サービス時間: 月曜日~金曜日 9:00-18:00
UERXC02 - UERXC02 ER-XC02 PANASONIC Controller for ER-X-ionizer-heads, number of heads connected max. 2 units, power s..
在庫あり 注目商品

UERXC02

UERXC02 ER-XC02 PANASONIC Controller for ER-X-ionizer-heads, number of heads connected max. 2 units, power s..

$0.00米ドル
3181 在庫あり
主な仕様
アイテム:Specifications
重さ:Net weight : 130 g approx.
詳細:Controller
製品:Pulse AC Method Area Ionizer
サプライヤー情報
PANASONIC
PANASONIC
製品: 4316
通常、2〜3営業日以内に出荷します
品質保証済み
高速配送
テクニカルサポート

技術仕様

パラメータ価値
アイテムSpecifications
重さNet weight : 130 g approx.
詳細Controller
製品Pulse AC Method Area Ionizer
材料Enclosure: ABS
指標Displays status of Head 1 and 2
アクセサリーPower supply / I/O connector: 1 set (Housing 5557-10R, Terminal 5556TL [manufactured by Molex])Ground wire (3.7 m 12.139 ft approx.): 1 pc.
部品番号ER-XC02
製品名Pulse AC Method Area Ionizer ER-X
製品番号ER-XC02
供給電圧24 V DC ±10 %
周囲の湿度35 to 65 % RH, Storage: 35 to 85 % RH
耐衝撃性100 m/s2 acceleration (10 G approx.) in X, Y and Z directions three times each
筐体アースFloating
周囲温度0 to +50 °C +32 to +122 °F (No dew condensation),Storage: -10 to +65 °C +14 to +149 °F
消費電流450 mA or less when connecting 1 heads, 800 mA or less when connecting 2 heads
インジケーター:レベルメーターGreen LED (5 levels, lights up depending on amount of the charge or ion generation)
耐振動性10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude in X, Y and Z directions for two hours each
絶縁抵抗20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
適用される規制CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), TÜV SÜD certification (USA, Canada)
インジケーター:チェック(CHECK)Orange LED (lights up when dirt, wear, etc. of the discharge needle is detected)
インジケーター:エラー (ERROR)Red LED (lights up when abnormal discharge is detected)
耐電圧性1,000 V AC for one min. between all supply terminals connected together and enclosure
接続されているヘッドの数Maximum 2 units
インジケーター:放電(DSC)Green LED (lights up when discharging)
放電制御入力(DSC OFF)Discharge allowed: Open,Discharge halt: 24 V or 0 V shorted
出力[ALARM, ERROR,COM(共通)]PhotoMOS relay output• Maximum load current: 100 mA• Applied voltage: 30 V DC or less (between output-output common)• Residual voltage: 1.5 V or less (at load current of 100 mA)
出力[ALARM, ERROR,COM(共通)]:出力操作ALARM:ON when dirt or wear of the discharge needle is detected;OFF when operation is normal.ERROR:OFF when abnormal discharge is detected;ON when operation is normal.
出力[ALARM、ERROR、COM(共通)]:短絡保護Incorporated (automatic reset type)

製品説明

Controller for ER-X ionizer, number of sensor heads to connect max. 2 pcs., 24VDC power supply
主な機能
  • 産業グレードの品質
  • RoHS準拠
  • CE認証取得
  • 1年保証

製品資料

データシート

技術仕様と性能データ

ユーザーマニュアル

設置・操作ガイド

Top