


| パラメータ | 価値 |
|---|---|
| アイテム | Specifications |
| 述べる | (Note:)measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20℃ +68℉. |
| 重さ | Net weight: 30 g approx., Gross weight: 95 g approx. |
| 詳細 | M12 connector type |
| 画面 | 4 digits + 4 digits 3-color LCD display (Display refresh rate: 250 ms, 500 ms, 1,000 ms, selectable by key operation) |
| 製品 | Dual Display Digital Pressure Sensor [For Gas] |
| 材料 | Enclosure: PBT (glass fiber reinforced), LCD display: Acrylic, Pressure port: Stainless steel (SUS303) , Mounting threaded part: Brass (nickel plated), Switch part: Silicone rubber |
| 保護 | IP40(IEC) |
| アクセサリー | Dedicated M12 connector cable, 0.3 m0.984 ftlong: 1 pc. |
| 部品番号 | DP-101ZL3-M-P-C |
| ケーブル長 | Total length up to 20 m65.617 ft(Condition of CE compliance less than 20 m65.617 ft)is possible with 0.3 mm2, or more, cable. |
| 製品名 | Dual Display Digital Pressure Sensor [For Gas] DP-100L |
| 圧力ポート | M5 female thread |
| 製品番号 | DP-101ZL3-M-P-C |
| 供給電圧 | 12 to 24 V DC ±10 % Ripple P-P 10 % or less |
| 周囲の湿度 | 35 to 85 % RH, Storage: 35 to 85 % RH |
| 適用流体 | Non-corrosive gas |
| 出力インジケーター | Orange LED(Output operation indicator 1: Flashes during IO-Link communication, Lights up when the control output is ON during non-IO-Link communication (synchronized with the output operation indicator 2)Output operation indicator 2: Lights up when the control output is ON) |
| 耐衝撃性 | 100 m/s2acceleration (10 G approx.) in X, Y and Z directions three times each |
| 圧力の種類 | Gauge pressure |
| 接続方法 | Connector |
| 消費電力 | Normal operation: 720 mW or less (Current consumption 30 mA or less at 24 V supply voltage)ECO mode: 480 mW or less at STD (Current consumption 20 mA or less at 24 V supply voltage)360 mW or less at FULL (Current consumption 15 mA or less at 24 V supply voltage) |
| 圧力範囲を設定する | -101.0 to +101.0kPa |
| 周囲温度 | -10 to +50℃+14 to +122 ℉(No dew condensation or icing allowed), Storage: -10 to +60℃+14 to +140 ℉ |
| 制御出力(DO) | PNP open-collector transistor•Maximum source current: 50 mA• Applied voltage: 30 V DC or less (between output and +V)• Residual voltage: 2 V or less (at 50 mA source current) |
| 定格圧力範囲 | -100.0 to +100.0 kPa |
| 耐振動性 | 10 to 500 Hz frequency, 3 mm0.118 indouble amplitude or maximum acceleration 196 m/s2, in X, Y and Z directions for two hours each(when panel or flat attachment is mounted: 10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude or maximum acceleration 49 m/s2, in X, Y and Z directions for two hours each) |
| 絶縁抵抗 | 50 MΩ or more with 500 V DC megger between all supply terminals connected together and enclosure |
| 耐電圧性 | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| 耐圧性 | 500kPa |
| 温度特性 | Within ±0.5 % F.S.(at +20℃+68℉) |
| 制御出力(DO):ヒステリシス | Minimum 1 digit (variable) |
| 制御出力(DO):再現性 | ±0.1 % F.S. (within ±2 digits) |
| 制御出力(DO):応答時間 | 2.5 ms, 5 ms, 10 ms, 25 ms, 50 ms, 100 ms, 250 ms, 500 ms, 1,000 ms, 5,000 ms, selectable by key operation |
| 表示:表示可能な圧力範囲 | -101.0 to +101.0 kPa |
| 通信出力(C/Q):ボーレート | COM3 (230.4 kbps)(Note:)When the sensor is used as an ordinary sensor, the communication output (C/Q) provides the same output operation as the control output (DO). |
| 制御出力(DO):出力操作 | N.O./N.C. (selectable by key operation) |
| 通信出力(C/Q):プロセスデータ | 4 byte(Note:)When the sensor is used as an ordinary sensor, the communication output (C/Q) provides the same output operation as the control output (DO). |
| 規制遵守と認証 | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), UL/c-UL Certification |
| 制御出力(DO):短絡保護 | Incorporated |
| 通信出力(C/Q):最小サイクルタイム | 1.0ms(Note:)When the sensor is used as an ordinary sensor, the communication output (C/Q) provides the same output operation as the control output (DO). |
| 通信出力(C/Q):IO-Link通信 | IO-Link Specification V1.1(Note:)When the sensor is used as an ordinary sensor, the communication output (C/Q) provides the same output operation as the control output (DO). |
| 制御出力(DO):出力操作出力モード | EASY mode / Hysteresis mode / Window comparator mode |
技術仕様と性能データ
設置・操作ガイド