


| パラメータ | 価値 |
|---|---|
| アイテム | Specifications |
| ケーブル | 0.1 mm2 3-core cabtyre cable, 2 m 6.562 ft long |
| 出力 | NPN open-collector transistor- Maximum sink current: 50 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 2 V or less (at 50 mA sink current), 1 V or less (at 16 mA sink current) |
| 重さ | Net weight: 20 g approxGross weight: 45 g approx |
| 詳細 | Retroreflective[Side sensing] |
| 製品 | Ultra-compact Photoelectric Sensor |
| 材料 | Enclosure: Polyethylene terephthalateLens: Polyalylate |
| アクセサリー | RF-200 (Reflector): 1 pcAdjusting screwdriver: 1 pc |
| ヒステリシス | - |
| 保護 | IP67 (IEC) |
| 部品番号 | EX-29A |
| 製品名 | Ultra-compact Photoelectric Sensor EX-20 Ver.2 |
| 応答時間 | 0.5 ms or less |
| 検知範囲 | 30 to 200 mm 1.181 to 7.874 in(Note) The sensing range and the sensing object of the retroreflective type sensor are specified for the RF-200 reflector. Further, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 30 mm 1.181 in away. However, if the reflector is set 100 mm 3.937 in or less away, the sensing object should be opaque. |
| 製品番号 | EX-29A |
| 検知対象 | dia. 15 mm dia. 0.591 in or more opaque or translucent object(Note) The sensing range and the sensing object of the retroreflective type sensor are specified for the RF-200 reflector. Further, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 30 mm 1.181 in away. However, if the reflector is set 100 mm 3.937 in or less away, the sensing object should be opaque.(Note) Make sure to confirm detection with an actual sensor before use. |
| 供給電圧 | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| ケーブル延長 | Extension up to total 50 m 164.042 ft is possible with 0.3 mm2, or more, cable. |
| 周囲の湿度 | 35 to 85 % RH, Storage: 35 to 85 % RH |
| 発光要素 | Red LED (modulated) |
| 耐衝撃性 | 500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each |
| 周囲照度 | Incandescent light: 3,000 lx or less at the light-receiving face |
| 周囲温度 | -25 to +55 degrees -13 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit |
| 消費電流 | 13 mA or less |
| 操作インジケーター | Orange LED (lights up when the output is ON) |
| 安定性インジケーター | Green LED (lights up under stable light received condition or stable dark condition) |
| 感度調整器 | Continuously variable adjuster |
| 耐振動性 | 10 to 500 Hz frequency, 3 mm0.118 indouble amplitude (20 G max.) in X, Y and Z directions for two hours each |
| 絶縁抵抗 | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| 操作モードスイッチ | - |
| 耐電圧性 | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| 出力:利用カテゴリ | DC-12 or DC-13 |
| CEマーキング指令への準拠 | EMC Directive, RoHS Directive |
| 出力:短絡保護 | Incorporated |
| 発光素子:ピーク発光波長 | 680 nm 0.027 mil |
| 繰り返し精度(センシング軸に垂直) | 0.5 mm 0.020 in or less |
技術仕様と性能データ
設置・操作ガイド