

| パラメータ | 価値 |
|---|---|
| 2x 4 mm ... 5.2 mm (when using the seal for large outer cable diameters) | |
| コーディング | A |
| 長さ | 63 mm |
| シールド | no |
| ヘッドデザイン | Plug |
| センサータイプ | Universal |
| ケーブルコンセント | straight |
| 製品タイプ | Circular connector (cable-side) |
| 組み立てノート | NOTE:Observe the permissible bending radii when routing cables, since the degree of protection may be at risk if the bending forces are too high. Reduce mechanical loads upstream of the connector, e.g., by using cable ties. |
| シール材 | NBR |
| 接触材料 | CuZn |
| 直径ハウジング | 20 mm |
| ヘッドねじの種類 | M12 |
| 外径 | 2x 2.1 mm ... 3 mm (when using the seal for small outer cable diameters) |
| 接続方法 | Screw connection |
| ヘッドケーブル出口 | straight |
| ヘッドロックタイプ | SPEEDCON |
| 締め付けトルク | 0.4 Nm (M12 knurl) |
| 接触抵抗 | ≤ 8 mΩ |
| 公称電流IN | 4 A |
| 公称電圧UN | 48 V AC |
| 汚染度 | 3 |
| 寸法図 | |
| ポジション数 | 5 |
| Pgねじ接続 | Pg11 |
| 定格サージ電圧 | 1.5 kV |
| 保護の程度 | IP67 |
| ケーブル出口の数 | 2 |
| 過電圧カテゴリー | II |
| 信号の種類/カテゴリ | Universal |
| 標準指定 | M12 connector |
| 絶縁抵抗 | ≥ 100 MΩ |
| グリップ本体の材質 | PA |
| 接続断面 | 0.25 mm² ... 0.75 mm² (without ferrule) |
| 接触キャリア材料 | PA |
| 接触面材質 | CuSnZn |
| 規格/仕様 | IEC 61076-2-101 |
| 挿入/離脱サイクル | ≥ 100 |
| 接続断面積AWG | 24 ... 18 (without ferrule) |
| ねじ接続用材質 | Zinc die-cast, nickel-plated |
| 周囲温度(動作) | -40 °C ... 85 °C (Plug / socket) |
| 個々の電線の被覆剥き長さ | 5 mm |
技術仕様と性能データ
設置・操作ガイド