在庫あり 注目商品
UDPHL114
UDPHL114 DPH-L114 PANASONIC Sensor head DPH-L114 for positive pressure, 0 to 10MPa, R1/4 male thread, cable ..
$0.00米ドル
4956 在庫あり
主な仕様
アイテム:Specifications
ケーブル:0.2 mm23-core heat resistant cabtyre cable 2 m3.562 ftlong
述べる:Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃+73.4 ℉.The sensor head can be used independently.Oil is used in the factory inspection process for models DPH-L114 and DPH-L154. There may be some residual oil inside the pressure port.
重さ:Net weight : 100 g approx., Gross weight : 150 g approx.
サプライヤー情報
PANASONIC
製品: 4316
通常、2〜3営業日以内に出荷します
品質保証済み
高速配送
テクニカルサポート
技術仕様
| パラメータ | 価値 |
|---|---|
| アイテム | Specifications |
| ケーブル | 0.2 mm23-core heat resistant cabtyre cable 2 m3.562 ftlong |
| 述べる | Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃+73.4 ℉.The sensor head can be used independently.Oil is used in the factory inspection process for models DPH-L114 and DPH-L154. There may be some residual oil inside the pressure port. |
| 重さ | Net weight : 100 g approx., Gross weight : 150 g approx. |
| 詳細 | Sensor head |
| 製品 | Head-separated Dual display Digital Pressure Sensor [For gas & liquid] |
| 材料 | Diaphragm : Stainless steel (SUS603), Pressure port : Stainless steel (SUS304), Throttle : Stainless steel (SUSXM7) |
| 保護 | IP67 (IEC) |
| アクセサリー | Connector (e-CON) : 1 pc. |
| 部品番号 | DPH-L114 |
| 製品名 | Head-separated Dual display Digital Pressure Sensor [For gas & liquid] DPC-L100 / DPH-L100 |
| 圧力ポート | R1/4 male thread (throttle embeded) |
| 応答時間 | 1 ms or less |
| 製品番号 | DPH-L114 |
| 供給電圧 | 9 to 36 V DC[9 to 32 V DC when using the attached connector (e-CON)] |
| ケーブル延長 | Extension up to total 10 m32.808 ftis possible with 0.2 mm2, or more, cable. |
| 周囲の湿度 | 35 to 85 % RH, Storage : 35 to 85 % RH |
| 適用流体 | Gases and fluids that do not corrode stainless steel SUS630, SUS304, or SUSXM7 |
| 接地方法 | Capacitor earth (Enclosure-supply terminal) |
| 耐衝撃性 | 1,000 m/s2acceleration in X, Y and Z directions three times each |
| 圧力の種類 | Sealed gauge pressure(Note): The sensor's internal mechanism is sealed based on an air pressure of 1,013 hPa. |
| 接続方法 | Connector |
| 周囲温度 | -20 to +80 ℃ (Pressure port: -20 to +125 ℃\n-4 to +257 ℉, No dew condensation or icing allowed),\n Storage: -30 to +100 ℃-22 to +212 ℉\n[e-CON connector (accesory):-20 to +75 ℃\n-4 to +167 ℉\n(Storage: -30 to +75 ℃-22 to +167 ℉)] |
| 消費電流 | 20 mA or less |
| 定格圧力範囲 | 0 to +10 MPa |
| 耐振動性 | 10 to 2,000 Hz frequency, acceleration 200 m/s2, in X direction for four hours, in Y and Z directions for two hours each(Note): The X, Y, and Z directions are defined as follows : |
| アナログ電圧出力 | Output voltage: 1 to 5 V DC (over rated pressure range)\n Accuracy: ±1.0 % F.S. (at 23 ±2 ℃+73.4 ±35 ℉)\n ±2.0 % F.S. (at -20 to 125 ℃-4 to +257 ℉)\n (including linearity, hysteresis and repeatability) |
| 絶縁抵抗 | 100 MΩ, or more, with 50 V DC megger between all supply terminals connected together and enclosure |
| 適用される規制 | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
| 中温域 | -20 to +125 ℃-4 to +257 ℉ |
| 耐電圧性 | 150 V AC for one min. between all supply terminals connected together and enclosure |
| 耐圧性 | 20 MPa |
製品説明
Sensor head, positive pressure. 0 to 10MPa. R1/4 male pressure port.
主な機能
- 産業グレードの品質
- RoHS準拠
- CE認証取得
- 1年保証
製品資料
データシート
技術仕様と性能データ
ユーザーマニュアル
設置・操作ガイド
