

| パラメータ | 価値 |
|---|---|
| 250 V DC | |
| シールド | no |
| ヘッドデザイン | Valve connector |
| 製品タイプ | Valve connectors |
| 組み立てノート | NOTE:Observe the permissible bending radii when routing cables, since the degree of protection may be at risk if the bending forces are too high. Reduce mechanical loads upstream of the connector, e.g., by using cable ties. |
| シール材 | NBR |
| ステータス表示 | no |
| 接触材料 | CuZn |
| ヘッドねじの種類 | CI (9.4 mm) |
| 外径 | 4 mm ... 6 mm |
| 接続方法 | Screw connection |
| 接触抵抗 | ≤ 15 mΩ |
| 公称電流IN | 6 A |
| 公称電圧UN | 250 V AC |
| 保護回路 | unwired |
| 汚染度 | 3 |
| ポジション数 | 3 |
| Pgねじ接続 | Pg7 |
| 保護の程度 | IP65 |
| ケーブル出口の数 | 1 |
| 過電圧カテゴリー | II |
| 絶縁抵抗 | ≥ 100 MΩ |
| ステータス表示あり | No |
| 導体断面積 | 0.34 mm² ... 1.5 mm² |
| 接触面材質 | Ni |
| 挿入/離脱サイクル | 50 (Valve connector) |
| 材料ハウジングバルブプラグ | PA 6 |
| 接続断面積AWG | 22 ... 16 |
| 周囲温度(動作) | -30 °C ... 100 °C (valve plug) |
| バルブプラグ接触インサート材料 | PA 6 |
| UL 94準拠の難燃性評価 | HB |
技術仕様と性能データ
設置・操作ガイド