


| パラメータ | 価値 |
|---|---|
| アイテム | Specifications |
| ケーブル | 0.1 mm23-core (emitter: 2-core) cabtyre cable, 2 m6.562 ftlongNote:The bending-resistant cable type has a 0.1 mm23-core (thru-beam type emitter: 2-core) bending-resistant cabtyre cable, 2 m6.562 ftlong. |
| 出力 | PNP open-collector transistor- Maximum source current: 20 mA- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 1.5 V or less (at 20 mA source current) |
| 述べる | Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃73 ℉. |
| 重さ | Net weight (each emitter and receiver) : 15 g approx.Gross weight: 35 g approx. |
| 詳細 | Thru-beam [Front sensing] |
| 製品 | Ultra-minute Photoelectric Sensor |
| 材料 | Enclosure: PBTLens: PolycarbonateMetallic part: Stainless steel (SUS304)(SUS301 for rear side of front sensing type) |
| アクセサリー | M2 mounting screws: 1 set (front sensing type: 6 mm0.236 inin length; side sensing type: 10 mm0.394 inin length) |
| 接地 | Floating |
| 保護 | IP67 (IEC) |
| 部品番号 | EX-Z13FB-P-R |
| 製品名 | Ultra-minute Photoelectric Sensor EX-Z |
| 応答時間 | 0.5 ms or less |
| 検知範囲 | 500 mm19.685 in |
| 製品番号 | EX-Z13FB-P-R |
| 供給電圧 | 12 to 24 V DC ±10 % Ripple P-P 10 % or less |
| ケーブル延長 | Extension up to total 50 m164 ftis possible with 0.3 mm2, or more, cable (both emitter and receiver) . |
| 周囲の湿度 | 35 to 85 % RH, Storage: 35 to 85 % RH |
| 発光要素 | Red LED (Peak emission wavelength: 650 nm0.026 mil, modulated) |
| 出力操作 | Dark-ON |
| 耐衝撃性 | 500 m/s2acceleration (50 G approx.) in X, Y and Z directions for three times each |
| 周囲照度 | Incandescent light: 5,000 ℓx at the light-receiving face |
| 周囲温度 | -10 to +55 ℃14 to +131 ℉(No dew condensation or icing allowed), Storage: -30 to +70 ℃-22 to +158 ℉ |
| 消費電流 | Emitter: 10 mA or lessReceiver: 10 mA or less |
| 最小検知物体 | ø1.0 mmø0.039 inopaque object (Completely beam interrupted object)(Setting distance between emitter and receiver: 500 mm19.685 in) |
| 操作インジケーター | Orange LED (Lights up when the sensing output is ON) |
| 安定性インジケーター | Green LED (Lights up under the stable light received condition or the stable dark condition) |
| 耐振動性 | 10 to 500 Hz frequency, 3 mm0.118 inamplitude in X, Y and Z directions for two hours each |
| 絶縁抵抗 | 20 MΩ or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| 耐電圧性 | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| 出力:短絡保護 | Incorporated |
| 適用される規制と認証 | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), UL/c-UL Certification |
| 繰り返し精度(センシング軸に垂直) | 0.05 mm0.002 inor less |
技術仕様と性能データ
設置・操作ガイド