


| パラメータ | 価値 |
|---|---|
| アイテム | Specifications |
| PFHD | 1.66 × 10-10(Note:Probability of dangerous failure per hour) |
| MTTFD | 100 years or more(Note:Mean time to dangerous failure (in years)) |
| 重さ | Net weight: 250 g approx. |
| 詳細 | Applicantion expansion unit for the SF4B series |
| 製品 | Exclusive Control Unit for Safety Light Curtain |
| 材料 | Enclosure: ABS |
| 部品番号 | SF-C14EX |
| 製品名 | Exclusive Control Unit for Safety Light Curtain SF-C10 |
| 電源電圧 | 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| 製品番号 | SF-C14EX |
| 周囲の湿度 | 30 to 85 % RH, Storage: 30 to 95 % RH |
| 制御カテゴリ | ISO 13849-1 (EN ISO 13849-1, JIS B 9705-1) compliance up to Category 4, PLe standards |
| 耐衝撃性 | 30 G acceleration in X, Y and Z directions three times each |
| ミューティングランプ出力 | Applicable muting lamp: 24 V DC, 3.6 to 30 W (L1, L2 of each unit) |
| 周囲温度 | -10 to +55 ℃+14 to +131℉(No dew condensation or icing allowed),Storage: -25 to +70 ℃-13 to +158 ℉ |
| 接続端子 | Detachable spring-cage terminal |
| 消費電流 | 0.2 A or less (Excluding Safety light curtain and other external connecting device) |
| 耐振動性 | 10 to 55 Hz frequency, 0.35 mm0.014 indouble amplitude in X, Y and Z directions for two hours each |
| 絶縁抵抗 | 20 MOhm , or more, with 500 V DC megger between all supply terminals connected together and enclosure |
| 適用規格:日本 | JIS B 9704-1 (Type 4), JIS B 9705-1 (Category 4, PLe) |
| CEマーキング指令への準拠 | Machinery Directive, EMC Directive, RoHS Directive |
| 適用規格:欧州(EU) | EN 55011, EN ISO 13849-1 (Category 4, PLe) |
| 接続可能なセーフティライトカーテン | SF4B / SF4B-Gseries(Note:The handy-controllerSFB-HC(optional) cannot be used withSF-C14EX-01.) |
| 適用規格:北米 | ANSI/UL 61496-1 (Type 4), UL 1998 (Class 2) |
| ミューティングランプ出力:保護回路 | Incorporated |
| 適用規格:国際規格 | IEC 61496-1 (Type 4), IEC 61496 (Type 4),ISO 13849-1 (Category 4, PLe) |
| 環境耐性:保護等級 | Enclosure: IP40Terminal: IP20 |
| 耐環境性:絶縁耐電圧 | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| 安全出力(安全出力1、安全出力2、安全出力3) | PNP open-collector transistor 2 outputs × 3 or NPN open-collector transistor 2 outputs × 3 (selectable using a slider switch)<When PNP output is selected>・Maximum source current: 200 mA・Applied voltage: same as supply voltage(between the safety output and +V)・Residual voltage: 2 V or less (at 200 mA source current)<When NPN output is selected>・Maximum sink current: 200 mA・Applied voltage: same as supply voltage(between the safety output and 0 V)・Residual voltage: 2 V or less (at 200 mA sink current) |
| 安全出力(安全出力1、安全出力2、安全出力3):応答時間 | OFF response: 14 ms or less (Safety output 1 and 2: including the response time of the Safety light curtain)ON response: 90 ms or less (auto-reset) / 140 ms or less (manual reset) (Note)(Note) The auto-reset cannot be used with safety output 3. |
| 補助出力(補助出力1、補助出力2、補助出力3、補助出力4) | PNP open-collector transistor × 3 or NPN open-collector transistor × 3 (selectable using a slider switch)<When PNP output is selected>・Maximum source current: 60 mA・Applied voltage: same as supply voltage(between the auxiliary output and +V)・Residual voltage: 2 V or less (at 60 mA source current)<When NPN output is selected>・Maximum sink current: 60 mA・Applied voltage: same as supply voltage(between the auxiliary output and 0 V)・Residual voltage: 2 V or less (at 60 mA sink current) |
| 安全出力(安全出力1、安全出力2、安全出力3):動作モード(出力動作) | Safety output 1: ON when the safety light curtain is in light receiving condition, OFF when the safety light curtain is in light interrupted condition (Note 3)Safety output 2: ON when the safety light curtain is in light receiving condition or the muting function is validOFF when the safety light curtain is in light interrupted condition and the muting function is invalid (Note 3)Safety output 3: ON when the emergency stop is invalid, OFF when the emergency stop is valid |
| 安全出力(安全出力1、安全出力2、安全出力3):保護回路(短絡保護) | Incorporated |
| 補助出力(補助出力1、補助出力2、補助出力3、補助出力4):動作モード(出力動作) | Auxiliary output 1: ON when the muting function is invalid, OFF when the muting function is validAuxiliary output 2: ON when the override function is invalid, OFF when the override function is validAuxiliary output 3: ON when the muting lamp is normal, OFF when the muting lamp is errorAuxiliary output 4: ON when the light curtain is in light interrupted condition, OFF when the light curtain is in light receiving condition(Note:The auxiliary output incorporated in theSF4Bseries is output.) |
| 補助出力(補助出力1、補助出力2、補助出力3、補助出力4):保護回路(短絡保護) | Incorporated |
技術仕様と性能データ
設置・操作ガイド