


| パラメータ | 価値 |
|---|---|
| アイテム | Specifications |
| ケーブル | 0.2 mm24-core cabtyre cable, 2 m6.562 ftlong |
| 出力 | NPN open-collector transistor- Maximum sink current: 100 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current) |
| 重さ | Net weight: 55 g approx.Gross weight: 65 g approx. |
| 詳細 | Adjustable range reflective |
| 製品 | Compact Photoelectric Sensor |
| 材料 | Enclosure: PBT (Polybutylene terephthalate)Front cover: PolycarbonateIndicator cover: Polycarbonate |
| ヒステリシス | 2 % or less of operation distance(with white non-glossy paper) |
| 保護 | IP67 (IEC) |
| 部品番号 | CX-444 |
| 製品名 | Compact Photoelectric Sensor CX-400 Ver.2 |
| センシングモード | BGS / FGS functions switchable with wiring of sensing mode selection input |
| 再現性 | Along sensing axis: 1 mm0.039 inor less, Perpendicular to sensing axis: 0.2 mm0.008 inor less (with white non-glossy paper) |
| 応答時間 | 1 ms or less |
| スポット径 | Ø9 mmØ0.354 inapprox.(at 100 mm 3.937 in distance) |
| 製品番号 | CX-444 |
| 供給電圧 | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| ケーブル延長 | Extension up to total 100 m328.084 ftis possible with 0.3 mm2, or more, cable. |
| 調整可能な範囲 | 20 to 100 mm0.787 to 3.937 in(Note) The adjustable range stands for the maximum sensing range which can be set with the distance adjuster. The sensor can detect an object 2 mm0.079 in[CX-444(-P): 15 mm0.591 in, CX-442(-P): 20 mm0.787 in], or more, away. |
| 周囲の湿度 | 35 to 85 % RH, Storage: 35 to 85 % RH |
| 耐衝撃性 | 500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each |
| 距離調整器 | 5-turn mechanical adjuster |
| 周囲照度 | Incandescent light: 3,000 lx or less at the light-receiving face |
| 周囲温度 | - 25 to +55℃-13 to +131℃ ℉(No dew condensation or icing allowed ), Storage: -30 to +70℃-22 to +158℃ ℉ |
| 消費電流 | 20 mA or less |
| 操作インジケーター | Orange LED (lights up when the output is ON) |
| 安定性インジケーター | Green LED(lights up under stable operating condition) |
| 耐振動性 | 10 to 500 Hz frequency, 3 mm0.118 inamplitude in X, Y and Z directions for two hours each |
| 絶縁抵抗 | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| 出力:出力操作 | Switchable either Detection-ON or Detection-OFF |
| 耐電圧性 | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| 発光素子(変調) | Red LED |
| CEマーキング指令への準拠 | EMC Directive, RoHS Directive |
| 出力:短絡保護 | Incorporated |
| 自動干渉防止機能 | Incorporated(Note) Note that detection may be unstable depending on the mounting conditions or the sensing object. In the state that this product is mounted, be sure to check the operation with the actual sensing object. |
| 検知範囲(白色無光沢紙使用時) | 15 to 100 mm0.591 to 3.937 in |
| 発光素子(変調):ピーク発光波長 | 650 nm0.026 mil |
技術仕様と性能データ
設置・操作ガイド