SIUTCP2

Energy ManagementAccessoriesType SIU TCP 2• Virtual COM port serial device server(Serial Manager)• RS485 (2 wires) and RS232 serial port available• Auto detecting 10/100 Mbps Ethernet interface• Virtual COM software for Windows• Easy-to-use configuration software suite• Cigarette pack size• Wall and DIN-rail mounting• Built-in default key to restore factory default settings• Redundant dual DC power inputs for non stop operationProduct DescriptionHow to orderSIU TCP2The SIUTCP2 is a gateway between Ethernet (TCP/IP) and RS485 or RS232 serial communications. Data com- ing from the Ethernet (TCP/IP) is sent to the desig- nated RS485 or RS232 port and data being received from RS485 or RS232 port is senttotheEthernet(TCP/ IP) transparently. By encap- sulating serial data and trasportingitover ethernet,SIUTCP2 offersfull-duplex and bidirectionaldata.The SIUTCP2 allows to commu- nicate with a remote device both in the Intranet and Internet environment so the communication distance is increased. SIU TCP2 sup- portsTCPserver/client, UDP and VIRTUAL COM. SIU TCP2issuppliedwith an utility program (Serial Manager), a simple step-by-Modelstep installation software which allows to configure the network parameters ofSIUTCP2. The serial manager softwarepro- vides existing Windows based application to acces serial device by mapping the Virtual Comporttoa remoteserial server via Ethernet. Anyway the configuration can be also car- ried out through: the web-serv-er page, the Telnet Console. SIUTCP2 provides two power supply inputs which can be used simultaneously. If any of the powersuppliesfails, the other one powers the convert- er automatically. In this way an extra assurance of non stop operation is granted.Supply specificationDC supply 9 to 30VDC, DC 5VPower-on indicationLEDPower consumption300mA @ 9V (max)1,5 Watt maxAC/DC power supply adapter Not IncludedAD5V1A (US): American adapter on request 5V @ 1.25A AD5V1A (EU): European adapter on request 5V @ 1.25AInput/Output specificationsLANEthernet 10/100 MbpsConnectorRJ45 “Link” indication LEDOff: Ethernet disconnectedBlinking with green:Data is transmitting onEthernet for 100MbpsBlinking with Orange: Data is transmitting onEthernet for 10MbpsProtection Built-in 1.5kV magnetic isolationPortsTCP port 23 (Telnet)TCP port 4000 (firmware updating)TCP ports 950 and 966 (hostbased/driver mode) UDP port 1029 (broadcast, monitor)Virtual Serial COMConnectorMale DB9 “Ready” indication LED, greenOff: no data is trasmitting on COM port,Blinking: data is transmit-ting on COM port. RS485 (2 wires) signals Data+, Data-, GND Protection15kV ESD for all signalsSerial communication parameterParity None, even, odd, space, markData Bits7, 8Stop Bits1, 2Flow control RTS/CTS, XON/XOFF, NONE, DTR/DSRBaud rate 1200bps to 230kbpsProtection15kV ESDNodes and max distance1unit load up to 32 (1000m)ProtocolsTCP/IP, UDP, SNMP, HTTP, Telnet, ARP, BOOTP, DHCP, ICMPWindows compatibilityWindows XP, Vista, 7, serv- er 2003Run LEDRed LEDBlinking (rate 0.5 sec) firmware is running normal- lySpecifications are subject to change without notice SIUTCP 2 DS 170712 1