

| パラメータ | 価値 |
|---|---|
| 230 V AC | |
| 注記 | Class B |
| 色 | green |
| 深さ | 43 mm |
| 入力 | asymmetrical 4 kV (Test Level 4) |
| 幅 | 72 mm |
| 硬い | 0.2 mm² ... 2.5 mm² |
| 身長 | 90 mm |
| 出力 | asymmetrical 2 kV (Test Level 3) |
| LEDオフ | Supply voltage input AC not present (Off) |
| 電圧 | 10 V (Test Level 3) |
| コメント | Criterion A |
| ディレーティング | < 100 V AC ... 85 V AC (1 %/V) |
| 関数 | Visual operating state display |
| 位置 | 1.x |
| フレキシブル | 0.2 mm² ... 2.5 mm² |
| 頻度 | 50 Hz |
| 立ち上がり時間 | typ. 100 ms (UOut= 10 % ... 90 %) |
| EN 61010-1 | II (≤ 3000 m) |
| EN 62477-1 | III (≤ 2000 m) |
| 効率 | > 92.5 % (120 V AC) |
| 基準A | Normal operating behavior within the specified limits. |
| 基準B | Temporary impairment to operational behavior that is corrected by the device itself. |
| 基準C | Temporary adverse effects on the operating behavior, which the device corrects automatically or which can be restored by actuating the operating elements. |
| 電圧低下 | 70 % |
| リジッド(AWG) | 24 ... 14 (Cu) |
| 波高係数 | typ. 1.78 |
| 入力/出力 | asymmetrical |
| ネットワークタイプ | Star network |
| 製品タイプ | Power supply |
| 取り付けタイプ | DIN rail or direct mounting |
| 無負荷耐性 | yes |
| 識別 | UL 1310 Class 2 Power Units |
| 突入電流 | typ. 30 A (25 °C) |
| 騒音放出 | EN 55016 |
| ノイズ耐性 | EN 61000-6-2:2005 |
| 製品ファミリー | STEP POWER |
| スイッチオン時間 | typ. 2 s |
| 追加テキスト | Class 3 |
| 周波数範囲 | 0 kHz ... 2 kHz |
| 残留リップル | typ. 100 mVPP |
| 空中放電 | 8 kV (Test Level 3) |
| 水平ピッチ | 4 Div. (DIN 43880) |
| ハウジング材質 | Plastic |
| 最大高度 | ≤ 3000 m (> 2000 m, Derating: 10 %/1000 m) |
| フェーズ数 | 1.00 |
| ポジションマーキング | 1.1, 1.2 (L), 1.3, 1.4 (N) |
| 保護クラス | II (in closed control cabinet) |
| 信号閾値 | > 0,9 x UN(UN= 24 V DC) (LED lights up green) |
| 剥ぎ取り長さ | 10 mm (rigid/flexible) |
| 接続方法 | Push-in connection |
| 接触放電 | 6 kV (Test Level 3) |
| 制御偏差 | < 0.5 % (Static load change 10 % ... 90 %) |
| デバイスの主電源ヒューズ | 4 A internal (device protection), slow-blow |
| 取り付け位置 | horizontal DIN rail NS 35, EN 60715 |
| 期間数 | 25 periods |
| 出力電力(PN) | 90 W |
| ショック(操作) | 18 ms, 30g, per spatial direction (IEC 60068-2-27) |
| 保護回路 | Transient surge protection; Varistor |
| シグナル伝達の種類 | LED DC OK – signal state operation (UN= 24 V DC, IOut= IN) |
| 消費電流 | 1 A (100 V AC) |
| 汚染度 | 2 |
| 寸法図 | |
| フットラッチ材質 | Polyamid |
| 入力電圧範囲 | 100 V AC ... 240 V AC -15 % ... +10 % |
| 短絡防止 | yes |
| 試験場の強度 | 10 V/m (Test Level 3) |
| 直列接続 | yes, for increased output voltage |
| 保護の程度 | IP20 |
| 周波数範囲(fN) | 50 Hz ... 60 Hz ±10 % |
| 主電源バッファリング時間 | typ. 25 ms (120 V AC) |
| 標準指定 | Electrical safety |
| 組み立て説明書 | alignable: 0 mm horizontally, 30 mm vertically |
| 干渉放射 | Interference emission in accordance with EN 61000-6-3 (residential and commercial) and EN 61000-6-4 (industrial) |
| LED オン(緑)、DC OK | UOut>0.9 x UN(UN= 24 V DC) (on) |
| 低電圧指令 | Conformance with Low Voltage Directive 2014/35/EC |
| 規格・規制 | EN 61000-3-2 |
| 振動(操作) | < 15 Hz, amplitude ±2.5 mm (IEC 60068-2-6) |
| 並列接続 | yes, for increasing power and redundancy with diode |
| 公称出力電圧 | 24 V DC |
| PEへの放電電流 | < 0.25 mA |
| 保護コーティング付き | PCB only |
| 伝導ノイズの放出 | EN 55016 |
| 規格/仕様 | IEC 61010-1 (SELV) |
| 統合ヒューズ保護 | no |
| MTBF(IEC 61709、SN 29500) | > 2036000 h (25 °C) |
| フィードバック電圧抵抗 | ≤ 35 V DC |
| 公称出力電流(IN) | 3.75 A |
| 公称負荷時の電力損失最大。 | < 5.7 W (230 V AC) |
| 電磁両立性 | Conformance with EMC Directive 2014/30/EU |
| 突入電流積分(I2t) | typ. 0.35 A2s |
| 一般的な全国電力網電圧 | 120 V AC |
| 供給電圧の電圧タイプ | AC |
| 周囲温度(動作) | -10 °C ... 70 °C (Derating > 50°C: 2 %/K) |
| 絶縁電圧入力/出力 | 4 kV AC (type test) |
| 設置距離 右/左 | 0 mm / 0 mm |
| 設置距離上部/下部 | 30 mm / 30 mm |
| 最大無負荷電力損失 | < 0.21 W (230 V AC) |
| 最小無負荷電力損失 | < 0.21 W (120 V AC) |
| 環境保護指令 | RoHS Directive 2011/65/EU |
| UL 94準拠の難燃性評価 | V0 (Housing, terminal blocks, base latches) |
| 最小公称負荷消費電力 | < 7 W (120 V AC) |
| 周囲温度(保管/輸送) | -40 °C ... 85 °C |
| 入力保護用の推奨ブレーカー | 6 A ... 16 A (Characteristics B, C, D, K) |
| フレキシブル、フェルール付き、プラスチックスリーブ付き | 0.2 mm² ... 1 mm² |
| 周囲温度(始動タイプテスト済み) | -40 °C |
| プラスチックスリーブなしのフェルール付きフレキシブル | 0.5 mm² ... 1.5 mm² |
| 最大許容相対湿度(動作) | ≤ 95 % (non-condensing) |
| 出力過電圧保護(OVP) | < 35 V DC |
技術仕様と性能データ
設置・操作ガイド