

| パラメータ | 価値 |
|---|---|
| 33 V AC (2 A) | |
| ヒューズ | 2x 2.5 A on PCB, slow-blow (replaceable) |
| 深さ | 160 mm |
| ショック | 15g, according to IEC˽60068-2-27 |
| 幅 | 322 mm |
| 身長 | 170 mm |
| 一般的な | For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met. |
| 高度 | ≤ 2000 m |
| 絶縁 | Basic insulation |
| 出力名 | Switching output |
| 製品タイプ | Module carrier |
| 入力電流 | ≤ 2 A |
| 取り付けタイプ | DIN rail mounting |
| 識別 | UL 61010 Listed |
| ステータス表示 | 2x green LEDs (PWR1 and PWR2) |
| 汚染度 | 2 |
| 冗長供給 | yes, decoupled from diodes |
| 剥ぎ取り長さ | 7 mm |
| 接続方法 | Screw connection |
| 取り付け位置 | vertical, horizontal |
| 適切なI/Oカード | NFAI143 |
| 公称電圧UN | < 50 V DC (Per signal/channel) |
| ポジション数 | 6 |
| 定格サージ電圧 | 0.5 kV |
| 保護の程度 | IP00 |
| 過電圧カテゴリー | III |
| 組み立て説明書 | No end clamp |
| 接続数 | 1 |
| 規格・規制 | DIN EN 50178 |
| 振動(操作) | 2g, according to IEC 60068-2-6 |
| 接点スイッチングタイプ | 1 N/C contact (alarm = open) |
| 最大許容電流 | 1 A (Signal/channel) |
| 定格絶縁電圧 | 50 V |
| 最大スイッチング電圧 | 30 V DC (2 A) |
| 導体断面積 AWG | 24 ... 12 |
| 導体断面積は剛性 | 0.14 mm² ... 2.5 mm² |
| 周囲温度(動作) | -20 °C ... 70 °C (For use at an ambient temperature of up to 70°C: the MACX MCR-SL-RPSSI-2I modules must be mounted 5 mm apart. Use the CLIPFIX 35-5 end brackets provided as spacers.) |
| 導体断面積が柔軟 | 0.14 mm² ... 2.5 mm² |
| 許容湿度(動作) | 5 % ... 95 % (non-condensing) |
| 分極とサージ保護 | Yes |
| UL 94準拠の難燃性評価 | V0 |
| 周囲温度(保管/輸送) | -40 °C ... 80 °C (Please observe module specifications) |
技術仕様と性能データ
設置・操作ガイド