


| パラメータ | 価値 |
|---|---|
| アイテム | Specifications |
| ケーブル | 0.1 mm23-core (emitter: 2-core) cabtyre cable, 2 m6.562 ftlong |
| 出力 | NPN open-collector transistor- Maximum sink current: 50 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 2 V or less (at 50 mA sink current),1 V or less (at 16 mA sink current) |
| 重さ | Net weight: 20 g approxGross weight: 40 g approx |
| 詳細 | Convergent reflective (Diffused beam type) [Front sensing] |
| 製品 | Ultra-slim Photoelectric Sensor |
| 材料 | Enclosure: Polyethylene terephthalateLens: Polyalylate |
| アクセサリー | Mounting screws: 1 set |
| ヒステリシス | 15 % or less of operation distance(Note) The sensing range and the hysteresis are specified for white non-glossy paper (50 × 50 mm 1.969 × 1.969 in) as the object. |
| 保護 | IP67 (IEC) |
| 部品番号 | EX-14A |
| 製品名 | Ultra-slim Photoelectric Sensor EX-10 |
| 応答時間 | 0.5 ms or less |
| 検知範囲 | 2 to 25 mm 0.079 to0.984 in(Conv. point: 10 mm 0.394 in)(Note) The sensing range and the hysteresis are specified for white non-glossy paper (50 × 50 mm 1.969 ×1.969 in) as the object. |
| 製品番号 | EX-14A |
| 供給電圧 | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| ケーブル延長 | Extension up to total 50 m164.042 ftis possible with 0.3 mm2, or more, cable. |
| 周囲の湿度 | 35 to 85 % RH, Storage: 35 to 85 % RH |
| 発光要素 | Red LED (Peak emission wavelength: 680 nm0.027 mil, modulated) |
| 汚染度 | 3 (Industrial environment) |
| 耐衝撃性 | 500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each |
| 周囲照度 | Incandescent light: 3,000 lx or less at the light-receiving face |
| 周囲温度 | -25 to +55 ℃ -13 to +131 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉ |
| 消費電流 | 13 mA or less |
| 最小検知物体 | ø0.1 mmø0.004 incopper wire (Completely beam interrupted object) (Setting distance: 10 mm0.394 in) |
| 操作インジケーター | Orange LED (lights up when the output is ON) |
| 安定性インジケーター | Green LED (lights up under stable light received condition or stable dark condition) |
| 耐振動性 | 10 to 500 Hz frequency, 3 mm0.118 indouble amplitude (20 G max.) in X, Y and Z directions for two hours each |
| 絶縁抵抗 | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| 入射ビームインジケーター | - |
| 耐電圧性 | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| 出力:利用カテゴリ | DC-12 or DC-13 |
| CEマーキング指令への準拠 | EMC Directive, RoHS Directive |
| 出力:短絡保護 | Incorporated |
| 繰り返し精度(センシング軸に垂直) | 0.1 mm0.004 inor less |
技術仕様と性能データ
設置・操作ガイド