.02米ドル
388 在庫あり
主な仕様
:0.8 Nm (Connector with coupling sleeve)
幅:19 mm
コーディング:D
身長:19 mm
サプライヤー情報
製品: 0
通常、2〜3営業日以内に出荷します
品質保証済み
高速配送
テクニカルサポート

技術仕様

パラメータ価値
0.8 Nm (Connector with coupling sleeve)
19 mm
コーディングD
身長19 mm
長さ61 mm
一般的なThis product corresponds to the PROFINET Cabling and Interconnection Technology Guideline for PROFINET regulations, version 2.00, order no: 2.252, Chapter 8.2 Connectors for Outside Environment (Balanced cabling)
シールドyes
応用Data
ヘッドデザインPlug
センサータイプPROFINET
ケーブルコンセントstraight
製品タイプCircular connector (cable-side)
組み立てノートNOTE:Observe the permissible bending radii when routing cables, since the degree of protection may be at risk if the bending forces are too high. Reduce mechanical loads upstream of the connector, e.g., by using cable ties.
シール材Neoprene
接触材料CuSn
直径ハウジング19 mm
ヘッドねじの種類M12
外径4 mm ... 8 mm
接続方法Insulation displacement connection
ヘッドケーブル出口straight
締め付けトルク0.4 Nm (M12 knurl)
接触抵抗≤ 5 mΩ
公称電流IN1.75 A
公称電圧UN48 V AC
汚染度3
寸法図
ポジション数4
保護の程度IP67
ケーブル出口の数1
過電圧カテゴリーII
信号の種類/カテゴリPROFINET CAT5 (based on IEC 11801), 100 Mbps
標準指定M12 connector
絶縁抵抗≥ 100 MΩ
グリップ本体の材質Zinc die-cast, nickel-plated
接触キャリア材料PA 6
接触面材質Ni/Au
規格/仕様according to IEC 61076-2-101
挿入/離脱サイクル≥ 100
接続断面積AWG23 ... 22
ねじ接続用材質Brass, nickel-plated
周囲温度(動作)-40 °C ... 85 °C
UL 94準拠の難燃性評価V0

製品説明

Data connectors, PROFINET CAT5 (100 MBit/s), 4-pole, shielded, M12 straight male connector, D-coded, Offset connection. Insulation, Knurling Material: Brass, Nickel Plated, Cable Outer Diameter 4mm...
主な機能
  • 産業グレードの品質
  • RoHS準拠
  • CE認証取得
  • 1年保証

製品資料

データシート

技術仕様と性能データ

ユーザーマニュアル

設置・操作ガイド

Top