

| パラメータ | 価値 |
|---|---|
| • WARNING: Serve only products in perfect condition. Products should be checked regularly for damage. Remove defective products immediately. Replace damaged products. It is not possible to repair them. | |
| 一般的な | Order the crimped contacts separately |
| ロックタイプ | for standard and SPEEDCON locking |
| プラグフェイス | 6+4+4+PE |
| 観察 | In the case of connection cross-section max. |
| ねじの種類 | M40 |
| 応用 | Hybrid |
| 製品タイプ | Circular connector (cable side) |
| 安全に関する注意事項 | WARNING: Connectors should not be plugged in or unplugged under load. Failure to comply and improper use can result in property damage and personal injury. |
| シェル素材 | Rotating Parts: Copper-Zinc Alloy (CuZn), Pressed Castings: Zinc (GD-Zn) |
| サージカテゴリー | Iii |
| ガスケット材質 | FKM |
| 公称電圧 | 630 V AC |
| 極数 | 15 |
| Pgケーブルグランド | without |
| 汚染度 | 3 |
| ケーブル外径 | 9 mm ... 14 mm |
| 回転方向 | Standard |
| 接点スイッチングタイプ | Female |
| データ転送速度 | 100 MBit/s |
| 保護インデックス(挿入) | IP68/IP69K |
| 定格電流電源接点 | 70 A |
| 周囲温度(サービス) | -40 °C ... 115 °C |
| 公称電圧データ接点 | 50 V |
| 接触直径データ接触 | 0.6 mm |
| コンタクト径パワーコンタクト | 3.6 mm |
| 過渡電圧の寸法決定 | 6 kV |
| 連絡先直径信号連絡先 | 1 mm |
| 公称電圧警告接点 | 500 V |
| 信号接点あたりの公称電流 | 8 A |
| 定格電圧(II/3)電源接点 | 850 V DC |
| 定格電圧(III/3)電源接点 | 630 V AC |
| 定格電圧(III/3)警告接点 | 500 V |
| 編組糸部パワーコンタクト最大。 | 16 mm² |
| 編組糸セクション電力接点最小。 | 2.5 mm² |
| 編組線セクションデータ接点最大。 | 0.25 mm² |
| 編組糸セクションデータ連絡先最小。 | 0.08 mm² |
| 編組糸セクション信号接点最大。 | 1.5 mm² |
| 編組糸セクション信号接点分。 | 0.06 mm² |
| 25°Cでのデータ接点あたりの定格電流 | 2 A |
技術仕様と性能データ
設置・操作ガイド