在庫あり 注目商品
UHLC2CEP
UHLC2CEP HL-C2CE-P PANASONIC Control unite HL-C2, low resolution, -5 to +5V, 4-20mA, PNP-type
$0.00米ドル
4400 在庫あり
主な仕様
アイテム:Specifications
重さ:450 g approx.
詳細:Controller
製品:Ultra High-speed High-precision Laser Displacement Sensor
サプライヤー情報
PANASONIC
製品: 4316
通常、2〜3営業日以内に出荷します
品質保証済み
高速配送
テクニカルサポート
技術仕様
| パラメータ | 価値 |
|---|---|
| アイテム | Specifications |
| 重さ | 450 g approx. |
| 詳細 | Controller |
| 製品 | Ultra High-speed High-precision Laser Displacement Sensor |
| 材料 | Case: Polycarbonate |
| アクセサリー | USB cable (2 m 6.562 ft long): 1 pc.Short bracket: 1 pc. |
| 部品番号 | HL-C2CE-P |
| 入力をリセット | Reset is done when connected to external power (+).Applied voltage: 30 V DC or less(Leak current: 0.1 mA or less) |
| アラーム出力 | PNP open-collector transistor- Maximum source current: 100 mA- Applied voltage: 30 V DC or less(between alarm output and +V)- Residual voltage: 1 V or less(at 100 mA source current) |
| 製品名 | Ultra High-speed・High-precision Laser Displacement Sensor HL-C2 |
| タイミング入力 | ON at/during connection to external power (+)(depending on analysis mode)Applied voltage: 30 V DC or less(Leak current: 0.1 mA or less) |
| サンプリングレート | 10 micro s, 20 micro s, 40 micro s, 100 micro s, 200 micro s, 400 micro s, 1 ms, 2 ms |
| ストロボ出力 | PNP open-collector transistor- Maximum source current: 100 mA- Applied voltage: 30 V DC or less(between strobe output to +V)- Residual voltage: 1 V or less(at 100 mA source current) |
| 製品番号 | HL-C2CE-P |
| 供給電圧 | 24 V DC plus or minus 10 % including ripple 0.5 V (P-P) |
| ゼロセット入力 | Zero set is ON when connected with external power (+).Zero set turns to OFF after continuously connected to external power (+) for one second.Applied voltage: 30 V DC or less (Leak current: 0.1 mA or less) |
| インジケーター：電源 | Green LED (lights up at power on) |
| 消費電流 | 500 mA approx. at 2 sensor heads connected350 mA approx. at 1 sensor head connected(100 mA approx. is additionally required when the mini console is connected) |
| インジケータ：アラーム1 | Red LED (lights up when OUT1 can not be measured due to insufficient amount of light) |
| インジケーター：アラーム2 | Red LED (lights up when OUT2 can not be measured due to insufficient amount of light) |
| レーザー制御入力 | Laser emission is stopped when connected to external power (+).Laser is emitted immediately after opened.Applied voltage: 30 V DC or less(Leak current: 0.1 mA or less) |
| メモリ変更入力 | Memory is specified when connected to external power (+).Applied voltage: 30 V DC or less(Leak current: 0.1 mA or less) |
| センサーヘッドの接続 | Number of connectable units: Max. 2 units. |
| リモートインターロック入力 | Laser emission is delayed when connected to IL (+).Laser emission stop at openApplied voltage: 30 V DC or less(Leak current: 0.1 mA or less) |
| アナログ出力：電流 | Current output scale: 4 to 20 mA/F.S (initial value)Output range during normal status: 2 to 24 mAOutput at abnormal status: 1 mA or 25 mAResolution: 3 micro A, Linearity plus or minus 0.05% F.S.Load impedance: 250 Ohm max., Response delay time: 10 micro s approx.(Note) The linearity is F.S.=16 mA to digital measurement value. Response delay time is the period after update of measurement value. |
| アナログ出力：電圧 | Voltage output scale: -5 to +5 V/F.S (initial value)Output range during normal status: -10.0 to +10.0 VOutput at abnormal status: -10.8 V or +10.8 VResolution: 2 mV, Linearity: plus or minus 0.05 % F.S.Max. 2 mA, output impedance 50 Ohm , Response delay time: 1.5 micro s/V approx.(Note) The linearity is F.S.=20 V to digital measurement value. Response delay time is the period after update of measurement value. |
| 判定出力（HI、GO、LO） | PNP open-collector transistor- Maximum source current: 100 mA- Applied voltage: 30 V DC or less(between judgment output to +V)- Residual voltage: 1 V or less(at 100 mA source current) |
| 警報出力：出力動作 | Opened when the amount of light is insufficient |
| ストロボ出力：出力動作 | Opened at data determination |
| 警報出力：短絡保護 | Incorporated |
| ストロボ出力：短絡保護 | Incorporated |
| インジケーター：センサーヘッドAレーザー放射 | Green LED (lights up during or immediately before laser emission of sensor head A) |
| インジケーター：センサーヘッドBレーザー放射 | Green LED (lights up during or immediately before laser emission of sensor head B) |
| 耐環境性：周囲湿度 | 35 to 85 %RH |
| 耐環境性：耐衝撃性 | 196 m/s2 acceleration (20 G approx.) in X,Y and Z directions for three times each |
| 耐環境性：周囲温度 | 0 to +50 degrees +32 to +122 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -20 to +70 degrees -4 to +158 degrees Fahrenheit |
| 判定出力（HI、GO、LO）：出力動作 | Opened at output operation |
| 耐環境性：耐振動性 | 10 to 55 Hz frequency (period: 1 min.), 0.75 mm 0.030 in amplitude in X, Y and Z directions for 30 min. each |
| 判定出力（HI、GO、LO）：短絡保護 | Incorporated |
製品説明
High performance analog laser low resolution controller, HL-C2 series, RS232 port, analog output ±5V/ 4 - 20mA, PNP digital output
主な機能
- 産業グレードの品質
- RoHS準拠
- CE認証取得
- 1年保証
製品資料
データシート
技術仕様と性能データ
ユーザーマニュアル
設置・操作ガイド
