


| パラメータ | 価値 |
|---|---|
| アイテム | Specifications |
| 重さ | Net weight : 330 g approx. |
| 詳細 | Head |
| 製品 | Pulse AC Method Area Ionizer |
| 材料 | Main unit enclosure: PPS, Stainless steal (SUS)Head mounting bracket: Stainless steal (SUS)Discharge needle: Tungsten |
| イオンバランス | plus or minus 30 V or less(Note: In condition of discharge distance 100 mm 3.937 in, center of the product, discharge wavelength 50 Hz and no air supply.)(Note: Ion balance is average of plus and minus. Also, the specification value is typical value in condition of less than plus or minus 10 degrees ambient temperature change, set the ion balance after 30 minutes of the discharge starting, switching on the ion balance control function.) |
| 部品番号 | ER-X008 |
| 製品名 | Pulse AC Method Area Ionizer ER-X |
| 製品番号 | ER-X008 |
| 周囲の湿度 | 35 to 65 % RH, Storage: 35 to 85 % RH |
| 適用流体 | Air (dried clean air)(Note:The dried clean air is dried (dew point: equivalent of -20 degrees ) and filtered (mesh-size: equivalent of 0.01 micro m) air.) |
| 排出方法 | Pulse AC method |
| オゾン生成 | 0.01 ppm or less |
| 耐衝撃性 | 100 m/s2 acceleration (10 G approx.), in X, Y and Z directions three times each |
| 筐体アース | Floating |
| 動作高度 | 2,000 m6561.68 ftor less(Note:Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m.) |
| 周囲温度 | 0 to +50 degrees +32 to +122 degrees Fahrenheit (No dew condensation), Storage: -10 to +65 degrees +14 to +149 degrees Fahrenheit |
| 電荷除去時間 | 1 second or less(Note: In condition of discharge distance 100 mm 3.937 in, center of the product, discharge wavelength 50 Hz and no air supply.) |
| 放電頻度 | 50 Hz / 30 Hz / 20 Hz / 10 Hz / 5 Hz / 1 Hz |
| 最大空気圧 | 0.5 MPa |
| 耐振動性 | 10 to 55 Hz frequency, 0.75 mm0.030 indouble amplitude in X, Y and Z directions for two hours each |
| 適用される規制 | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), TÜV SÜD certification (USA, Canada) |
| 放電出力電圧 | ±7,000 V approx. |
| 高電圧ケーブルの長さ | 0.5 m1.640 ft |
| 有効電荷除去幅 | 80 mm 3.150 in approx. |
技術仕様と性能データ
設置・操作ガイド