在庫あり 注目商品
SF2BA10P
SF2BA10P SF2B-A10-P PANASONIC Safety light curtain, arm type, PNP, 392mm
$0.00米ドル
4373 在庫あり
主な仕様
アイテム:Specifications
PFHD:6.22 × 10-9
MTTFD:100 years or more
詳細:Min. sensing object ø47 mmø1.850 intype (40 mm1.575 inbeam pitch)
サプライヤー情報
PANASONIC
製品: 4316
通常、2〜3営業日以内に出荷します
品質保証済み
高速配送
テクニカルサポート
技術仕様
| パラメータ | 価値 |
|---|---|
| アイテム | Specifications |
| PFHD | 6.22 × 10-9 |
| MTTFD | 100 years or more |
| 詳細 | Min. sensing object ø47 mmø1.850 intype (40 mm1.575 inbeam pitch) |
| 製品 | Safety Light Curtain Type 2 |
| 材料 | Enclosure: AluminiumUpper and lower edges : Die-cast zine alloyInner case: Polycarbonate / Polyester resinCap: PBT |
| ビームピッチ | 40 mm1.575 in |
| 部品番号 | SF2B-A10-P |
| 製品名 | Safety Light Curtain Type 2 SF2B Ver.2 |
| 電源電圧 | 24 V DC plus or minus 15 % Ripple P-P 10 % or less |
| 応答時間 | OFF response: 15 ms or lessON response: 40 to 60 ms |
| 製品番号 | SF2B-A10-P |
| ケーブル延長 | Extension up to total 30.5 m100.066 ftis possible for both emitter and receiver, with optional mating cables. |
| 動作範囲 | 0.2 to 13 m0.656 to 42.651 ft(0.2 to 5 m0.656 to 16.404 ftwhen using the SF2B-CB05-B adapter cable) |
| 周囲の湿度 | 30 to 85 % RH, Storage: 30 to 95 % RH |
| 発光要素 | Infrared LED (Peak emission wavelength: 870 nm0.034 mil) |
| 耐衝撃性 | 300 m/s2acceleration (30 G approx.) in X, Y and Z directions three times each |
| 接続方法 | Connector |
| 保護高さ | 392 mm15.433 in |
| 周囲照度 | Incandescent light: 3,500 lx or less at the light-receiving face |
| 周囲温度 | -10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -25 to +70 ℃-13 to +158 ℉ |
| 消費電流 | Emitter: 35 mA or lessReceiver: 50 mA or less |
| 最小検知物体 | ø47 mmø1.850 inopaque object |
| ビームチャンネル数 | 10 |
| 耐振動性 | 10 to 55 Hz frequency, 0.75 mm0.030 indouble amplitude in X, Y and Z directions for two hours each |
| 絶縁抵抗 | 20 MΩ , or more, with 500 V DC megger between all supply terminals connected together and enclosure |
| 補助出力（Aux） | PNP open-collector transistor- Max. source current: 60 mA- Applied voltage: same as supply voltage [between the auxiliary output and +V]- Residual voltage: 2.5 V or less (sink current 60 mA)(when using 30.5 m100.066 ftlength cable)(Note) When using auxiliary output (AUX), the SF2B-CB05-B adapter cable (optional) cannot be used. |
| 排出停止機能 | Incorporated |
| 同期方法 | Cable synchronization (optical synchronization when using SF2B-CB05-B) |
| 有効開口角 | plus or minus 5℃ or less [for an operating range exceeding 3 m9.843 ft(conforming to IEC 61496-2 / UL 61496-2)] |
| 適用規格：日本 | JIS B 9704-1/2 (Type 2), JIS B 9705-1 (Category 2), JIS C 0508 (SIL1) |
| CEマーキング指令への準拠 | Machinery Directive, EMC Directive, RoHS Directive |
| 適用規格：欧州（EU） | EN 61496-1 (Type 2), EN 55011 |
| 制御出力（OSSD 1、OSSD 2） | PNP open-collector transistor- Max. source current: 200 mA- Applied voltage: same as supply voltage [between the control output (OSSD 1, OSSD 2) and +V]- Residual voltage: 2.5 V or less (sink current 200 mA) (when using 30.5 m100.066 ftlength cable) |
| 干渉防止機能 | Incorporated- Series connection: 3 sets max. (Total 128 beam channels). (However, SF2B-Ax allows up to a total of 96 beam channels when two sets are connected, and up to 64 beam channels when three sets are connected). (Note 1)SF2B-Hx and SF2B-Ax can be used together. (Note 2)[When using SF2B-CB05-B (optical synchronization):- Series connection: 3 sets max. (Total 128 beam channels). (However, SF2B-Ax allows up to a total of 96 beam channels when two sets are connected, and up to 64 beam channels when three sets are connected). (Note 1)- Parallel connection: 2 sets max.- Series and parallel mixed connection: Series connection of 3 sets max. and parallel connection of 2 sets max. are simultaneously possible.SF2B-Hx and SF2B-Ax can be used together. (Note 2)](Note 1) The SF2B-H8-x and SF2B-A4-x cannot be connected in series.(Note 2) When making series connection mixing SF2B-Hx and SF2B-Ax, calculate by doubling the number of optical axes only for SF2B-Ax, and make the total number of optical axes fall below 128 axes.(e.g.) When making series connection with SF2B-H36 and SF2B-A44, the total number of optical axes will be 124 axes. The number of optical axes for SF2B-H36 + (number of optical axes for SF2B-A44 × 2) = total number of optical axes. 36 optical axes + (44 optical axes × 2) = 124 optical axes. |
| 適用規格:北米 | UL 61496-1/2 (Type 2), UL 508, UL 1998 (Class 1), CSA C22.2 No.14, CSA C22.2 No.0.8, OSHA 1910.212 (Note), OSHA 1910.217 (C) (Note), ANSI B11.1 to B11.19, ANSI/RIA 15.06(Note) Not compatible when using the bottom cap cable SF2B-CB05-A. |
| 外部デバイス監視機能 | Incorporated |
| 補助出力（Aux）:動作モード | When using SF2B-CCBx or SF2B-CBx: OFF when OSSD ON, ON when OSSD OFFWhen using SF2B-CB05-A: ON during normal operation, OFF when there is a problem with emitter operation or emission is halted |
| 重量（送信機と受信機の合計） | 510 g approx. |
| 補助出力（Aux）:保護回路 | Incorporated |
| 適用規格：国際規格 | IEC 61496-1/2 (Type 2), ISO 13849-1 (Category 2, PLc), IEC 61508-1 to 7 (SIL1) |
| 環境耐性：保護等級 | IP65 (IEC) (*IP67 is later than Ver.2) |
| 制御出力（OSSD 1、OSSD 2）：動作モード | ON when all beam channels are received, OFF when one or more beam channels are interrupted (OFF also in case of any malfunction in the Safety Light Curtain or the synchronization signal) |
| 制御出力（OSSD1、OSSD2）：保護回路 | Incorporated |
| 耐環境性:絶縁耐電圧 | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
製品説明
More details
主な機能
- 産業グレードの品質
- RoHS準拠
- CE認証取得
- 1年保証
製品資料
データシート
技術仕様と性能データ
ユーザーマニュアル
設置・操作ガイド
