


| パラメータ | 価値 |
|---|---|
| アイテム | Specifications |
| ケーブル | 0.15 mm23-core oil, heat and cold resistant cabtyre cable, 1 m3.281 ftlong |
| 出力 | PNP open-collector transistor- Maximum source current: 100 mA- Applied voltage: 30 V DC or less(between output and +V)- Residual voltage: 2 V or less (at 100 mA source current) |
| 詳細 | PNP output |
| 製品 | Rectangular-shaped Inductive Proximity Sensor |
| 材料 | Enclosure: PBTIndicator part: Polyester |
| ヒステリシス | 20 % or less of operation distance(with standard sensing object) |
| 正味重量 | 15 g approx. |
| 保護 | IP68 (IEC), IP68g (JEM)(Note) Panasonic Electric Works SUNX's IP68 test method1. Immerse at 0 m below 0 ℃+32 ℉water surface and leave for 30 min. Then, immerse at 0 m below +70 ℃+158 ℉water surface and leave for 30 min.2. Regard the heat shock test in 1 as one cycle and perform 20 cycles.3. Leave in water at a depth of 1 m3.281 ftin water for 500 hours.4. After tests 1 to 3, insulation resistance, voltage withstandability, current consumption, and sensing ranges must meet the standard values.(Note) If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil. |
| 部品番号 | GX-F8B-P |
| 製品名 | Rectangular-shaped Inductive Proximity Sensor GX-F/H |
| 再現性 | Along sensing axis, perpendicular to sensing axis: 0.04 mm0.002 inor less |
| 製品番号 | GX-F8B-P |
| 供給電圧 | 12 to 24 V DC +10/-15 % Ripple P-P 10 % or less |
| ケーブル延長 | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. |
| 周囲の湿度 | 45 to 85 % RH, Storage: 35 to 95 % RH |
| 耐衝撃性 | 10,000 m/s2acceleration (1,000 G approx.) in X, Y and Z directions three times each |
| 周囲温度 | -25 to +70 ℃-13 to +158 ℉, Storage: - 40 to +85 ℃- 40 to +185 ※ |
| 消費電流 | 15 mA or less |
| 操作インジケーター | Orange LED(lights up when the output is ON) |
| 安定した検知範囲 | 0 to 2.1 mm0 to 0.083 in(Note) The stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient temperature drift and/or supply voltage fluctuation. |
| 耐振動性 | 10 to 500 Hz frequency, 3 mm0.118 indouble amplitude (Max. 20 G) in X, Y and Z directions for two hours each |
| 絶縁抵抗 | 50 MΩ , or more, with 500 V DC megger between all supply terminals connected together and enclosure |
| 最大動作距離 | 2.5 mm0.098 inplus or minus 8 %(Note) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object. |
| 最大応答周波数 | 500 Hz |
| 出力:出力操作 | Normally closed |
| 標準検知対象 | Iron sheet 15 × 15 × t 1 mm0.591 × 0.591 × t 0.039 in |
| 耐電圧性 | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| 出力:利用カテゴリ | DC-12 or DC-13 |
| 適用される規制と認証 | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
| 検知範囲の変動:電圧特性 | Within plus or minus 2 % for +10/-15 % fluctuation of the supply voltage |
| 検知範囲の変化:温度特性 | Over ambient temperature range -25 to +70 ℃ -13 to +158degrees Fahrenheit: Within plus or minus 8 % of sensing range at +23 ℃ +73 ℉ |
技術仕様と性能データ
設置・操作ガイド